From: David Howells <dhowells@redhat.com>
The attached patches provides part 8 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/arch/frv/mb93090-mb00/Makefile | 5
25-akpm/arch/frv/mb93090-mb00/pci-dma.c | 124 ++++++++
25-akpm/arch/frv/mb93090-mb00/pci-frv.c | 363 +++++++++++++++++++++++++
25-akpm/arch/frv/mb93090-mb00/pci-frv.h | 47 +++
25-akpm/arch/frv/mb93090-mb00/pci-irq.c | 70 ++++
25-akpm/arch/frv/mb93090-mb00/pci-vdk.c | 462 ++++++++++++++++++++++++++++++++
6 files changed, 1071 insertions(+)
diff -puN /dev/null arch/frv/mb93090-mb00/Makefile
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/Makefile Mon Nov 8 15:00:41 2004
@@ -0,0 +1,5 @@
+#
+# Makefile for the MB93090-MB00 motherboard stuff
+#
+
+obj-$(CONFIG_PCI) := pci-frv.o pci-dma.o pci-irq.o pci-vdk.o
diff -puN /dev/null arch/frv/mb93090-mb00/pci-dma.c
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/pci-dma.c Mon Nov 8 15:00:41 2004
@@ -0,0 +1,124 @@
+/*
+ * Dynamic DMA mapping support.
+ *
+ * On i386 there is no hardware dynamic DMA address translation,
+ * so consistent alloc/free are merely page allocation/freeing.
+ * The rest of the dynamic DMA mapping interface is implemented
+ * in asm/pci.h.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_MMU
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+{
+ void *ret;
+
+ ret = consistent_alloc(gfp, size, dma_handle);
+ if (ret)
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ consistent_free(vaddr);
+}
+
+
+#else /* CONFIG_MMU */
+
+#if 1
+#define DMA_SRAM_START dma_coherent_mem_start
+#define DMA_SRAM_END dma_coherent_mem_end
+#else // Use video RAM on Matrox
+#define DMA_SRAM_START 0xe8900000
+#define DMA_SRAM_END 0xe8a00000
+#endif
+
+struct dma_alloc_record {
+ struct list_head list;
+ unsigned long ofs;
+ unsigned long len;
+};
+
+static spinlock_t dma_alloc_lock = SPIN_LOCK_UNLOCKED;
+static LIST_HEAD(dma_alloc_list);
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+{
+ struct dma_alloc_record *new;
+ struct list_head *this = &dma_alloc_list;
+ unsigned long flags;
+ unsigned long start = DMA_SRAM_START;
+ unsigned long end;
+
+ if (!DMA_SRAM_START) {
+ printk("%s called without any DMA area reserved!\n", __func__);
+ return NULL;
+ }
+
+ new = kmalloc(sizeof (*new), GFP_ATOMIC);
+ if (!new)
+ return NULL;
+
+ /* Round up to a reasonable alignment */
+ new->len = (size + 31) & ~31;
+
+ spin_lock_irqsave(&dma_alloc_lock, flags);
+
+ list_for_each (this, &dma_alloc_list) {
+ struct dma_alloc_record *this_r = list_entry(this, struct dma_alloc_record, list);
+ end = this_r->ofs;
+
+ if (end - start >= size)
+ goto gotone;
+
+ start = this_r->ofs + this_r->len;
+ }
+ /* Reached end of list. */
+ end = DMA_SRAM_END;
+ this = &dma_alloc_list;
+
+ if (end - start >= size) {
+ gotone:
+ new->ofs = start;
+ list_add_tail(&new->list, this);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+
+ *dma_handle = start;
+ return (void *)start;
+ }
+
+ kfree(new);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ return NULL;
+}
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ struct dma_alloc_record *rec;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_alloc_lock, flags);
+
+ list_for_each_entry(rec, &dma_alloc_list, list) {
+ if (rec->ofs == dma_handle) {
+ list_del(&rec->list);
+ kfree(rec);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ BUG();
+}
+
+#endif /* CONFIG_MMU */
diff -puN /dev/null arch/frv/mb93090-mb00/pci-frv.c
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/pci-frv.c Mon Nov 8 15:00:41 2004
@@ -0,0 +1,363 @@
+/*
+ * Low-Level PCI Access for FRV machines
+ *
+ * Copyright 1993, 1994 Drew Eckhardt
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * Drew@Colorado.EDU
+ * +1 (303) 786-7975
+ *
+ * Drew's work was sponsored by:
+ * iX Multiuser Multitasking Magazine
+ * Hannover, Germany
+ * hm@ix.de
+ *
+ * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ *
+ *
+ * CHANGELOG :
+ * Jun 17, 1994 : Modified to accommodate the broken pre-PCI BIOS SPECIFICATION
+ * Revision 2.0 present on <thys@dennis.ee.up.ac.za>'s ASUS mainboard.
