Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/usb/net/Kconfig | 56 ++--
drivers/usb/net/Makefile | 1
drivers/usb/net/cdc_ether.c | 500 ++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/net/usbnet.c | 398 -----------------------------------
4 files changed, 528 insertions(+), 427 deletions(-)
diff -puN /dev/null drivers/usb/net/cdc_ether.c
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ devel-akpm/drivers/usb/net/cdc_ether.c 2005-08-22 17:57:41.000000000 -0700
@@ -0,0 +1,500 @@
+/*
+ * CDC Ethernet based networking peripherals
+ * Copyright (C) 2003-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb_cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * probes control interface, claims data interface, collects the bulk
+ * endpoints, activates data interface (if needed), maybe sets MTU.
+ * all pure cdc, except for certain firmware workarounds.
+ */
+int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_interface_descriptor *d;
+ struct cdc_state *info = (void *) &dev->data;
+ int status;
+ int rndis;
+ struct usb_driver *driver = driver_of(intf);
+
+ if (sizeof dev->data < sizeof *info)
+ return -EDOM;
+
+ /* expect strict spec conformance for the descriptors, but
+ * cope with firmware which stores them in the wrong place
+ */
+ if (len == 0 && dev->udev->actconfig->extralen) {
+ /* Motorola SB4100 (and others: Brad Hards says it's
+ * from a Broadcom design) put CDC descriptors here
+ */
+ buf = dev->udev->actconfig->extra;
+ len = dev->udev->actconfig->extralen;
+ if (len)
+ dev_dbg(&intf->dev,
+ "CDC descriptors on config\n");
+ }
+
+ /* this assumes that if there's a non-RNDIS vendor variant
+ * of cdc-acm, it'll fail RNDIS requests cleanly.
+ */
+ rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
+
+ memset(info, 0, sizeof *info);
+ info->control = intf;
+ while (len > 3) {
+ if (buf [1] != USB_DT_CS_INTERFACE)
+ goto next_desc;
+
+ /* use bDescriptorSubType to identify the CDC descriptors.
+ * We expect devices with CDC header and union descriptors.
+ * For CDC Ethernet we need the ethernet descriptor.
+ * For RNDIS, ignore two (pointless) CDC modem descriptors
+ * in favor of a complicated OID-based RPC scheme doing what
+ * CDC Ethernet achieves with a simple descriptor.
+ */
+ switch (buf [2]) {
+ case USB_CDC_HEADER_TYPE:
+ if (info->header) {
+ dev_dbg(&intf->dev, "extra CDC header\n");
+ goto bad_desc;
+ }
+ info->header = (void *) buf;
+ if (info->header->bLength != sizeof *info->header) {
+ dev_dbg(&intf->dev, "CDC header len %u\n",
+ info->header->bLength);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_UNION_TYPE:
+ if (info->u) {
+ dev_dbg(&intf->dev, "extra CDC union\n");
+ goto bad_desc;
+ }
+ info->u = (void *) buf;
+ if (info->u->bLength != sizeof *info->u) {
+ dev_dbg(&intf->dev, "CDC union len %u\n",
+ info->u->bLength);
+ goto bad_desc;
+ }
+
+ /* we need a master/control interface (what we're
+ * probed with) and a slave/data interface; union
+ * descriptors sort this all out.
+ */
+ info->control = usb_ifnum_to_if(dev->udev,
+ info->u->bMasterInterface0);
+ info->data = usb_ifnum_to_if(dev->udev,
+ info->u->bSlaveInterface0);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "master #%u/%p slave #%u/%p\n",
+ info->u->bMasterInterface0,
+ info->control,
+ info->u->bSlaveInterface0,
+ info->data);
+ goto bad_desc;
+ }
+ if (info->control != intf) {
+ dev_dbg(&intf->dev, "bogus CDC Union\n");
+ /* Ambit USB Cable Modem (and maybe others)
+ * interchanges master and slave interface.
