ChangeSet@1.1379, 2003-07-09 21:58:00-07:00, torvalds@home.osdl.org Fix up the IDE irq disable to take into account some odd-ball IDE controllers without a control register. (Apparently Amiga X-Surf and Amiga Gayle with IDE doubler) Also, clean up the code a bit while I'm at it. ChangeSet@1.1378, 2003-07-09 14:59:50-07:00, torvalds@home.osdl.org Update CREDITS file and other documentation about my new email address. Also, switch the snail-mail address to OSDL from Transmeta. I'm sure they'll enjoy the junk-mail ;) ChangeSet@1.1377, 2003-07-09 14:49:24-07:00, pavel@ucw.cz [PATCH] Fix swsusp with PREEMPT This fixes swsusp with CONFIG_PREEMPT and makes locking a bit more obvious. ChangeSet@1.1376, 2003-07-09 14:47:07-07:00, shemminger@osdl.org [PATCH] Change OSDL address in CREDITS OSDL is new building as of May-2003 ChangeSet@1.1375, 2003-07-09 13:41:38-07:00, torvalds@home.osdl.org Make the gcc version checks use the preprocessor symbols consistently. ChangeSet@1.1374, 2003-07-09 13:40:53-07:00, torvalds@home.osdl.org Fix IDE initialization when we don't probe for interrupts. The driver obviously cannot rely on the interrupt handler when it is probing for interrupts, so the identify code is written to not use interrupts and the probing code will disable the interrupt after having figured out which one it is. The non-probe code should do the same, otherwise confusion happens. ChangeSet@1.1358.15.3, 2003-07-09 11:40:23-05:00, lord@jen.americas.sgi.com Cleanup xfs and pagebuf sysctl code, use posix initializers to avoid confusion in the future over which constants apply to which initializers. ChangeSet@1.1358.15.2, 2003-07-09 11:21:13-05:00, lord@jen.americas.sgi.com Remove unused xfs_syncd.c file ChangeSet@1.1358.15.1, 2003-07-09 11:17:38-05:00, sandeen@sgi.com [XFS] add swsusp support to xfs daemons SGI Modid: 2.5.x-xfs:slinx:152354a ChangeSet@1.1358.13.1, 2003-07-09 16:33:03+01:00, davej@tetrachloride.(none) Merge tetrachloride.(none):/mnt/raid/src/kernel/2.5/bk-linus into tetrachloride.(none):/mnt/raid/src/kernel/2.5/cpufreq ChangeSet@1.1358.2.8, 2003-07-09 16:30:21+01:00, davej@codemonkey.org.uk [CPUFREQ] More misc cleanups. - CPUFREQ_ALL_CPUS is not a valid argument any more, don't mention it in include/linux/cpufreq.h - without a driver->init() function a cpufreq driver isn't even loaded, so remove that check in the per-CPU initialization - whitespace and clarification changes to linux/cpufreq. All from Dominik again.. ChangeSet@1.1358.2.7, 2003-07-09 16:27:21+01:00, davej@codemonkey.org.uk [CPUFREQ] don't care about "rmmod -f". It's expected to break things. More from Dominik ChangeSet@1.1358.2.6, 2003-07-09 16:24:22+01:00, davej@codemonkey.org.uk [CPUFREQ] move cpufreq_restore(), and don't make it dependent on CONFIG_PM From Dominik. ChangeSet@1.1358.2.5, 2003-07-09 16:21:45+01:00, davej@codemonkey.org.uk [CPUFREQ] kobj refcount fixes. Wait with the destruction of cpufreq objects until all references are gone (code partly based on rmk's comparable patch for the PCMCIA subsystem. From Dominik. ChangeSet@1.1358.2.4, 2003-07-09 16:19:20+01:00, davej@codemonkey.org.uk [CPUFREQ] Misc cleanups. ChangeSet@1.1369, 2003-07-08 19:37:53-07:00, jmorris@intercode.com.au [IPSEC]: Do not call request_module() under spinlock in xfrm_get_type(). ChangeSet@1.1368, 2003-07-08 19:10:11-07:00, davem@nuts.ninka.net Merge bk://kernel.bkbits.net/jmorris/ipv6-2.5 into nuts.ninka.net:/home/davem/src/BK/net-2.5 ChangeSet@1.1367, 2003-07-08 18:24:04-07:00, davem@nuts.ninka.net Resolve conflicts in ipconfig.c changes. ChangeSet@1.1366, 2003-07-09 10:30:18+10:00, rddunlap@osdl.org [IPV6] use correct mib struct And spell it correctly :-) ChangeSet@1.1310.117.1, 2003-07-09 00:29:23+01:00, rmk@flint.arm.linux.org.uk [SERIAL] Don't return -ERESTARTSYS if signals aren't pending. ChangeSet@1.1358.1.54, 2003-07-08 16:19:51-07:00, bernie@develer.com [PATCH] Fix problem introduced by do_div() patch - export the __div64_32 symbol for modules; - add likely() to the fast path (divisor>>32 == 