+ *
+ * Jan 5, 1995 : Modified to probe PCI hardware at boot time by Frederic
+ * Potter, potter@cao-vlsi.ibp.fr
+ *
+ * Jan 10, 1995 : Modified to store the information about configured pci
+ * devices into a list, which can be accessed via /proc/pci by
+ * Curtis Varner, cvarner@cs.ucr.edu
+ *
+ * Jan 12, 1995 : CPU-PCI bridge optimization support by Frederic Potter.
+ * Alpha version. Intel & UMC chipset support only.
+ *
+ * Apr 16, 1995 : Source merge with the DEC Alpha PCI support. Most of the code
+ * moved to drivers/pci/pci.c.
+ *
+ * Dec 7, 1996 : Added support for direct configuration access of boards
+ * with Intel compatible access schemes (tsbogend@alpha.franken.de)
+ *
+ * Feb 3, 1997 : Set internal functions to static, save/restore flags
+ * avoid dead locks reading broken PCI BIOS, werner@suse.de
+ *
+ * Apr 26, 1997 : Fixed case when there is BIOS32, but not PCI BIOS
+ * (mj@atrey.karlin.mff.cuni.cz)
+ *
+ * May 7, 1997 : Added some missing cli()'s. [mj]
+ *
+ * Jun 20, 1997 : Corrected problems in "conf1" type accesses.
+ * (paubert@iram.es)
+ *
+ * Aug 2, 1997 : Split to PCI BIOS handling and direct PCI access parts
+ * and cleaned it up... Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * Feb 6, 1998 : No longer using BIOS to find devices and device classes. [mj]
+ *
+ * May 1, 1998 : Support for peer host bridges. [mj]
+ *
+ * Jun 19, 1998 : Changed to use spinlocks, so that PCI configuration space
+ * can be accessed from interrupts even on SMP systems. [mj]
+ *
+ * August 1998 : Better support for peer host bridges and more paranoid
+ * checks for direct hardware access. Ugh, this file starts to look as
+ * a large gallery of common hardware bug workarounds (watch the comments)
+ * -- the PCI specs themselves are sane, but most implementors should be
+ * hit hard with \hammer scaled \magstep5. [mj]
+ *
+ * Jan 23, 1999 : More improvements to peer host bridge logic. i450NX fixup. [mj]
+ *
+ * Feb 8, 1999 : Added UM8886BF I/O address fixup. [mj]
+ *
+ * August 1999 : New resource management and configuration access stuff. [mj]
+ *
+ * Sep 19, 1999 : Use PCI IRQ routing tables for detection of peer host bridges.
+ * Based on ideas by Chris Frantz and David Hinds. [mj]
+ *
+ * Sep 28, 1999 : Handle unreported/unassigned IRQs. Thanks to Shuu Yamaguchi
+ * for a lot of patience during testing. [mj]
+ *
+ * Oct 8, 1999 : Split to pci-i386.c, pci-pc.c and pci-visws.c. [mj]
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+
+#include "pci-frv.h"
+
+#if 0
+void
+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
+ struct resource *res, int resource)
+{
+ u32 new, check;
+ int reg;
+
+ new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
+ if (resource < 6) {
+ reg = PCI_BASE_ADDRESS_0 + 4*resource;
+ } else if (resource == PCI_ROM_RESOURCE) {
+ res->flags |= PCI_ROM_ADDRESS_ENABLE;
+ new |= PCI_ROM_ADDRESS_ENABLE;
+ reg = dev->rom_base_reg;
+ } else {
+ /* Somebody might have asked allocation of a non-standard resource */
+ return;
+ }
+
+ pci_write_config_dword(dev, reg, new);
+ pci_read_config_dword(dev, reg, &check);
+ if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+ printk(KERN_ERR "PCI: Error while updating region "
+ "%s/%d (%08x != %08x)\n", dev->slot_name, resource,
+ new, check);
+ }
+}
+#endif
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void
+pcibios_align_resource(void *data, struct resource *res,
+ unsigned long size, unsigned long align)
+{
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct list_head *ln;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r, *pr;
+
+ /* Depth-First Search on bus tree */
+ for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
+ bus = pci_bus_b(ln);
+ if ((dev = bus->self)) {
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->start)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0)
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, dev->slot_name);
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r, *pr;
+
+ while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
+ dev != NULL
+ ) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for(idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned at all */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
+ r->start, r->end, r->flags, disabled, pass);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & PCI_ROM_ADDRESS_ENABLE) {
+ /* Turn the ROM off, leave the resource region, but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+ r->flags &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_read_config_dword(dev, dev->rom_base_reg, ®);
+ pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static void __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ int idx;
+ struct resource *r;
+
+ while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
+ dev != NULL
+ ) {
+ int class = dev->class >> 8;
+
+ /* Don't touch classless devices and host bridges */
+ if (!class || class == PCI_CLASS_BRIDGE_HOST)
+ continue;
+
+ for(idx=0; idx<6; idx++) {
+ r = &dev->resource[idx];
+
+ /*
+ * Don't touch IDE controllers and I/O ports of video cards!
