More Instant Messaging Interoperability (MIMI) message content

3.1. Naming schemes

IM systems have a number of types of identifiers. These are described in detail in [I-D.mahy-mimi-identity]. A few of these used in this document are:¶

• handle identifier (external, friendly representation). This is the type of identifier described later as the senderUserUrl in the examples, which is analogous to the From header in email.¶
• client/device identifier (internal representation). This is the type of identifier described as the senderClientUrl in the examples.¶
• group or room or conversation or channel name (either internal or external representation). This is the type of identifier described as the MLS group URL in the examples.¶

This proposal relies on URIs for naming and identifiers. All the example use the im: URI scheme (defined in [RFC3862]), but any instant messaging scheme could be used.¶

3.2. Message Container

Most common instant messaging features are expressed as individual messages. A plain or rich text message is obviously a message, but a reaction (ex: like), a reply, editing a previous message, deleting an earlier message, and read receipts are all typically modeled as another message with different properties.¶

This document describes the semantics of a message container, which contains a message ID and timestamp and represents most of these previously mentioned messages. The container typically carries one or more body parts with the actual message content (for example, an emoji used in a reaction, a plain text or rich text message or reply, a link, or an inline image).¶

3.3. Message Status Report

This document also describes the semantics of a status report of other messages. The status report has a timestamp, but does not have a message ID of its own. Because some messaging systems deliver messages in batches and allow a user to mark several messages read at a time, the report format allows a single report to convey the read/delivered status of multiple messages (by message ID) within the same MLS group at a time.¶

4.1. Required Fields

Every MIMI content message has a message ID {1}. The message ID has a local part and a domain part. The domain part corresponds to the domain of the sender of the message. The local part must be unique among all messages sent in the domain. Using a UUID for the local part is RECOMMENDED.¶

struct MessageId {
    Octets localPart;
    String domain;
};

struct MimiContent {
    MessageId messageId;     // required value {1}
    uint64 timestamp;        // milliseconds since 01-Jan-1970 {2}
    MessageId replaces;      // {3}
    Octets topicId;          // {4}
    uint32 expires;          // 0 = does not expire {5}
    ReplyToInfo inReplyTo;   // {6}
    NestablePart body;       // {7}
};

Every MIMI content message has a timestamp {2} when the message was encrypted. It is represented as the whole number of milliseconds since the start of the UNIX epoch (01-Jan-1970 00:00:00 UTC).¶

4.2. Message Behavior Fields

The replaces {3} data field indicates that the current message is a replacement or update to a previous message whose message ID is in the replaces data field. It is used to edit previously-sent messages, delete previously-sent messages, and adjust reactions to messages to which the client previously reacted. If the replaces field is empty (i.e. both the message ID localPart and the domain are zero length), the receiver assumes that the current message has not identified any special relationship with another previous message.¶

The topicId {4} data field indicates that the current message is part of a logical grouping of messages which all share the same value in the topicId data field. If the topicId is zero length, there is no such grouping.¶

The expires {5} data field is a hint from the sender to the receiver that the message should be locally deleted and disregarded at a specific timestamp in the future. Indicate a message with no specific expiration time with the value zero. The data field is an unsigned integer number of seconds after the start of the UNIX epoch. Using an 32-bit unsigned integer allows expiration dates until the year 2106. Note that specifying an expiration time provides no assurance that the client actually honors or can honor the expiration time, nor that the end user didn't otherwise save the expiring message (ex: via a screenshot).¶

The inReplyTo {6} data field indicates that the current message is a related continuation of another message sent in the same MLS group. It contains the message ID of the referenced message and the SHA-256 hash [RFC6234] of its MimiContent structure. If the message field is empty (i.e. both the message ID localPart and the domain are zero length), the receiver assumes that the current message has not identified any special relationship with another previous message; in that case the hash-alg is none and the replyToHash is zero length.¶

The inReplyTo hash is a message digest used to make sure that a MIMI message cannot refer to a sequence of referred messages which refers back to itself. When replying a client checks if the referenced message is itself a Reply. It compares the hash¶