0); - add __attribute__((pure)) to __div64_32() prototype so the compiler knows global memory isn't clobbered; - avoid building __div64_32() on 64bit architectures. ChangeSet@1.1358.1.53, 2003-07-08 16:18:05-07:00, pavel@ucw.cz [PATCH] Fix thinko in acpi ChangeSet@1.1358.1.52, 2003-07-08 12:15:27-07:00, torvalds@home.osdl.org Avoid deadlocking on thread shutdown after a vfork. ChangeSet@1.1358.1.51, 2003-07-08 09:55:47-07:00, hirofumi@mail.parknet.co.jp [PATCH] FAT maintainership ChangeSet@1.1358.10.5, 2003-07-09 01:23:54+10:00, yoshfuji@linux-ipv6.org [IPV6] Fix BUG when appending destination options headers This patch fixes BUG when pushing IPv6 destination options over an IPv6 raw socket. Patch is based on one from Thomas Graf . ChangeSet@1.1358.1.49, 2003-07-08 02:15:57-07:00, davem@nuts.ninka.net [SPARC64]: Use kstat_this_cpu where possible. ChangeSet@1.1358.1.48, 2003-07-08 01:37:57-07:00, davem@nuts.ninka.net [SPARC64]: Kill all irq_cpustat_t except __softirq_pending. ChangeSet@1.1358.1.47, 2003-07-08 00:03:03-07:00, davem@nuts.ninka.net [SPARC64]: Move raid xor into library assembler file. ChangeSet@1.1358.12.6, 2003-07-07 23:22:14-07:00, gerg@snapgear.com [PATCH] clean module_exit in m68knommu serial drivers Remove un-used commented module_exit functions from m68knommu ColdFire and 68328 serial drivers. These drivers currently cannot be configured as modules, and they have no exit functions. ChangeSet@1.1358.12.5, 2003-07-07 23:21:47-07:00, gerg@snapgear.com [PATCH] fix security_initcall in m68knommu linker script Global SECURITY_INIT macro cannot be used inside .init section for m68knommu linker script. It is a complete section of its own, need to just list the components individually. ChangeSet@1.1358.12.4, 2003-07-07 23:21:25-07:00, gerg@snapgear.com [PATCH] conditional ROMfs copy for NETtel/5307 board Conditionally copy the ROMfs filesystem on the NETtel/5307 target board only if using a ROMfs. ChangeSet@1.1358.12.3, 2003-07-07 23:21:02-07:00, gerg@snapgear.com [PATCH] DragenEngine interrupt handler to use irqreturn_t DragenEngine setup code updates: - Change interrupt handler return type to irqreturn_t - Allow configure time setting of boot parameters - Clean up warnings ChangeSet@1.1358.12.2, 2003-07-07 23:20:47-07:00, gerg@snapgear.com [PATCH] conditional ROMfs copy for SecureEdgeMP3/5307 board Conditionally copy the ROMfs filesystem on the SecureEdgeMP3/5307 target board only if using a ROMfs. ChangeSet@1.1358.12.1, 2003-07-07 23:20:38-07:00, gerg@snapgear.com [PATCH] 68328 DragenEngine configure updates Configuration updates for 68328 DragenEngine board. Fix up name so that it is "DragenEngine" and clean up eeprom read. ChangeSet@1.1358.8.51, 2003-07-08 01:58:48-04:00, scott.feldman@intel.com [e1000] misc cleanup * whitespace cleanup * removal of unused members of netdev priv struct * extendable arrangement of h/w reset logic ChangeSet@1.1358.8.50, 2003-07-08 01:57:00-04:00, scott.feldman@intel.com [e1000] s/int/unsigned int/ for descriptor ring indexes * Perf cleanup: s/int/unsigned int/ for descriptor ring indexes [suggestion by Jeff Garzik]. * Perf cleanup: cache references to ring elements using local pointer ChangeSet@1.1358.8.49, 2003-07-08 01:54:51-04:00, scott.feldman@intel.com [e1000] h/w workaround for mis-fused parts * h/w workaround: several 10's of thousands of 82547 controllers where mis-fused during manufacturing, resulting in PHY Tx amplitude to be too high and out of spec. This workaround detects those parts, and compensates the Tx amplitude by subtracting ~80mV. ChangeSet@1.1358.8.48, 2003-07-08 01:52:31-04:00, scott.feldman@intel.com [e1000] ethtool diag cleanup * Cleanup: ethtool diags: only reset if not if_running. ChangeSet@1.1358.8.47, 2003-07-08 01:50:33-04:00, scott.feldman@intel.com [e1000] alloc_etherdev failure didn't cleanup regions * Bug fix: alloc_etherdev failure didn't cleanup regions in probe. ChangeSet@1.1358.8.46, 2003-07-08 01:48:54-04:00, scott.feldman@intel.com [e1000] missing Tx cleanup opportunities