+ */
+ if (info->data == intf) {
+ info->data = info->control;
+ info->control = intf;
+ } else
+ goto bad_desc;
+ }
+
+ /* a data interface altsetting does the real i/o */
+ d = &info->data->cur_altsetting->desc;
+ if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "slave class %u\n",
+ d->bInterfaceClass);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_ETHERNET_TYPE:
+ if (info->ether) {
+ dev_dbg(&intf->dev, "extra CDC ether\n");
+ goto bad_desc;
+ }
+ info->ether = (void *) buf;
+ if (info->ether->bLength != sizeof *info->ether) {
+ dev_dbg(&intf->dev, "CDC ether len %u\n",
+ info->ether->bLength);
+ goto bad_desc;
+ }
+ dev->hard_mtu = le16_to_cpu(
+ info->ether->wMaxSegmentSize);
+ /* because of Zaurus, we may be ignoring the host
+ * side link address we were given.
+ */
+ break;
+ }
+next_desc:
+ len -= buf [0]; /* bLength */
+ buf += buf [0];
+ }
+
+ if (!info->header || !info->u || (!rndis && !info->ether)) {
+ dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
+ info->header ? "" : "header ",
+ info->u ? "" : "union ",
+ info->ether ? "" : "ether ");
+ goto bad_desc;
+ }
+
+ /* claim data interface and set it up ... with side effects.
+ * network traffic can't flow until an altsetting is enabled.
+ */
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ return status;
+ status = usbnet_get_endpoints(dev, info->data);
+ if (status < 0) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return status;
+ }
+
+ /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
+ dev->status = NULL;
+ if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
+ struct usb_endpoint_descriptor *desc;
+
+ dev->status = &info->control->cur_altsetting->endpoint [0];
+ desc = &dev->status->desc;
+ if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
+ || !(desc->bEndpointAddress & USB_DIR_IN)
+ || (le16_to_cpu(desc->wMaxPacketSize)
+ < sizeof(struct usb_cdc_notification))
+ || !desc->bInterval) {
+ dev_dbg(&intf->dev, "bad notification endpoint\n");
+ dev->status = NULL;
+ }
+ }
+ if (rndis && !dev->status) {
+ dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return -ENODEV;
+ }
+ return 0;
+
+bad_desc:
+ dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_driver *driver = driver_of(intf);
+
+ /* disconnect master --> disconnect slave */
+ if (intf == info->control && info->data) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ info->data = NULL;
+ }
+
+ /* and vice versa (just in case) */
+ else if (intf == info->data && info->control) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->control, NULL);
+ usb_driver_release_interface(driver, info->control);
+ info->control = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces. The DATA interface is inactive till an altsetting
+ * is selected. Configuration data includes class descriptors.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with.
