Internet-Draft An HTTP Cache Invalidation API August 2023
Nottingham Expires 22 February 2024 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-nottingham-http-invalidation-01
Published:
Intended Status:
Standards Track
Expires:
Author:
M. Nottingham

An HTTP Cache Invalidation API

Abstract

This document specifies an HTTP-based API that gateway caches (such as those in reverse proxies and content delivery networks) can expose to allow origin servers to their invalidate stored responses.

About This Document

This note is to be removed before publishing as an RFC.

Status information for this document may be found at https://datatracker.ietf.org/doc/draft-nottingham-http-invalidation/.

information can be found at https://mnot.github.io/I-D/.

Source for this draft and an issue tracker can be found at https://github.com/mnot/I-D/labels/http-invalidation.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 22 February 2024.

Table of Contents

1. Introduction

Section 4.4 of [HTTP-CACHING] defines invalidation as the side effect of a state-changing request on one or more stored responses in an HTTP cache.

In practice, it has become common for caches to allow invalidation to be triggered through other mechanisms -- often, using a dedicated HTTP API. This is especially useful for caches that have a relationship with the origin server and wish to offer them finer-grained control, as is the case for reverse proxies and content delivery networks.

While many such APIs already exist, they are proprietary. That makes it difficult for the origin server or its delegates (for example, content management systems) to take advantage of those facilities, because each integration needs to created and maintained, hindering interoperability.

This document standardises an HTTP-based API for HTTP cache invalidation. Section 2 describes an HTTP resource that accepts requests to invalidate stored responses, using a format described in Section 3.

1.1. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2. HTTP Cache Invalidation Resources

An HTTP Cache Invalidation Resource (hereafter, 'invalidation resource') is an HTTP resource (Section 3.1 of [HTTP]) that has the behaviours described in this section.

Invalidation resources SHOULD require requests to include some form of authentication. The specific mechanism is out of scope for this document, but note that [DESCRIPTION] describes a way to specify a mechanism and credentials in the description format.

When an invalidation resource receives a POST request whose content is in the format described in Section 3, its expected behaviour will be to process the request and invalidate the responses it indicates that are stored in the cache(s) associated with it.

As described in Section 4.4 of [HTTP-CACHING]:

This includes all responses for the URI, including those who have cache keys that include information derived from the Vary response field (see Section 4.1 of [HTTP-CACHING]).

The authenticated user MUST be authorized to perform each invalidation. Unauthorized invalidations MUST be ignored; future extensions might allow description of which invalidations succeeded or failed.

Furthermore, some features in the event format described in Section 3 are not required to be implemented; for example, some event selector types might not be supported, or the "purge" member might not be supported. An invalidation resource that receives a request using an unsupported feature SHOULD respond with a 501 (Not Implemented) status code.

TODO: specify a problem details object for these errors

If the cache is able to invalidate the indicated stored responses in a reasonable amount of time (for example, 30 seconds), the invalidation resource SHOULD respond with a 200 (OK) status code only once all of those responses have been invalidated.

Otherwise (i.e., the cache cannot invalidate within a reasonable amount of time, or cannot estimate how long invalidation will take), it SHOULD immediately respond with a 202 (Accepted) status code.

This specification does not define a format for successful responses from invalidation resources; implementations MAY send responses with empty content. Future extensions might allow description of the results of invalidation.

3. HTTP Cache Invalidation Event Format

The HTTP Cache Invalidation Event Format (hereafter, 'event format') is a JSON-based [JSON] format that conveys a list of selectors that are used to identify the stored responses in a cache, along with additional instructions about the nature of invalidation being requested.

Its content is an object with the following two required members:

For example, this document contains an event using the "URI" selector type, and invalidates two URIs:

{
    "type": "uri",
    "selectors": [
      "https://example.com/foo/bar",
      "https://example.com/foo/bar/baz"
    ]
}

Additionally, this document defines one optional member of the top-level object:

Support for purge is OPTIONAL. When a cache supports for purge, the cache MUST remove the relevant response(s) from volatile and non-volatile storage as promptly as possible, and if the cache indicates success with a 200 (OK) status code, MUST do so before returning the response.

Unrecognised members of the top-level object MUST be ignored, to allow future updates of this specification to add new features.

3.1. Selector Types

This document defines the following cache invalidation selector types:

3.1.1. URI Selectors

The "uri" selector type selects one or more stored responses by their URI. When the invalidation event type is "uri", the content each selector string MUST be either a URI [URI] or an IRI [IRI].