during intr handling * Bug fix: missing Tx cleanup opportunities during interrupt handling. ChangeSet@1.1358.8.45, 2003-07-08 01:47:37-04:00, scott.feldman@intel.com [e1000] fix VLAN support on PPC64 * Bug fix: fix VLAN support on PPC64 [Mark Rakes (mrakes@vivato.net)] ChangeSet@1.1358.8.44, 2003-07-08 01:46:39-04:00, scott.feldman@intel.com [e1000] request_irq() failure resulted in freeing twice * Bug fix: request_irq() failure resulted in freeing resources twice! [Don Fry (brazilnut@us.ibm.com)] ChangeSet@1.1358.8.43, 2003-07-08 01:46:02-04:00, rl@hellgate.ch [PATCH] via-rhine 1.18-2.5: Fix Rhine-I regression This patch addresses a minor regression reported by Rhine-I users (leading to occasional Tx timeouts). I also merged some cosmetic changes. ChangeSet@1.1358.1.45, 2003-07-07 16:14:10-07:00, trond.myklebust@fys.uio.no [PATCH] make create() follow symlinks again The intent patches broke behaviour w.r.t. following symlinks when doing an open() with file creation. The problem occurs in open_namei() because the LOOKUP_PARENT flag is no longer set when we do the call to follow_link(). ChangeSet@1.1358.1.44, 2003-07-07 15:31:32-07:00, drepper@redhat.com [PATCH] tgkill patch for safe inter-thread signals This is the updated versions of the patch Ingo sent some time ago to implement a new tgkill() syscall which specifies the target thread without any possibility of ambiguity or thread ID wrap races, by passing in both the thread group _and_ the thread ID as the arguments. This is really needed since many/most people still run with limited PID ranges (maybe due to legacy apps breaking) and the PID reuse can cause problems. ChangeSet@1.1358.1.43, 2003-07-07 13:34:25-07:00, pavel@suse.cz [PATCH] suspend SMP-kernel with one CPU This allows suspend to work on UP machines, even if the kernel is compiled for SMP. ChangeSet@1.1358.1.42, 2003-07-07 13:29:28-07:00, spyro@f2s.com [PATCH] ARM26 architecture update ChangeSet@1.1358.1.41, 2003-07-07 13:04:55-07:00, ducrot@poupinou.org [PATCH] powernow-k7 typo fix Due to a typo in powernow-k7.c, the value which correspond to the CPU core multiplicator and the VID value are swapped when we go down to up in frequency step. ChangeSet@1.1358.1.40, 2003-07-07 13:04:09-07:00, paulus@samba.org [PATCH] Compile fix and cleanup for macserial driver This adds a declaration that the macserial driver needs in order to compile correctly, and removes some old SERIAL_DO_RESTART junk which isn't used (SERIAL_DO_RESTART is never defined in this driver) and which I think is incorrect anyway, since it looks to me like it would potentially return an ERESTARTSYS error without a signal pending. ChangeSet@1.1358.1.39, 2003-07-07 13:01:50-07:00, rusty@rustcorp.com.au [PATCH] switch_mm and enter_lazy_tlb: remove cpu arg switch_mm and enter_lazy_tlb take a CPU arg, which is always smp_processor_id(). This is misleading, and pointless if they use per-cpu variables or other optimizations. gcc will eliminate redundant smp_processor_id() (in inline functions) anyway. This removes that arg from all the architectures. ChangeSet@1.1358.1.38, 2003-07-07 13:01:42-07:00, rusty@rustcorp.com.au [PATCH] Make kstat_this_cpu in terms of __get_cpu_var and use it kstat_this_cpu() is defined in terms of per_cpu instead of __get_cpu_var. This patch changes that, and uses it everywhere appropriate. The sched.c change puts it in a local variable, which helps gcc generate better code. ChangeSet@1.1358.1.37, 2003-07-07 13:00:33-07:00, gerg@snapgear.com [PATCH] remove 68360 specific trap init call No longer need the 68360 specific trap init call. The generic interrupt/trap code is now setup to do this itself. ChangeSet@1.1358.1.36, 2003-07-07 13:00:27-07:00, gerg@snapgear.com [PATCH] define raw read/write for m68knommu io access Define the raw read and write access macros for m68knommu. These rae use by MTD drivers in particular. ChangeSet@1.1358.1.35, 2003-07-07 13:00:19-07:00, gerg@snapgear.com [PATCH] cleanup show_process_blocks() for non-mmu targets Clean up