+ *
+ *-------------------------------------------------------------------------*/
+
+
+static void dumpspeed(struct usbnet *dev, __le32 *speeds)
+{
+ if (netif_msg_timer(dev))
+ devinfo(dev, "link speeds: %u kbps up, %u kbps down",
+ __le32_to_cpu(speeds[0]) / 1000,
+ __le32_to_cpu(speeds[1]) / 1000);
+}
+
+static void cdc_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ if (urb->actual_length < sizeof *event)
+ return;
+
+ /* SPEED_CHANGE can get split into two 8-byte packets */
+ if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+ dumpspeed(dev, (__le32 *) urb->transfer_buffer);
+ return;
+ }
+
+ event = urb->transfer_buffer;
+ switch (event->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: carrier %s",
+ event->wValue ? "on" : "off");
+ if (event->wValue)
+ netif_carrier_on(dev->net);
+ else
+ netif_carrier_off(dev->net);
+ break;
+ case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: speed change (len %d)",
+ urb->actual_length);
+ if (urb->actual_length != (sizeof *event + 8))
+ set_bit(EVENT_STS_SPLIT, &dev->flags);
+ else
+ dumpspeed(dev, (__le32 *) &event[1]);
+ break;
+ // case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: /* RNDIS; or unsolicited */
+ default:
+ deverr(dev, "CDC: unexpected notification %02x!",
+ event->bNotificationType);
+ break;
+ }
+}
+
+static u8 nibble(unsigned char c)
+{
+ if (likely(isdigit(c)))
+ return c - '0';
+ c = toupper(c);
+ if (likely(isxdigit(c)))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static inline int
+get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
+{
+ int tmp, i;
+ unsigned char buf [13];
+
+ tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
+ if (tmp != 12) {
+ dev_dbg(&dev->udev->dev,
+ "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
+ if (tmp >= 0)
+ tmp = -EINVAL;
+ return tmp;
+ }
+ for (i = tmp = 0; i < 6; i++, tmp += 2)
+ dev->net->dev_addr [i] =
+ (nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
+ return 0;
+}
+
+static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ struct cdc_state *info = (void *) &dev->data;
+
+ status = usbnet_generic_cdc_bind(dev, intf);
+ if (status < 0)
+ return status;
+
+ status = get_ethernet_addr(dev, info->ether);
+ if (status < 0) {
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+ return status;
+ }
+
+ /* FIXME cdc-ether has some multicast code too, though it complains
+ * in routine cases. info->ether describes the multicast support.
+ * Implement that here, manipulating the cdc filter as needed.
+ */
+ return 0;
+}
+
+static const struct driver_info cdc_info = {
+ .description = "CDC Ethernet Device",
+ .flags = FLAG_ETHER,
+ // .check_connect = cdc_check_connect,
+ .bind = cdc_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = cdc_status,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+static const struct usb_device_id products [] = {
+/*
+ * First, blacklist any products that are egregiously nonconformant
+ * with the CDC Ethernet specs. Minor braindamage we cope with;
+ * if they're not even trying, they need a separate driver.
+ */
+
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
+ * wire-incompatible with true CDC Ethernet implementations.
+ * (And, it seems, needlessly so...)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* PXA-25x based Sharp Zaurii. Note that it seems some of these
+ * (later models especially) may have shipped only with firmware
+ * advertising false "CDC MDLM" compatibility ... but we're not
+ * clear which models that was, so for now let's assume the worst.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+ /* CDC Ether uses two interfaces, not necessarily consecutive.
+ * We match the main interface, ignoring the optional device
+ * class so we could handle devices that aren't exclusively
+ * CDC ether.
+ *
+ * NOTE: this match must come AFTER entries working around
+ * bugs/quirks in a given product (like Zaurus, above).
+ */
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cdc_driver = {
+ .owner = THIS_MODULE,
+ .name = "cdc_ether",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init cdc_init(void)
+{
+ BUG_ON((sizeof(((struct usbnet *)0)->data)
+ < sizeof(struct cdc_state)));
+
+ return usb_register(&cdc_driver);
+}
+module_init(cdc_init);
+
+static void __exit cdc_exit(void)
+{
+ usb_deregister(&cdc_driver);
+}
+module_exit(cdc_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB CDC Ethernet devices");
+MODULE_LICENSE("GPL");
diff -puN drivers/usb/net/Kconfig~gregkh-usb-usb-usbnet-07 drivers/usb/net/Kconfig
--- devel/drivers/usb/net/Kconfig~gregkh-usb-usb-usbnet-07 2005-08-22 17:57:41.000000000 -0700
+++ devel-akpm/drivers/usb/net/Kconfig 2005-08-22 17:57:41.000000000 -0700
@@ -137,35 +137,6 @@ config USB_PL2301
Choose this option if you're using a host-to-host cable
with one of these chips.