When receiving a message, the client verifies that the hash is correct. Next it checks if the referenced message is itself a Reply. If so, it continues following the referenced messages, checking that neither the messageId nor the hash of any of referenced messages indicates a Reply which "loops" back to a message later in the inReplyTo chain.¶

enum HashAlgorithm {
    none = 0,
    sha256 = 1
};

struct ReplyToInfo {
    MessageId message;
    HashAlgorithm hash-alg;
    Octets replyToHash;      // empty or hash of body.content
};

Note that a inReplyTo always references a specific message ID. Even if the original message was edited several times, a reply always refers to a specific version of that message, and SHOULD refer to the most current version at the time the reply is sent.¶

4.3. Message Bodies

Every MIMI content message has a body {7} which can have multiple, possibly nested parts. A body with zero parts is permitted when deleting or unliking {8}. When there is a single body, its IANA media type, subtype, and parameters are included in the contentType field {9}.¶

typedef std::monostate NullPart; // {8}

struct SinglePart {
    String contentType;   // An IANA media type {9}
    Octets content;       // The actual content
};

typedef std::vector<NestablePart> MultiParts;

enum PartSemantics { // {10}
    nullPart = 0,
    singlePart = 1, // the bodyParts is a single part
    chooseOne = 2,  // receiver picks exactly one part to process
    singleUnit = 3  // receiver processes all parts as single unit
    processAll = 4  // receiver processes all parts individually
};

enum Disposition {
    unspecified = 0,
    render = 1,
    reaction = 2,
    profile = 3,
    inline = 4,
    icon = 5,
    attachment = 6,
    session = 7,
    preview = 8
};

struct NestablePart {
    Disposition disposition;  // {11}
    String language;          // {12}
    uint16 partIndex;         // {13}
    PartSemantics partSemantics;
    std::variant<NullPart, SinglePart, MultiParts> part;
};

With some types of message content, there are multiple media types associated with the same message which need to be rendered together, for example a rich-text message with an inline image. With other messages, there are multiple choices available for the same content, for example a choice among multiple languages, or between two different image formats. The relationship semantics among the parts is specified as an enumeration {10}.¶

The nullPart part semantic is used when there is no body part--for deleting and unliking. The singlePart part semantic is used when there is a single body part.¶

The chooseOne part semantic is roughly analogous to the semantics of the multipart/alternative media type, except that the ordering of the nested body parts is merely a preference of the sender. The receiver can choose the body part among those provided according to its own policy.¶

The singleUnit part semantic is roughly analogous to the semantics of the multipart/related media type, in that all the nested body parts at this level are part of a single entity (for example, a rich text message with an inline image). If the receiver does not understand even one of the nested parts at this level, the receiver should not process any of them.¶

The processAll part semantic is roughly analogous to the semantics of the multipart/mixed media type. The receiver should process as many of the nested parts at this level as possible. For example, a rich text document with a link, and a preview image of the link target could be expressed using this semantic. Processing the preview image is not strictly necessary for the correct rendering of the rich text part.¶

The disposition {11} and language {12} of each part can be specified for any part, including for nested parts. The disposition represents the intended semantics of the body part or a set of nested parts. It is inspired by the values in the Content-Disposition MIME header [RFC2183]. The render and inline dispositions mean that the content should be rendered "inline" directly in the chat interface. In the MIMI context the two dispositions are equivalent. The attachment disposition means that the content is intended to be downloaded by the receiver instead of being rendered immediately. The reaction disposition means that the content is a single reaction to another message, typically an emoji, but which could be an image, sound, or video. The reaction disposition was originally published in [RFC9078], but was incorrectly placed in the Content Disposition Parameters IANA registry instead of in the Content Disposition Values registry. The session disposition means that the content is a description of a multimedia session, or a URI used to join one. The preview disposition means that the content is a sender-generated preview of something, such as the contents of a link. The value of the language data field is an empty string or a comma-separated list of one or more Language-tags as defined in [RFC2382].¶

Each part also has an part index {13}, which is a zero-indexed, depth-first integer. It is used to efficiently refer to a specific body part (for example, an inline image) within another part. See {Nested body examples} for an example of how the part index is calculated.¶