show_process_blocks() loop for non-mmu targets. ChangeSet@1.1358.1.34, 2003-07-07 13:00:12-07:00, gerg@snapgear.com [PATCH] define shared lib limits for flat loader This patch includes the last peices of the flat laoder shared library support. Define the shared lib limit and implement a flag for doing kernel level tracing. ChangeSet@1.1358.1.33, 2003-07-07 13:00:04-07:00, gerg@snapgear.com [PATCH] .no .romvec section for DragonEngine/68328 target A couple of minor fixes for the 68328 interrupt setup code. - don't define the .romvec section for DragonEngine build - print newline at end of spurious interrupt count in show_interrupts() ChangeSet@1.1358.1.32, 2003-07-07 12:51:59-07:00, mingo@elte.hu [PATCH] Double unlock in BSD accounting speedup patch doh - double unlock in the acct-is-on path. Noticed by Aneesh Kumar K.V ChangeSet@1.1358.1.30, 2003-07-06 22:36:41-07:00, stevef@linux.local Fix statfs failure due to invalid value for ffree ChangeSet@1.1358.11.33, 2003-07-06 19:58:51-07:00, gerg@snapgear.com [PATCH] conditional ROMfs copy for Cleopatra/5307 board Conditionally copy the ROMfs filesystem on the Cleopatra/5307 target board only if using a ROMfs. ChangeSet@1.1358.11.32, 2003-07-06 19:41:34-07:00, akpm@osdl.org [PATCH] BSD accounting speedup From: Ingo Molnar Most distributions turn on process accounting - but even the common 'accounting is off' case is horrible SMP-scalability-wise: it accesses a global spinlock during every sys_exit() call, which bounces like mad on SMP (and NUMA) systems. (i also got rid of the unused return code.) ChangeSet@1.1358.11.31, 2003-07-06 19:41:27-07:00, akpm@osdl.org [PATCH] display bootserver in /proc/net/pnp From: "lode leroy" I would like to submit a trivial enhancement to display the ip address of the bootserver in /proc/net/pnp This aids me in developing a diskless linux root image to know where it comes from... ChangeSet@1.1358.11.30, 2003-07-06 19:41:19-07:00, akpm@osdl.org [PATCH] Module autoloading for quota From: Jan Kara This implements autoloading of quota modules. ChangeSet@1.1358.11.29, 2003-07-06 19:41:12-07:00, akpm@osdl.org [PATCH] xattr: fine-grained locking From: Andreas Gruenbacher This patch removes the dependency on i_sem in the getxattr and listxattr iops of ext2 and ext3. In addition, the global ext[23]_xattr semaphores go away. Instead of i_sem and the global semaphore, mutual exclusion is now ensured by per-inode xattr semaphores, and by locking the buffers before modifying them. The detailed locking strategy is described in comments in fs/ext[23]/xattr.c. Due to this change it is no longer necessary to take i_sem in ext[23]_permission() for retrieving acls, so the ext[23]_permission_locked() functions go away. Additionally, the patch fixes a race condition in ext[23]_permission: Accessing inode->i_acl was protected by the BKL in 2.4; in 2.5 there no longer is such protection. Instead, inode->i_acl (and inode->i_default_acl) are now accessed under inode->i_lock. (This could be replaced by RCU in the future.) In the ext3 extended attribute code, an new uglines results from locking at the buffer head level: The buffer lock must be held between testing if an xattr block can be modified and the actual modification to prevent races from happening. Before a block can be modified, ext3_journal_get_write_access() must be called. But this requies an unlocked buffer, so I call ext3_journal_get_write_access() before locking the buffer. If it turns out that the buffer cannot be modified, journal_release_buffer() is called. Calling ext3_journal_get_write_access after the test but while the buffer is still locked would be much better. ChangeSet@1.1358.11.28, 2003-07-06 19:41:05-07:00, akpm@osdl.org [PATCH] xattrr: preparation for fine-grained locking From: Andreas Gruenbacher Andrew Morton found that there is lock contention between extended attribute operations (like reading ACLs, which `ls -l' needs to do) and other operations on the same files. This is due to the fact that all extended attribute syscalls take