-comment "Intelligent USB Devices/Gadgets"
- depends on USB_USBNET
-
-config USB_CDCETHER
- boolean "CDC Ethernet support (smart devices such as cable modems)"
- depends on USB_USBNET
- default y
- help
- This option supports devices conforming to the Communication Device
- Class (CDC) Ethernet Control Model, a specification that's easy to
- implement in device firmware. The CDC specifications are available
- from <http://www.usb.org/>.
-
- CDC Ethernet is an implementation option for DOCSIS cable modems
- that support USB connectivity, used for non-Microsoft USB hosts.
- The Linux-USB CDC Ethernet Gadget driver is an open implementation.
- This driver should work with at least the following devices:
-
- * Ericsson PipeRider (all variants)
- * Motorola (DM100 and SB4100)
- * Broadcom Cable Modem (reference design)
- * Toshiba PCX1100U
- * ...
-
- This driver creates an interface named "ethX", where X depends on
- what other networking devices you have in use. However, if the
- IEEE 802 "local assignment" bit is set in the address, a "usbX"
- name is used instead.
-
comment "Drivers built using the usbnet core"
config USB_NET_AX8817X
@@ -197,6 +168,32 @@ config USB_NET_AX8817X
what other networking devices you have in use.
+config USB_NET_CDCETHER
+ tristate "CDC Ethernet support (smart devices such as cable modems)"
+ depends on USB_USBNET
+ default y
+ help
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Control Model, a specification that's easy to
+ implement in device firmware. The CDC specifications are available
+ from <http://www.usb.org/>.
+
+ CDC Ethernet is an implementation option for DOCSIS cable modems
+ that support USB connectivity, used for non-Microsoft USB hosts.
+ The Linux-USB CDC Ethernet Gadget driver is an open implementation.
+ This driver should work with at least the following devices:
+
+ * Ericsson PipeRider (all variants)
+ * Motorola (DM100 and SB4100)
+ * Broadcom Cable Modem (reference design)
+ * Toshiba PCX1100U
+ * ...
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
config USB_NET_GL620A
tristate "GeneSys GL620USB-A based cables"
default y
@@ -283,6 +280,7 @@ config USB_EPSON2888
config USB_NET_ZAURUS
tristate "Sharp Zaurus (stock ROMs) and compatible"
depends on USB_USBNET
+ select USB_NET_CDCETHER
select CRC32
help
Choose this option to support the usb networking links used by
diff -puN drivers/usb/net/Makefile~gregkh-usb-usb-usbnet-07 drivers/usb/net/Makefile
--- devel/drivers/usb/net/Makefile~gregkh-usb-usb-usbnet-07 2005-08-22 17:57:41.000000000 -0700
+++ devel-akpm/drivers/usb/net/Makefile 2005-08-22 17:57:41.000000000 -0700
@@ -7,6 +7,7 @@ obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
obj-$(CONFIG_USB_NET_NET1080) += net1080.o
obj-$(CONFIG_USB_NET_SIMPLE) += simple.o
diff -puN drivers/usb/net/usbnet.c~gregkh-usb-usb-usbnet-07 drivers/usb/net/usbnet.c
--- devel/drivers/usb/net/usbnet.c~gregkh-usb-usb-usbnet-07 2005-08-22 17:57:41.000000000 -0700
+++ devel-akpm/drivers/usb/net/usbnet.c 2005-08-22 17:59:19.000000000 -0700
@@ -296,383 +296,6 @@ void usbnet_skb_return (struct usbnet *d
}
EXPORT_SYMBOL_GPL(usbnet_skb_return);
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class declarations.