4.4. Derived Data Values

In addition to fields which are contained in a MIMI content message, there are also two fields which the implementation can definitely derive (the MLS group ID {14}, and the leaf index of the sender {15}). Many implementations could also determine one or more of: the senders client identifier URL {16}, the user identifier URL of the credential associated with the sender {17}, and the identifier URL for the MLS group {18}.¶

struct MessageDerivedValues {
    Octets mlsGroupId;       // value always available {14}
    uint32 senderLeafIndex;  // value always available {15}
    ImUrl senderClientUrl;   // {16}
    ImUrl senderUserUrl;     // "From" {17}
    ImUrl mlsGroupUrl;       // "To" {18}
};

5.1. Original Message

In this example, Alice Smith sends a rich-text (Markdown) [RFC7763] message to the Engineering Team MLS group. The following values are derived from the client:¶

• Sender leaf index: 4¶
• Sender client ID URL: im:3b52249d-68f9-45ce-8bf5-c799f3cad7ec/0003@example.com¶
• Sender user handle URL: im:%40alice-smith@example.com¶
• MLS group ID: 7u4NEqe1tbeBFa0aHdsTgRyD/XOHxD5meZpZS+7aJr8=¶
• The MLS group URL: im:#engineering_team@example.com¶
• The MLS group name: "Engineering Team"¶

Below are the relevant data fields set by the sender:¶

messageId = "28fd19857ad7@example.com";
timestamp = 1644387225019;  // 2022-02-08T22:13:45-00:00
expires = 0;
body.partIndex = 0;
body.contentType = "text/markdown;charset=utf-8";
body.content = "Hi everyone, we just shipped release 2.0." +
               " __Good work__!";

5.2. Reply

A reply message looks similar, but contains the message ID of the original message in the inReplyTo data field. The derived MLS group ID, URL, and name do not change in this example. The derived senderClientId and senderLeafIndex are not especially relevant so all but the user handle URL will be omitted.¶

• Sender user handle URL: im:%40bob-jones@example.com¶

The data fields needed:¶

messageId = "e701beee59f9@example.com";
timestamp = 1644387237492;   // 2022-02-08T22:13:57-00:00
inReplyTo.message: "28fd19857ad7@example.com";
inReplyTo.hash-alg: sha256;
inReplyTo.replyToHash: "\xd3c14744d1791d02548232c23d35efa9" +
                       "\x7668174ba385af066011e43bd7e51501";
expires = 0;
body.partIndex = 0;
body.contentType = "text/markdown;charset=utf-8";
body.content = "Right on! _Congratulations_ 'all!";

5.3. Reaction

A reaction looks like a reply, but uses the Disposition token of reaction. It is modeled on the reaction Content-Disposition token defined in [RFC9078]. Both indicate that the intended disposition of the contents of the message is a reaction.¶

The content in the sample message is a single Unicode heart character (U+2665). Discovering the range of characters each implementation could render as a reaction can occur out-of-band and is not within the scope of this proposal. However, an implementation which receives a reaction character string it does not recognize could render the reaction as a reply, possibly prefixing with a localized string such as "Reaction: ". Note that a reaction could theoretically even be another media type (ex: image, audio, or video), although not currently implemented in major instant messaging systems. Note that many systems allow mutiple independent reactions per sender.¶

• Sender user handle URL: im:cathy-washington@example.com¶

messageId = "1a771ca1d84f@example.com";
timestamp = 1644387237728;   // 2022-02-08T22:13:57-00:00
inReplyTo.message: "28fd19857ad7@example.com";
inReplyTo.hash-alg: sha256;
inReplyTo.replyToHash: "\xd3c14744d1791d02548232c23d35efa9" +
                       "\x7668174ba385af066011e43bd7e51501";
expires = 0;
body.disposition = reaction;
body.partIndex = 0;
body.contentType = "text/plain;charset=utf-8";
body.content = "\u2665"; \\ ♥

5.4. Mentions

In instant messaging systems and social media, a mention allows special formatting and behavior when a name, handle, or tag associated with a known group is encountered, often when prefixed with a commercial-at "@" character for mentions of users or a hash "#" character for groups or tags. A message which contains a mention may trigger distinct notifications on the IM client.¶

We can convey a mention by linking the user handle URI, or group URI in Markdown or HTML rich content. For example, a mention using Markdown is indicated below.¶