inode->i_sem before calling into the filesystem code. To fix this problem, this patch no longer takes inode->i_sem in the getxattr and listxattr syscalls, and moves the lock taking code into the file systems. (Another patch improves the locking strategy in ext2 and ext3.) ChangeSet@1.1358.11.27, 2003-07-06 19:40:57-07:00, akpm@osdl.org [PATCH] xattr: update-in-place optimisation From: Andreas Gruenbacher It is common to update extended attributes without changing the value's length. This patch optimizes this case. In addition to that, the current code tries to recognize early when extended attribute blocks become empty. This optimization is not of significant value, so this patch removes it, and moves the empty block test further down. ChangeSet@1.1358.11.26, 2003-07-06 19:40:50-07:00, akpm@osdl.org [PATCH] xattr: blockdev inode selection fix From: Andreas Gruenbacher The inode->i_bdev field is not the same as inode->i_sb->s_bdev or bh->b_bdev. We must compare inode->i_sb->s_bdev with bh->b_bdev, or else equal extended attribute block will not be found. ChangeSet@1.1358.11.25, 2003-07-06 19:40:42-07:00, akpm@osdl.org [PATCH] xattr: cleanups From: From: Andreas Gruenbacher * Various minor cleanups and simplifications in the extended attributes and acl code. * Use a smarter shortcut rule in ext[23]_permission(): If the mask contains permissions that are not also contained in the group file mode permission bits, those permissions can never be granted by an acl. (The previous shortcut rule was more coarse.) ChangeSet@1.1358.11.24, 2003-07-06 19:40:35-07:00, akpm@osdl.org [PATCH] proc_attr_lookup() fix From: Daniele Belluci proc_attr_lookup() was missed out in Trond's conversion. (It is behind CONFIG_SECURITY). ChangeSet@1.1358.11.23, 2003-07-06 19:40:27-07:00, akpm@osdl.org [PATCH] breadahead() tweaks - use ll_rw_block(). - use READA - export it to modules. ChangeSet@1.1358.11.22, 2003-07-06 19:40:21-07:00, akpm@osdl.org [PATCH] misc fixes - xfs printk warning fix (dev_t is ulong on ppc64) - unused var in serial_remove() (Daniele Bellucci ) ChangeSet@1.1358.11.21, 2003-07-06 19:40:14-07:00, akpm@osdl.org [PATCH] use task_cpu() not ->thread_info->cpu in sched.c From: Mikael Pettersson This patch fixes two p->thread_info->cpu occurrences in kernel/sched.c to use the task_cpu(p) macro instead, which is optimised on UP. Although one of the occurrences is under #ifdef CONFIG_SMP, it's bad style to use the raw non-optimisable form in non-arch code. ChangeSet@1.1358.11.20, 2003-07-06 19:28:36-07:00, torvalds@home.osdl.org Fix several broken macros to get the "private" field of a seq-file in the networking code. From YOSHIFUJI Hideaki ChangeSet@1.1358.11.19, 2003-07-06 19:25:03-07:00, gerg@snapgear.com [PATCH] flat loader v850 specific support abstracted Architecture specific flat loader code for v850 moved into its own v850 flat.h header. This patch also adds supporti for a number of relocation cases that need to be handled at laod time. Most of this code is originally from Miles Bader . ChangeSet@1.1358.11.18, 2003-07-06 19:24:52-07:00, gerg@snapgear.com [PATCH] flat loader m68knommu specific support abstracted Architecture specific flat loader code for m68knommu moved into its own m68knommu flat.h header. Part of the shared library flat loader update. ChangeSet@1.1358.11.17, 2003-07-06 19:24:20-07:00, gerg@snapgear.com [PATCH] flat loader H8/300 specific support abstracted Architecture specific flat loader code for H8/300 moved into its own H8/300 flat.h header. ChangeSet@1.1358.11.16, 2003-07-06 19:24:13-07:00, gerg@snapgear.com [PATCH] shared library support for MMUless binfmt_flat loader This patch adds shared library support to the MMU application loader, binfmt_flat. This is not new, it is a forward port from the same support in 2.4.x kernels with MMUless support, and has been running for well over a year now. The code support is conditionally compiled on CONFIG_BINFMT_FLAT_SHARED. This change also abstracts a bit more architecture dependent code into the