When a selector value is compared to a stored response URI to determine whether it selects that response, the following process is used:

  1. If the selector value is a IRI, it is converted to a URI, per Section 3.2 of [IRI].
  2. Syntax-based normalization is applied to both the selector and stored response URI, per Section 6.2.2 of [URI].
  3. Scheme-based normalization is applied to both the selector and stored response URI, per Section 6.2.3 of [URI].

For example, "https://www.example.com/foo/bar" selects stored responses with the following URIs:

  • "https://www.example.com/foo/bar"
  • "HTTPS://www.example.com:443/foo/bar"
  • "https://www.example.com/fo%6f/bar"
  • "https://www.example.com/fo%6F/bar"
  • "https://www.example.com/../foo/bar"
  • "https://www.example.com:/foo/bar"

... but does not select stored responses with the following URIs:

  • "https://www.example.com/FOO/bar" (different path)
  • "https://www.example.com/foo/bar/baz" (different path)
  • "https://www.example.com/foo/barbaz" (different path)
  • "https://www.example.com/foo/bar/" (different path)
  • "http://www.example.com/foo/bar" (different scheme)
  • "https://example.com/foo/bar" (different authority)
  • "https://www.example.com/foo/bar?baz" (different query)
  • "https://www.example.com/foo/bar?" (different query)
  • "https://www.example.com:8080/foo/bar" (different authority)

3.1.2. URI Prefix Selectors

The "uri-prefix" selector type selects one or more stored responses by their URI prefix. When the invalidation event type is "uri-prefix", the content each selector string MUST be either a URI [URI] or an IRI [IRI].

When a selector value is compared to a stored response URI to determine whether it selects that response, the same normalization process described in Section 3.1.1 is used. However, the selector value is considered to be a prefix to match. Additionally, each segment of the selector value's path must have a matching segment in the stored response URI.

For example, "https://www.example.com/foo/bar" would select all of the following URIs:

  • "https://www.example.com/foo/bar"
  • "https://www.example.com/foo/bar/"
  • "https://www.example.com/foo/bar/baz"
  • "https://www.example.com/foo/bar/baz/bat"
  • "https://www.example.com/foo/bar?"
  • "https://www.example.com/foo/bar?baz"

... but does not match stored responses with the following URIs:

  • "https://www.example.com/foo/barbaz" (last segment does not match) ww.example.com/foo/BAR/baz" (second segment does not match)

3.1.3. Origin Selectors

The "origin" selector type selects all stored responses associated with a URI origin (Section 4.3.1 of [HTTP]). When the invalidation event type is "origin", the content of each selector string MUST be a normalized (using the process defined in Section 3.1.1) URI prefix, without a trailing "/". If the port is not present, it is assumed to be the default port for the scheme.

For example, all of these are origin selectors:

  • "https://www.example.com:443"
  • "http://example.com"
  • "https://example.net:8080"

3.1.4. Group Selectors

The "group" selector type selects all stored responses associated with a group on a specified origin. When the invalidation event type is "group", the content of each selector string MUST be a normalized (using the process defined in Section 3.1.1) URI prefix with port always present, and without a trailing "/". See Section 3.1.3 for examples.

Additionally, when the invalidation event type is "group", the document's root object MUST contain an additional member, "groups", whose value is an array of strings that correspond to the group(s) being invalidated, per [GROUPS].

For example:

{
    "type": "group",
    "selectors": [
      "https://example.com:443",
      "https://www.example.com:443"
    ],
    "groups": [
      "scripts"
    ]
}

4. IANA Considerations

5. Security Considerations

TBD

6. Normative References

[DESCRIPTION]
"*** BROKEN REFERENCE ***".
[GROUPS]
Nottingham, M., "HTTP Cache Groups", Work in Progress, Internet-Draft, draft-nottingham-http-cache-groups-00, , <https://datatracker.ietf.org/doc/html/draft-nottingham-http-cache-groups-00>.
[HTTP]
Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, , <https://www.rfc-editor.org/rfc/rfc9110>.
[HTTP-CACHING]
Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Caching", STD 98, RFC 9111, DOI 10.17487/RFC9111, , <https://www.rfc-editor.org/rfc/rfc9111>.
[IRI]
Duerst, M. and M. Suignard, "Internationalized Resource Identifiers (IRIs)", RFC 3987, DOI 10.17487/RFC3987, , <https://www.rfc-editor.org/rfc/rfc3987>.
[JSON]
Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, , <https://www.rfc-editor.org/rfc/rfc8259>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[URI]
Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/rfc/rfc3986>.

Appendix A. Acknowledgements

Thanks to Stephen Ludin for his review and suggestions.

Author's Address

Mark Nottingham
Prahran
Australia