• Sender user handle URL: im:cathy-washington@example.com¶

messageId = "4dcab7711a77@example.com";
timestamp = 1644387243008;   // 2022-02-08T22:14:03-00:00
expires = 0;
body.partIndex = 0;
body.contentType = "text/markdown;charset=utf-8";
body.content = "Kudos to [@Alice Smith](im:alice-smith@example.com)"
             + "for making the release happen!";

The same mention using HTML [W3C.CR-html52-20170808] is indicated below.¶

body.contentType = "text/html;charset=utf-8";
body.content = "<p>Kudos to <a href='im:alice-smith@example.com'>" +
               "@Alice Smith</a> for making the release happen!</p>"

5.5. Edit

Unlike with email messages, it is common in IM systems to allow the sender of a message to edit or delete the message after the fact. Typically the message is replaced in the user interface of the receivers (even after the original message is read) but shows a visual indication that it has been edited.¶

The replaces data field includes the message ID of the message to edit/replace. The message included in the body is a replacement for the message with the replaced message ID.¶

Here Bob Jones corrects a typo in his original message:¶

• Sender user handle URL: im:%40bob-jones@example.com¶

messageId = "89d3472622a4@example.com";
timestamp = 1644387248621;   // 2022-02-08T22:14:08-00:00
replaces: "e701beee59f9@example.com";
expires = 0;
body.partIndex = 0;
body.contentType = "text/markdown;charset=utf-8";
body.content = "Right on! _Congratulations_ y'all!";

5.6. Delete

In IM systems, a delete means that the author of a specific message has retracted the message, regardless if other users have read the message or not. Typically a placeholder remains in the user interface showing that a message was deleted. Replies which reference a deleted message typically hide the quoted portion and reflect that the original message was deleted.¶

If Bob deleted his message instead of modifying it, we would represent it using the replaces data field, and using an empty body (NullPart), as shown below.¶

messageId = "89d3472622a4@example.com";
timestamp = 1644387248621;   // 2022-02-08T22:14:08-00:00
replaces: "e701beee59f9@example.com";
expires = 0;
body.partSemantics = nullPart;
body.part = NullPart;

5.7. Unlike

In most IM systems, not only is it possible to react to a message ("Like"), but it is possible to remove a previous reaction ("Unlike"). This can be accomplished by deleting the message which creates the original reaction¶

If Cathy removes her reaction, we would represent the removal using a replaces data field with an empty body, referring to the message which created the reaction, as shown below.¶

• Sender user handle URL: im:cathy-washington@example.com¶

messageId = "d052cace46f8@example.com";
timestamp = 1644387250389;   // 2022-02-08T22:14:10-00:00
replaces: "1a771ca1d84f@example.com";
expires = 0;
body.disposition = reaction;
body.partIndex = 0;
body.partSemantics = nullPart;
body.part = NullPart;

5.8. Expiring

Expiring messages are designed to be deleted automatically by the receiving client at a certain time whether they have been read or not. As with manually deleted messages, there is no guarantee that an uncooperative client or a determined user will not save the content of the message, however most clients respect the convention.¶

The expires data field contains the timestamp when the message can be deleted. The semantics of the header are that the message is automatically deleted by the receiving clients at the indicated time without user interaction or network connectivity necessary.¶

• Sender user handle URL: im:alice-smith@example.com¶

messageId = "5c95a4dfddab@example.com";
timestamp = 1644389403227;   // 2022-02-08T22:49:06-00:00
expires = 1644390004;         // ~10 minutes later
body.partIndex = 0;
body.contentType = "text/markdown;charset=utf-8";
body.content = "__*VPN GOING DOWN*__\n" +
    "I'm rebooting the VPN in ten minutes unless anyone objects."