separate flat.h includes. Basically relocations within an application also carry a tag to identify what they refer too (this code or which shared library). This is patched as before at load/run-time with an appropriate address. ChangeSet@1.1358.1.29, 2003-07-06 18:24:48-07:00, stevef@linux.local Signing fixes part 4 of 4 ChangeSet@1.1365, 2003-07-07 10:55:20+10:00, herbert@gondor.apana.org.au [IPSEC] Add policy expiration This patch finally adds policy expiration. Note that it resends soft policy expire messages every 30 seconds. This is needed as when "soft use expire" is used for dead peer detection, a lost message could lead to a dead peer that isn't discovered until the SAs expire. I've only implemented notification for XFRM as I didn't want to just add another PFKEY extension in case it collides with something else. Of course it could be easily done for PFKEY with an extension too. ChangeSet@1.1364, 2003-07-07 10:41:01+10:00, dtor_core@ameritech.net [NET] Attach inner qdiscs to TBF ChangeSet@1.1358.11.15, 2003-07-06 17:20:56-07:00, gerg@snapgear.com [PATCH] simplify access_ok() for all m68knommu targets Unify access_ok for all m68knommu targets. All targets use the common linker script and have common end symbols. So now we can just use a simple check. ChangeSet@1.1358.11.14, 2003-07-06 17:20:31-07:00, gerg@snapgear.com [PATCH] remove unused register from clobber list in down_trylock() Remove "%d0" register from clobber list of down_trylock() for m68knommu. It is not used by the asm code here at all. ChangeSet@1.1358.11.13, 2003-07-06 17:20:14-07:00, gerg@snapgear.com [PATCH] force PAGE_SIZE to be an unsigned long Force PAGE_SIZE for the m68knommu architecture to be an unsigned long. This makes it consistent with all other architectures and cleans up a load of compiler warnings. ChangeSet@1.1358.11.12, 2003-07-06 17:20:00-07:00, gerg@snapgear.com [PATCH] conditional ROMfs copy for Motorola M5307C3 board Conditionally copy the ROMfs filesystem on the Motorola M5307C3 target board only if using a ROMfs. ChangeSet@1.1358.11.11, 2003-07-06 17:19:51-07:00, gerg@snapgear.com [PATCH] selection of boot parameters at configure time for Motorola 5282 targets Allow setting boot time parameters at configuration for Motorola 5282 targets. ChangeSet@1.1358.11.10, 2003-07-06 13:23:55-07:00, torvalds@home.osdl.org Simplify and speed up mmap read-around handling This improves cold-cache program startup noticeably for me, and simplifies the read-ahead logic at the same time. The rules for read-ahead are: - if the vma is marked random, we just do the regular one-page case. Obvious. - if the vma is marked "linear access", we use the regular readahead code. No change in behaviour there (well, we also only consider it a _miss_ if it was marked linear access - the "readahead" and "readaround" things are now totally independent of each other) - otherwise, we look at how many hits/misses we've had for this particular file open for mmap, and if we've had noticeably more misses than hits, we don't bother with read-around. In particular, this means that the "real" read-ahead logic literally only needs to worry about finding sequential accesses, and does not have to worry about the common executable mmap access patthers that have very different behaviour. Some constant tweaking may be a good idea. ChangeSet@1.1358.11.9, 2003-07-06 12:58:33-07:00, mingo@elte.hu [PATCH] another timer overflow thing in add_timer_internal() we simply leave the timer pending forever if the expiry is in more than 0xffffffff jiffies. This means more than 48 days on eg. ia64 - which is not an unrealistic timeout. IIRC crond is happy to use extremely large timeouts. It's better to time out early (if you can call 48 days "early") than to not time out at all. ChangeSet@1.1358.11.8, 2003-07-06 12:58:25-07:00, bernie@develer.com [PATCH] Fix do_div() for all architectures This offers a generic do_div64() that actually does the right thing, unlike some architectures that "optimized" the 64-by-32 divide into just