+ */
+ if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
+ (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
+ continue;
+
+ /*
+ * We shall assign a new address to this resource, either because
+ * the BIOS forgot to do so or because we have decided the old
+ * address was unusable for some reason.
+ */
+ if (!r->start && r->end)
+ pci_assign_resource(dev, idx);
+ }
+
+ if (pci_probe & PCI_ASSIGN_ROMS) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ r->end -= r->start;
+ r->start = 0;
+ if (r->end)
+ pci_assign_resource(dev, PCI_ROM_RESOURCE);
+ }
+ }
+}
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+ pcibios_assign_resources();
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for(idx=0; idx<6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
diff -puN /dev/null arch/frv/mb93090-mb00/pci-frv.h
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/pci-frv.h Mon Nov 8 15:00:41 2004
@@ -0,0 +1,47 @@
+/*
+ * Low-Level PCI Access for FRV machines.
+ *
+ * (c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#include <asm/sections.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 0x0001
+#define PCI_PROBE_CONF1 0x0002
+#define PCI_PROBE_CONF2 0x0004
+#define PCI_NO_SORT 0x0100
+#define PCI_BIOS_SORT 0x0200
+#define PCI_NO_CHECKS 0x0400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+#define PCI_ASSIGN_ALL_BUSSES 0x4000
+
+extern unsigned int __nongpreldata pci_probe;
+
+/* pci-frv.c */
+
+extern unsigned int pcibios_max_latency;
+
+void pcibios_resource_survey(void);
+int pcibios_enable_resources(struct pci_dev *, int);
+
+/* pci-vdk.c */
+
+extern int __nongpreldata pcibios_last_bus;
+extern struct pci_bus *__nongpreldata pci_root_bus;
+extern struct pci_ops *__nongpreldata pci_root_ops;
+
+/* pci-irq.c */
+extern unsigned int pcibios_irq_mask;
+
+void pcibios_irq_init(void);
+void pcibios_fixup_irqs(void);
+void pcibios_enable_irq(struct pci_dev *dev);
diff -puN /dev/null arch/frv/mb93090-mb00/pci-irq.c
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/pci-irq.c Mon Nov 8 15:00:41 2004
@@ -0,0 +1,70 @@
+/* pci-irq.c: PCI IRQ routing on the FRV motherboard
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * derived from: arch/i386/kernel/pci-irq.c: (c) 1999--2000 Martin Mares <mj@suse.cz>
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq-routing.h>
+
+#include "pci-frv.h"
+
+/*
+ * DEVICE DEVNO INT#A INT#B INT#C INT#D
+ * ======= ======= ======= ======= ======= =======
+ * MB86943 0 fpga.10 - - -
+ * RTL8029 16 fpga.12 - - -
+ * SLOT 1 19 fpga.6 fpga.5 fpga.4 fpga.3
+ * SLOT 2 18 fpga.5 fpga.4 fpga.3 fpga.6
+ * SLOT 3 17 fpga.4 fpga.3 fpga.6 fpga.5
+ *
+ */
+
+static const uint8_t __initdata pci_bus0_irq_routing[32][4] = {
+ [0 ] { IRQ_FPGA_MB86943_PCI_INTA },
+ [16] { IRQ_FPGA_RTL8029_INTA },
+ [17] { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB },
+ [18] { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA },
+ [19] { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD },
+};
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ uint8_t line, pin;
+
+ while (dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev),
+ dev != NULL
+ ) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1];
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ }
+}
+
+void __init pcibios_penalize_isa_irq(int irq)
+{
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff -puN /dev/null arch/frv/mb93090-mb00/pci-vdk.c
--- /dev/null Thu Apr 11 07:25:15 2002
+++ 25-akpm/arch/frv/mb93090-mb00/pci-vdk.c Mon Nov 8 15:00:41 2004
@@ -0,0 +1,462 @@
+/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/mb-regs.h>
+#include <asm/mb86943a.h>
+#include "pci-frv.h"
+
+unsigned int __nongpreldata pci_probe = 1;
+
+int __nongpreldata pcibios_last_bus = -1;
+struct pci_bus *__nongpreldata pci_root_bus;
+struct pci_ops *__nongpreldata pci_root_ops;
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, dev, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