- * Used by CDC Ethernet, and some CDC variants
- *
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_CDCETHER
-#define NEED_GENERIC_CDC
-#endif
-
-#if defined(CONFIG_USB_ZAURUS) || defined(CONFIG_USB_ZAURUS_MODULE)
-/* Ethernet variant uses funky framing, broken ethernet addressing */
-#define NEED_GENERIC_CDC
-#endif
-
-#ifdef CONFIG_USB_RNDIS
-/* ACM variant uses even funkier framing, complex control RPC scheme */
-#define NEED_GENERIC_CDC
-#endif
-
-
-#ifdef NEED_GENERIC_CDC
-
-#include <linux/usb_cdc.h>
-
-struct cdc_state {
- struct usb_cdc_header_desc *header;
- struct usb_cdc_union_desc *u;
- struct usb_cdc_ether_desc *ether;
- struct usb_interface *control;
- struct usb_interface *data;
-};
-
-static struct usb_driver usbnet_driver;
-
-/*
- * probes control interface, claims data interface, collects the bulk
- * endpoints, activates data interface (if needed), maybe sets MTU.
- * all pure cdc, except for certain firmware workarounds.
- */
-int usbnet_generic_cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- u8 *buf = intf->cur_altsetting->extra;
- int len = intf->cur_altsetting->extralen;
- struct usb_interface_descriptor *d;
- struct cdc_state *info = (void *) &dev->data;
- int status;
- int rndis;
-
- if (sizeof dev->data < sizeof *info)
- return -EDOM;
-
- /* expect strict spec conformance for the descriptors, but
- * cope with firmware which stores them in the wrong place
- */
- if (len == 0 && dev->udev->actconfig->extralen) {
- /* Motorola SB4100 (and others: Brad Hards says it's
- * from a Broadcom design) put CDC descriptors here
- */
- buf = dev->udev->actconfig->extra;
- len = dev->udev->actconfig->extralen;
- if (len)
- dev_dbg (&intf->dev,
- "CDC descriptors on config\n");
- }
-
- /* this assumes that if there's a non-RNDIS vendor variant
- * of cdc-acm, it'll fail RNDIS requests cleanly.
- */
- rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
-
- memset (info, 0, sizeof *info);
- info->control = intf;
- while (len > 3) {
- if (buf [1] != USB_DT_CS_INTERFACE)
- goto next_desc;
-
- /* use bDescriptorSubType to identify the CDC descriptors.
- * We expect devices with CDC header and union descriptors.
- * For CDC Ethernet we need the ethernet descriptor.
- * For RNDIS, ignore two (pointless) CDC modem descriptors
- * in favor of a complicated OID-based RPC scheme doing what
- * CDC Ethernet achieves with a simple descriptor.
- */
- switch (buf [2]) {
- case USB_CDC_HEADER_TYPE:
- if (info->header) {
- dev_dbg (&intf->dev, "extra CDC header\n");
- goto bad_desc;
- }
- info->header = (void *) buf;
- if (info->header->bLength != sizeof *info->header) {
- dev_dbg (&intf->dev, "CDC header len %u\n",
- info->header->bLength);
- goto bad_desc;
- }
- break;
- case USB_CDC_UNION_TYPE:
- if (info->u) {
- dev_dbg (&intf->dev, "extra CDC union\n");
- goto bad_desc;
- }
- info->u = (void *) buf;
- if (info->u->bLength != sizeof *info->u) {
- dev_dbg (&intf->dev, "CDC union len %u\n",
- info->u->bLength);
- goto bad_desc;
- }
-
- /* we need a master/control interface (what we're
- * probed with) and a slave/data interface; union
- * descriptors sort this all out.
- */
- info->control = usb_ifnum_to_if(dev->udev,
- info->u->bMasterInterface0);
- info->data = usb_ifnum_to_if(dev->udev,
- info->u->bSlaveInterface0);
- if (!info->control || !info->data) {
- dev_dbg (&intf->dev,
- "master #%u/%p slave #%u/%p\n",
- info->u->bMasterInterface0,
- info->control,
- info->u->bSlaveInterface0,
- info->data);
- goto bad_desc;
- }
- if (info->control != intf) {
- dev_dbg (&intf->dev, "bogus CDC Union\n");
- /* Ambit USB Cable Modem (and maybe others)
- * interchanges master and slave interface.