5.9. Attachments

The message/external-body MIME Type is a convenient way to present a URL to download an attachment which should not be rendered inline. The disposition data field is set to attachment.¶

body.disposition = attachment;
body.contentType = "message/external-body; access-type=URL;" +
  "URL=\"https://example.com/storage/bigfile.m4v\";" +
  "size=708234961;hash=10AB568E91245681AC1B";

5.10. Conferencing

Joining a conference via URL is also possible. The link could be rendered to the user, requiring a click. Alternatively the disposition could be specified as session which could be processed differently by the client (for example, alerting the user or presenting a dialog box). Further discussion of calling and conferencing functionality is out-of-scope of this document.¶

body.disposition = session;
body.contentType = "message/external-body; access-type=URL;" +
  "URL=\"https://example.com/join/12345\"";

5.11. Topics / Threading

As popularized by the messaging application Slack, some messaging applications have a notion of a Topic or message Thread (not to be confused with message threading as used in email). Clients beginning a new "topic" populate the topicId with a unique opaque octet string. This could be the message ID of the first message sent related to the topic. Subsequent messages may include the same topicId for those messages to be associated with the same topic. The sort order for messages within a thread uses the timestamp field. If more than one message has the same timestamp, the lexically lowest message ID sorts earlier.¶

5.12. Delivery Reporting and Read Receipts

In instant messaging systems, read receipts typically generate a distinct indicator for each message. In some systems, the number of users in a group who have read the message is subtly displayed and the list of users who read the message is available on further inspection.¶

Of course, Internet mail has support for read receipts as well, but the existing message disposition notification mechanism defined for email in [RFC8098] is completely inappropriate in this context:¶

• notifications can be sent by intermediaries¶
• only one notification can be sent about a single message per recipient¶
• a human-readable version of the notification is expected¶
• each notification can refer to only one message¶
• it is extremely verbose¶

Instead we would like to be able to include status changes about multiple messages in each report, the ability to mark a message delivered, then read, then unread, then expired for example.¶

The proposed format below, application/mimi-message-status is sent by one member of an MLS group to the entire group and can refer to multiple messages in that group. The format contains its own timestamp, and a list of message ID / status pairs. As the status at the recipient changes, the status can be updated in a subsequent notification.¶

enum MessageStatus {
    unread = 0,
    delivered = 1,
    read = 2,
    expired = 3,
    deleted = 4,
    hidden = 5,
    error = 6
};

struct PerMessageStatus {
    MessageId messageId;
    MessageStatus status;
};

struct MessageStatusReport {
    unit64 timestamp;
    // a vector of message statuses in the same MLS group
    std::vector<PerMessageStatus> statuses;
};

• Sender user handle URL: im:bob-jones@example.com¶

timestamp = 1644284703227;
statuses[0].messageId = "4dcab7711a77@example.com";
statuses[0].status = read;
statuses[1].messageId = "285f75c46430@example.com";
statuses[1].status = read;
statuses[2].messageId = "c5e0cd6140e6@example.com";
statuses[2].status = unread;
statuses[3].messageId = "5c95a4dfddab@example.com";
statuses[3].status = expired;

6.1. MIMI Required and Recommended media types

As the MIMI Content container is just a container, the plain text or rich text messages sent inside, and any image or other formats needs to be specified. Clients compliant with MIMI MUST be able to receive the following media types:¶

• application/mimi-content -- the MIMI Content container format (described in this document)¶
• text/plain;charset=utf-8¶
• text/markdown;variant=GFM -- Github Flavored Markdown [GFM])¶
• message/external-body -- [RFC4483]¶

Note that it is acceptable to render the contents of a received markdown document as plain text.¶

The following MIME types are RECOMMENDED:¶

• text/markdown;variant=CommonMark -- CommonMark¶
• text/html¶
• application/mimi-message-status -- (described in this document)¶
• image/jpeg¶
• image/png¶

6.2. Use of proprietary media types

As most messaging systems are proprietary, standalone systems, it is useful to allow clients to send and receive proprietary formats among themselves. Using the functionality in the MIMI Content container, clients can send a message using the basic functionality described in this document AND a proprietary format for same-vendor clients simultaneously over the same group with end-to-end encryption. An example is given in the Appendix.¶

7.1. MIME subtype registration of application/mimi-content

This document proposes registration of a media subtype with IANA.¶

Type name: application

Subtype name: mimi-content

Required parameters: none

Optional parameters: none

Encoding considerations:
   This message type should be encoded as binary data

Security considerations:
   See Section A of RFC XXXX

Interoperability considerations:
   See Section Y.Z of RFC XXXX

Published specification: RFC XXXX

Applications that use this media type:
   Instant Messaging Applications

Fragment identifier considerations: N/A

Additional information:

   Deprecated alias names for this type: N/A
   Magic number(s): N/A
   File extension(s): N/A
   Macintosh file type code(s): N/A

Person & email address to contact for further information:
   IETF MIMI Working Group mimi@ietf.org

7.2. MIME subtype registration of application/mimi-message-status

This document proposes registration of a media subtype with IANA.¶

Type name: application

Subtype name: mimi-message-status

Required parameters: none

Optional parameters: none

Encoding considerations:
   This message type should be encoded as binary data

Security considerations:
   See Section A of RFC XXXX

Interoperability considerations:
   See Section Y.Z of RFC XXXX

Published specification: RFC XXXX

Applications that use this media type:
   Instant Messaging Applications

Fragment identifier considerations: N/A

Additional information:

   Deprecated alias names for this type: N/A
   Magic number(s): N/A
   File extension(s): N/A
   Macintosh file type code(s): N/A

Person & email address to contact for further information:
   IETF MIMI Working Group mimi@ietf.org

8.1. General handling

The following cases are examples of nonsensical values that most likely represent malicious messages. These should be logged and discarded.¶

• sender of the message¶

  • where the apparent sender is not a member of the target MLS group¶

• message IDs¶

  • which are very long (greater than 4096 octets)¶
  • where the sender domain and the messageId domain are different¶
  • where the messageId in this format is expected to match a similar field in the enclosing transfer protocol, but does not¶

• timestamps¶

  • received more than a few minutes in the future, or¶
  • before the first concrete syntax of this document is published¶

• inReplyTo¶

  • inReplyTo.hash-alg is none even when the inReplyTo.message is present¶
  • inReplyTo.hash-alg is an unknown value¶
  • the length of inReplyTo.replyToHash does not correspond to the algorithm specified in inReplyTo.hash-alg¶

• topicId¶

  • the topicId is very long (greater than 4096 octets)¶
  • a topic is specified, but an inReplyTo or replaces field refers to a message outside of the topic¶

• expires¶

  • refers to a date more than a year in the past¶
  • refers to a date more than a year in the future¶

• body¶

  • has too many body parts (more than 1024)¶
  • is nested too deeply (more than 4 levels deep)¶
  • is too large (according to local policy)¶
  • has an unknown PartSemantics value¶
  • contains partIndex values which are not continuous from zero¶

For the avoidance of doubt, the following cases may be examples of legitimate use cases, and should not be considered the result of a malicious sender.¶

• message IDs¶

  • where inReplyTo.message or replaces refer to an unknown message. Such a message could have been sent before the local client joined.¶

• body¶

  • where a body part contains an unrecognized Disposition value. The unknown value should be treated as if it where render.¶
  • where a contentType is unrecognized or unsupported.¶
  • where a language tag is unrecognized or unsupported.¶

8.2. Alternate content rendering

This document includes a mechanism where the sender can offer alternate versions of content in a single message. For example, the sender could send:¶

• an plain text and an HTML version of a text message¶
• a thumbnail preview and link to a high-resolution image or video¶
• versions of the same message in multiple languages¶
• an PNG image and a scalable vector graphics version of a line drawing¶

A malicious client could use this mechanism to send content that will appear different to a subset of the members of a group and possibly elicit an incorrect or misleading response.¶

Message as seen by Alice (manager)
Xavier: Do you want me to reserve a room for the review meeting?

Message as seen by Bob (Alice's assistant)
Xavier: @Bob I need to pickup Alice's Ferarri keys. She'll confirm

Reply sent by Alice
Alice: Yes please.

8.3. Link and Mention handling

Both Markdown and HTML support links. Using the example of an HTTP link, if the rendered text and the link target match exactly or are canonically equivalent, there is no need for confirmation if the end user selects the link.¶

[example.com/foobar](https://example.com/foobar)
[https://example.com/foobar](https://example.com/foobar)
[https://example.com:443/foobar](https://example.com/foobar)

However, if the link text is different, the user should be presented with an alert warning that the text is not the same.¶

[https://example.com/foobar](https://spearphishers.example/foobar)

Likewise, for a Mention, if the link text exactly matches the IM URI, or exactly matches the canonical handle for that URI, the IM application can render the link as a Mention. In some clients, this may result in a different notification policy.¶