+
+#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
+#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
+#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __set_PciCfgDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
+#define __set_PciCfgDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
+#define __set_PciCfgDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+static inline int __query(const struct pci_dev *dev)
+{
+// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
+// return dev->bus->number==1;
+// return dev->bus->number==0 &&
+// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
+ return 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 *val)
+{
+ u32 _value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ _value = __get_PciBridgeDataL(where & ~3);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ _value = __get_PciCfgDataL(where & ~3);
+ }
+
+ switch (size) {
+ case 1:
+ _value = _value >> ((where & 3) * 8);
+ break;
+
+ case 2:
+ _value = _value >> ((where & 2) * 8);
+ break;
+
+ case 4:
+ break;
+
+ default:
+ BUG();
+ }
+
+ *val = _value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 value)
+{
+ switch (size) {
+ case 1:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataB(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataB(where, value);
+ }
+ break;
+
+ case 2:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataW(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataW(where, value);
+ }
+ break;
+
+ case 4:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataL(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataL(where, value);
+ }
+ break;
+
+ default:
+ BUG();
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_direct_frv = {
+ pci_frv_read_config,
+ pci_frv_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ u32 id;
+
+ bus.number = 0;
+
+ if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
+ printk("PCI: VDK Bridge device:vendor: %08x\n", id);
+ if (id == 0x200e10cf)
+ return 1;
+ }
+
+ printk("PCI: VDK Bridge: Sanity check failed\n");
+ return 0;
+}
+
+static struct pci_ops * __init pci_check_direct(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* check if access works */
+ if (pci_sanity_check(&pci_direct_frv)) {
+ local_irq_restore(flags);
+ printk("PCI: Using configuration frv\n");
+// request_mem_region(0xBE040000, 256, "FRV bridge");
+// request_mem_region(0xBFFFFFF4, 12, "PCI frv");
+ return &pci_direct_frv;
+ }
+
+ local_irq_restore(flags);
+ return NULL;
+}
+
+/*
+ * Several buggy motherboards address only 16 devices and mirror
+ * them to next 16 IDs. We try to detect this `feature' on all
+ * primary buses (those containing host bridges as they are
+ * expected to be unique) and remove the ghost devices.
+ */
+
+static void __init pcibios_fixup_ghosts(struct pci_bus *b)
+{
+ struct list_head *ln, *mn;
+ struct pci_dev *d, *e;
+ int mirror = PCI_DEVFN(16,0);
+ int seen_host_bridge = 0;
+ int i;
+
+ for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
+ d = pci_dev_b(ln);
+ if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+ seen_host_bridge++;
+ for (mn=ln->next; mn != &b->devices; mn=mn->next) {
+ e = pci_dev_b(mn);
+ if (e->devfn != d->devfn + mirror ||
+ e->vendor != d->vendor ||
+ e->device != d->device ||
+ e->class != d->class)
+ continue;
+ for(i=0; i<PCI_NUM_RESOURCES; i++)
+ if (e->resource[i].start != d->resource[i].start ||
+ e->resource[i].end != d->resource[i].end ||
+ e->resource[i].flags != d->resource[i].flags)
+ continue;
+ break;
+ }
+ if (mn == &b->devices)
+ return;
+ }
+ if (!seen_host_bridge)
+ return;
+ printk("PCI: Ignoring ghost devices on bus %02x\n", b->number);
+
+ ln = &b->devices;
+ while (ln->next != &b->devices) {
+ d = pci_dev_b(ln->next);
+ if (d->devfn >= mirror) {
+ list_del(&d->global_list);
+ list_del(&d->bus_list);
+ kfree(d);
+ } else
+ ln = ln->next;
+ }
+}
+
+/*
+ * Discover remaining PCI buses in case there are peer host bridges.