- */
- if (info->data == intf) {
- info->data = info->control;
- info->control = intf;
- } else
- goto bad_desc;
- }
-
- /* a data interface altsetting does the real i/o */
- d = &info->data->cur_altsetting->desc;
- if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
- dev_dbg (&intf->dev, "slave class %u\n",
- d->bInterfaceClass);
- goto bad_desc;
- }
- break;
- case USB_CDC_ETHERNET_TYPE:
- if (info->ether) {
- dev_dbg (&intf->dev, "extra CDC ether\n");
- goto bad_desc;
- }
- info->ether = (void *) buf;
- if (info->ether->bLength != sizeof *info->ether) {
- dev_dbg (&intf->dev, "CDC ether len %u\n",
- info->ether->bLength);
- goto bad_desc;
- }
- dev->hard_mtu = le16_to_cpu(
- info->ether->wMaxSegmentSize);
- /* because of Zaurus, we may be ignoring the host
- * side link address we were given.
- */
- break;
- }
-next_desc:
- len -= buf [0]; /* bLength */
- buf += buf [0];
- }
-
- if (!info->header || !info->u || (!rndis && !info->ether)) {
- dev_dbg (&intf->dev, "missing cdc %s%s%sdescriptor\n",
- info->header ? "" : "header ",
- info->u ? "" : "union ",
- info->ether ? "" : "ether ");
- goto bad_desc;
- }
-
- /* claim data interface and set it up ... with side effects.
- * network traffic can't flow until an altsetting is enabled.
- */
- status = usb_driver_claim_interface (&usbnet_driver, info->data, dev);
- if (status < 0)
- return status;
- status = usbnet_get_endpoints (dev, info->data);
- if (status < 0) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
- dev->status = NULL;
- if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
- struct usb_endpoint_descriptor *desc;
-
- dev->status = &info->control->cur_altsetting->endpoint [0];
- desc = &dev->status->desc;
- if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
- || !(desc->bEndpointAddress & USB_DIR_IN)
- || (le16_to_cpu(desc->wMaxPacketSize)
- < sizeof (struct usb_cdc_notification))
- || !desc->bInterval) {
- dev_dbg (&intf->dev, "bad notification endpoint\n");
- dev->status = NULL;
- }
- }
- if (rndis && !dev->status) {
- dev_dbg (&intf->dev, "missing RNDIS status endpoint\n");
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return -ENODEV;
- }
- return 0;
-
-bad_desc:
- dev_info (&dev->udev->dev, "bad CDC descriptors\n");
- return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
-
-void usbnet_cdc_unbind (struct usbnet *dev, struct usb_interface *intf)
-{
- struct cdc_state *info = (void *) &dev->data;
-
- /* disconnect master --> disconnect slave */
- if (intf == info->control && info->data) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- info->data = NULL;
- }
-
- /* and vice versa (just in case) */
- else if (intf == info->data && info->control) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->control, NULL);
- usb_driver_release_interface (&usbnet_driver, info->control);
- info->control = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
-
-#endif /* NEED_GENERIC_CDC */
-
-
-#ifdef CONFIG_USB_CDCETHER
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- *
- * Takes two interfaces. The DATA interface is inactive till an altsetting
- * is selected. Configuration data includes class descriptors.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with.