[im:alice-smith@example.com](im:alice-smith@example.com)
[@AliceSmith](im:alice-smith@example.com)

Otherwise, the application, should render the text as any other link that requires an alert warning.¶

8.4. Delivery and Read Receipts

Delivery and Read Receipts can provide useful information inside a group, or they can reveal sensitive private information. In many IM systems there is are per-group policies for and/or delivery read receipts:¶

• they are required¶
• they are permitted, but optional¶
• they are forbidden¶

In the first case, everyone in the group would have to claim to support read receipts to be in the group and agree to the policy of sending them whenever a message was read. A user who did not wish to send read receipts could review the policy (automatically or manually) and choose not to join the group. Of course, requiring read receipts is a cooperative effort just like using self-deleting messages. A malicious client could obviously read a message and not send a read receipt, or send a read receipt for a message that was never rendered. However, cooperating clients have a way to agree that they will send read receipts when a message is read in a specific group.¶

In the second case, sending a read receipt would be at the discretion of each receiver of the message (via local preferences).¶

A.1. Proprietary and Common formats sent as alternatives

Example of body needed to send this profile and a proprietary messaging protocol simultaneously.¶

body = new NestablePart();
body.disposition = render;
body.language = "";
body.partIndex = 0;
body.partSemantics = chooseOne;

s = new SinglePart();
s.contentType = "application/mimi-content";
s.content = "\xabcdef0123456789....";

standardPart = new NestablePart()
standardPart.disposition = render;
standardPart.language = "";
standardPart.partIndex = 1;
standardPart.partSemantics = singlePart;
standardPart.part = s;

p = new SinglePart();
p.contentType =
  "application/vnd.examplevendor-fancy-im-message";
p.content = "\x0123456789abcdef....";

proprietaryPart = new NestablePart()
proprietaryPart.disposition = render;
proprietaryPart.language = "";
proprietaryPart.partIndex = 2;
proprietaryPart.partSemantics = singlePart;
proprietaryPart.part = p;

body.part = new MultiParts();
body.part.push(standardPart);
body.part.push(proprietaryPart);

A.2. Mulitple Reactions Example

This shows sending a reaction with multiple separate emojis.¶

TBC¶

A.3. Complicated Nested Example

This example shows separate English and French versions of HTML message with inline images. Each of the images is presented in alternate formats: an animated GIF, and a single PNG.¶

TBC¶

A.4. TLS Presentation Language multipart container format

In a heterogenous group of IM clients, it is often desirable to send more than one media type as alternatives, such that IM clients have a choice of which media type to render. For example, imagine an IM group containing a set of clients which support a common video format and a subset which only support animated GIFs. The sender could use a MultiParts NestablePart with chooseOne semantics containing both media types. Every client in the group chat could render something resembling the media sent. This is analogous to the multipart/alternative [RFC2046] media type.¶

Likewise it is often desirable to send more than one media type intended to be rendered together as in (for example a rich text document with embedded images), which can be represented using a MultiParts NestablePart with processAll semantics. This is analogous to the multipart/mixed [RFC2046] media type.¶

Some implementors complain that the multipart types are unnatural to use inside a binary protocol which requires explicit lengths such as MLS [I-D.ietf-mls-protocol]. Concretely, an implementation has to scan through the entire content to construct a boundary token which is not contained in the content.¶

Note that there is a minor semantic difference between multipart/alternative and MultiParts with chooseOne semantics. In multipart/alternative, the parts are presented in preference order by the sender. With MultiParts the receiver chooses its "best" format to render according to its own preferences.¶

B.1. Changes between draft-mahy-mimi-content-01 and draft-mahy-mimi-content-02

• made semantics abstract (C++ structs) instead of using CPIM or MIME headers¶

B.2. Changes between draft-mahy-mimi-content-02 and draft-ietf-mimi-content-00

• replaced threadId with topicId¶
• inReplyTo now has a hash of the referenced message¶
• clarified that replies are always to a specific version of a modified message¶
• changed timestamp to a whole number of milliseconds since the epoch to avoid confusion¶
• added Security Considerations section¶
• added IANA Considerations section¶
• added change log¶