+ * We use the number of last PCI bus provided by the PCI BIOS.
+ */
+static void __init pcibios_fixup_peer_bridges(void)
+{
+ struct pci_bus bus;
+ struct pci_dev dev;
+ int n;
+ u16 l;
+
+ if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+ return;
+ printk("PCI: Peer bridge fixup\n");
+ for (n=0; n <= pcibios_last_bus; n++) {
+ if (pci_find_bus(0, n))
+ continue;
+ bus.number = n;
+ bus.ops = pci_root_ops;
+ dev.bus = &bus;
+ for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
+ if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
+ l != 0x0000 && l != 0xffff) {
+ printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
+ printk("PCI: Discovered peer bus %02x\n", n);
+ pci_scan_bus(n, pci_root_ops, NULL);
+ break;
+ }
+ }
+}
+
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+static void __init pci_fixup_umc_ide(struct pci_dev *d)
+{
+ /*
+ * UM8886BF IDE controller sets region type bits incorrectly,
+ * therefore they look like memory despite of them being I/O.
+ */
+ int i;
+
+ printk("PCI: Fixing base address flags for device %s\n", d->slot_name);
+ for(i=0; i<4; i++)
+ d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ printk("PCI: IDE base address fixup for %s\n", d->slot_name);
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+
+static void __init pci_fixup_ide_trash(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * There exist PCI IDE controllers which have utter garbage
+ * in first four base registers. Ignore that.
+ */
+ printk("PCI: IDE base address trash cleared for %s\n", d->slot_name);
+ for(i=0; i<4; i++)
+ d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+
+static void __devinit pci_fixup_latency(struct pci_dev *d)
+{
+ /*
+ * SiS 5597 and 5598 chipsets require latency timer set to
+ * at most 32 to avoid lockups.
+ */
+ DBG("PCI: Setting max latency to 32\n");
+ pcibios_max_latency = 32;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+#if 0
+ printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
+#endif
+ pcibios_fixup_ghosts(bus);
+ pci_read_bridge_bases(bus);
+
+ if (bus->number == 0) {
+ struct list_head *ln;
+ struct pci_dev *dev;
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ dev = pci_dev_b(ln);
+ if (dev->devfn == 0) {
+ dev->resource[0].start = 0;
+ dev->resource[0].end = 0;
+ }
+ }
+ }
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+
+int __init pcibios_init(void)
+{
+ struct pci_ops *dir = NULL;
+
+ if (!mb93090_mb00_detected)
+ return -ENXIO;
+
+ __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
+
+ __reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
+ __reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
+
+ *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
+ *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
+
+ __reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9;
+ __reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9;
+ __reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000;
+ __reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000;
+ mb();
+
+ *(volatile unsigned long *)(__region_CS2+0x01300014) == 1;
+
+ ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+ ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+ ioport_resource.end += ioport_resource.start;
+
+ printk("PCI IO window: %08lx-%08lx\n", ioport_resource.start, ioport_resource.end);
+
+ iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+
+ /* Reserve somewhere to write to flush posted writes. */
+ iomem_resource.start += 0x400;
+
+ iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+ iomem_resource.end += iomem_resource.start;
+
+ printk("PCI MEM window: %08lx-%08lx\n", iomem_resource.start, iomem_resource.end);
+ printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end);
+
+ if (!pci_probe)
+ return -ENXIO;
+
+ dir = pci_check_direct();
+ if (dir)
+ pci_root_ops = dir;
+ else {
+ printk("PCI: No PCI bus detected\n");
+ return -ENXIO;
+ }
+
+ printk("PCI: Probing PCI hardware\n");
+ pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL);
+
+ pcibios_irq_init();
+ pcibios_fixup_peer_bridges();
+ pcibios_fixup_irqs();
+ pcibios_resource_survey();
+
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char * __init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ } else if (!strncmp(str, "lastbus=", 8)) {
+ pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+ return NULL;
+ }
+ return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ return err;
+ pcibios_enable_irq(dev);
+ return 0;
+}
_