- *
- *-------------------------------------------------------------------------*/
-
-#include <linux/ctype.h>
-
-
-static void dumpspeed (struct usbnet *dev, __le32 *speeds)
-{
- if (netif_msg_timer (dev))
- devinfo (dev, "link speeds: %u kbps up, %u kbps down",
- __le32_to_cpu(speeds[0]) / 1000,
- __le32_to_cpu(speeds[1]) / 1000);
-}
-
-static void cdc_status (struct usbnet *dev, struct urb *urb)
-{
- struct usb_cdc_notification *event;
-
- if (urb->actual_length < sizeof *event)
- return;
-
- /* SPEED_CHANGE can get split into two 8-byte packets */
- if (test_and_clear_bit (EVENT_STS_SPLIT, &dev->flags)) {
- dumpspeed (dev, (__le32 *) urb->transfer_buffer);
- return;
- }
-
- event = urb->transfer_buffer;
- switch (event->bNotificationType) {
- case USB_CDC_NOTIFY_NETWORK_CONNECTION:
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: carrier %s",
- event->wValue ? "on" : "off");
- if (event->wValue)
- netif_carrier_on(dev->net);
- else
- netif_carrier_off(dev->net);
- break;
- case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: speed change (len %d)",
- urb->actual_length);
- if (urb->actual_length != (sizeof *event + 8))
- set_bit (EVENT_STS_SPLIT, &dev->flags);
- else
- dumpspeed (dev, (__le32 *) &event[1]);
- break;
- // case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: /* RNDIS; or unsolicited */
- default:
- deverr (dev, "CDC: unexpected notification %02x!",
- event->bNotificationType);
- break;
- }
-}
-
-static u8 nibble (unsigned char c)
-{
- if (likely (isdigit (c)))
- return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
- return 10 + c - 'A';
- return 0;
-}
-
-static inline int
-get_ethernet_addr (struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
- int tmp, i;
- unsigned char buf [13];
-
- tmp = usb_string (dev->udev, e->iMACAddress, buf, sizeof buf);
- if (tmp != 12) {
- dev_dbg (&dev->udev->dev,
- "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
- if (tmp >= 0)
- tmp = -EINVAL;
- return tmp;
- }
- for (i = tmp = 0; i < 6; i++, tmp += 2)
- dev->net->dev_addr [i] =
- (nibble (buf [tmp]) << 4) + nibble (buf [tmp + 1]);
- return 0;
-}
-
-static int cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- int status;
- struct cdc_state *info = (void *) &dev->data;
-
- status = usbnet_generic_cdc_bind (dev, intf);
- if (status < 0)
- return status;
-
- status = get_ethernet_addr (dev, info->ether);
- if (status < 0) {
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* FIXME cdc-ether has some multicast code too, though it complains
- * in routine cases. info->ether describes the multicast support.
- */
- return 0;
-}
-
-static const struct driver_info cdc_info = {
- .description = "CDC Ethernet Device",
- .flags = FLAG_ETHER,
- // .check_connect = cdc_check_connect,
- .bind = cdc_bind,
- .unbind = usbnet_cdc_unbind,
- .status = cdc_status,
-};
-
-#endif /* CONFIG_USB_CDCETHER */
#ifdef CONFIG_USB_PL2301
#define HAVE_HARDWARE
@@ -1741,23 +1364,6 @@ static const struct usb_device_id produc
.driver_info = (unsigned long) &rndis_info,
},
#endif
-
-#ifdef CONFIG_USB_CDCETHER
-{
- /* CDC Ether uses two interfaces, not necessarily consecutive.
- * We match the main interface, ignoring the optional device
- * class so we could handle devices that aren't exclusively
- * CDC ether.
- *
- * NOTE: this match must come AFTER entries working around
- * bugs/quirks in a given product (like Zaurus, above).
- */
- USB_INTERFACE_INFO (USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &cdc_info,
-},
-#endif
-
{ }, // END
};
MODULE_DEVICE_TABLE (usb, products);
@@ -1779,10 +1385,6 @@ static int __init usbnet_init(void)
// compiler should optimize these out
BUG_ON (sizeof (((struct sk_buff *)0)->cb)
< sizeof (struct skb_data));
-#ifdef CONFIG_USB_CDCETHER
- BUG_ON ((sizeof (((struct usbnet *)0)->data)
- < sizeof (struct cdc_state)));
-#endif
random_ether_addr(node_id);
_