a 32-bit divide. Both ppc and sh were already providing an assembly optimized __div64_32(). I called my function the same, so that their optimized versions will automatically override mine in lib.a. I've only tested extensively on m68knommu (uClinux) and made sure generated code is reasonably short. Should be ok also on parisc, since it's the same algorithm they were using before. - add generic C implementations of the do_div() for 32bit and 64bit archs in asm-generic/div64.h; - add generic library support function __div64_32() to handle the full 64/32 case on 32bit archs; - kill multiple copies of generic do_div() in architecture specific subdirs. Most copies were either buggy or not doing what they were supposed to do; - ensure all surviving instances of do_div() have their parameters correctly parenthesized to avoid funny side-effects; ChangeSet@1.1358.11.7, 2003-07-06 12:58:17-07:00, paulkf@microgate.com [PATCH] synclink_cs.c update Fix arbitration between net open and tty open. Cleanup missed bits of CUA device removal changes. ChangeSet@1.1358.11.6, 2003-07-06 12:58:09-07:00, paulkf@microgate.com [PATCH] synclinkmp.c update Fix arbitration between net open and tty open. Clean up unused locals resulting from latest tty changes. ChangeSet@1.1358.11.5, 2003-07-06 12:58:02-07:00, paulkf@microgate.com [PATCH] synclink.c update Fix arbitration between net open and tty open. Cleanup unused local resulting from latest tty changes. ChangeSet@1.1358.11.4, 2003-07-06 12:33:43-07:00, benh@kernel.crashing.org [PATCH] fix IDE init oops on PowerMac From Mikael Petterson: Booting kernel 2.5.74 on a PowerMac with CONFIG_BLK_DEV_IDE_PMAC=y results in an oops during IDE init, and the box then reboots. The patch below updates drivers/ide/ppc/pmac.c to also set up the hwif->ide_dma_queued_off and hwif->ide_dma_queued_on function pointers, which fixes the oops. Tested on my ancient PM4400. ChangeSet@1.1358.11.3, 2003-07-06 12:33:35-07:00, pavel@ucw.cz [PATCH] New maintainter for nbd I no longer have the time/interest in nbd, and Paul agreed to take it over. ChangeSet@1.1358.11.2, 2003-07-06 10:39:12-07:00, anton@samba.org [PATCH] enable device mapper in compat layer The compat ioctls for device mapper were not being enabled due to an incorrect config option. ChangeSet@1.1363, 2003-07-06 11:34:52+10:00, lode_leroy@hotmail.com [IPV4] display bootserver in /proc/net/pnp With modification from niv@us.ibm.com to only print bootserver if there was one. ChangeSet@1.1358.11.1, 2003-07-05 18:08:19-07:00, akpm@osdl.org [PATCH] Improve mmap readaround This tweaks the mmap read-ahead behaviour so that the prefaulting is largely pointless. - double the minimum readaround chunksize in page_cache_readaround(). - when a seek is detected, collapse the window more slowly. ChangeSet@1.1358.8.42, 2003-07-05 15:15:28-04:00, jgarzik@redhat.com [netdrvr 8139too] fix debug printk printk args had been accidentally reversed ChangeSet@1.1358.1.28, 2003-07-05 11:19:58-07:00, stevef@linux.local Signing fixes part 3 ChangeSet@1.1362, 2003-07-06 03:52:26+10:00, yoshfuji@linux-ipv6.org [ATM] Convert clip neigh table to C99 initializers This converts nlip_tbl to C99 initializers. (and fixes wrong value for proxy_len and locktime.) ChangeSet@1.1358.10.4, 2003-07-06 03:36:27+10:00, yoshfuji@linux-ipv6.org [IPV6] fix algorithm for updating lifetime This patch, depends on "IPV6: remove unused variable," fixes algorithm for updating lifetime according to RFC2462. - We should not delete an address even if prefix is advertised with valid lifetime == 0. - support the "2 hours" rule. ChangeSet@1.1358.10.3, 2003-07-06 03:35:30+10:00, yoshfuji@linux-ipv6.org [IPV6] remove unused variable ChangeSet@1.1358.10.2, 2003-07-06 03:34:40+10:00, yoshfuji@linux-ipv6.org [IPV6] ignore on-link information without on-link flag set On-link flag == 0 in RA message does not mean that the prefix is off-link. It simply means the prefix does not talk about on-link information. ChangeSet@1.1358.10.1, 2003-07-06 03:32:45+10:00, yoshfuji@linux-ipv6.org [NET] Send only unicast NSs in PROBE state. ChangeSet@1.1358.8.41, 2003-07-05 10:17:46-07:00, khc@pm.waw.pl [PATCH] C99 initializers in hdlc_generic.c ChangeSet@1.1358.8.40, 2003-07-05 09:38:27-07:00, akpm@osdl.org [PATCH] i2o_scsi build fix i2o_scsi.c now needs pci.h. ChangeSet@1.1358.8.39, 2003-07-05 09:38:20-07:00, akpm@osdl.org [PATCH] fix rfcomm oops From: ilmari@ilmari.org (Dagfinn Ilmari Mannsaker) It turns out that net/bluetooth/rfcomm/sock.c (and net/bluetooth/hci_sock.c) had been left out when net_proto_family gained an owner field, here's a patch that fixes them both. ChangeSet@1.1358.8.38, 2003-07-05 09:38:13-07:00, akpm@osdl.org [PATCH] MTD build fix for old gcc's From: junkio@cox.net Sigh. Is there a gcc option to tell it to not accept this incompatible C99 extension? ChangeSet@1.1358.8.37, 2003-07-05 09:38:06-07:00, akpm@osdl.org [PATCH] fix current->user->__count leak From: Arvind Kandhare When switch_uid is called, the reference count of the new user is incremented twice. I think the increment in the switch_uid is done because of the reparent_to_init() function which does not increase the __count for root user. But if switch_uid is called from any other function, the reference count is already incremented by the caller by calling alloc_uid for the new user. Hence the count is incremented twice. The user struct will not be deleted even when there are no processes holding a reference count for it. This does not cause any problem currently because nothing is dependent on timely deletion of the user struct. ChangeSet@1.1358.8.36, 2003-07-05 09:38:00-07:00, akpm@osdl.org [PATCH] epoll: microoptimisations From: Davide Libenzi - Inline eventpoll_release() so that __fput() does not need to call in epoll code if the file itself is not registered inside an epoll fd - Add inclusion due __u32 and __u64 usage - Fix debug printf that would otherwise panic if enabled with the new epoll code ChangeSet@1.1358.8.35, 2003-07-05 09:37:54-07:00, akpm@osdl.org [PATCH] bootmem.c cleanups From: Davide Libenzi - Remove a couple of impossible debug checks (unsigneds cannot be negative!) - If __alloc_bootmem_core() fails with a goal and unaligned node_boot_start it'll loop fovever. ChangeSet@1.1358.8.34, 2003-07-05 09:37:46-07:00, akpm@osdl.org [PATCH] after exec_mmap(), exec cannot fail If de_thread() fails in flush_old_exec() then we try to fail the execve(). That is a bad move, because exec_mmap() has already switched the current process over to the new mm. The new process is not yet sufficiently set up to handle the error and the kernel doublefaults and dies. exec_mmap() is the point of no return. Change flush_old_exec() to call de_thread() before running exec_mmap() so the execing program sees the error. I added fault injection to both de_thread() and exec_mmap() - everything now survives OK. ChangeSet@1.1358.8.33, 2003-07-05 09:37:40-07:00, akpm@osdl.org [PATCH] block allocation comments From: Nick Piggin Add some comments to the request allocation code. ChangeSet@1.1358.8.32, 2003-07-05 09:37:34-07:00, akpm@osdl.org [PATCH] get_io_context fixes - pass gfp_flags to get_io_context(): not all callers are forced to use GFP_ATOMIC(). - fix locking in get_io_context(): bump the refcount whilein the exclusive region. - don't go oops in get_io_context() if the kmalloc failed. - in as_get_io_context(): fail the whole thing if we were unable to allocate the AS-specific part. - as_remove_queued_request() cleanup ChangeSet@1.1358.8.31, 2003-07-05 09:37:26-07:00, akpm@osdl.org [PATCH] block request batching From: Nick Piggin The following patch gets batching working how it should be. After a process is woken up, it is allowed to allocate up to 32 requests for 20ms. It does not stop other processes submitting requests if it isn't submitting though. This should allow less context switches, and allow batches of requests from each process to be sent to the io scheduler instead of 1 request from each process. tiobench sequential writes are more than tripled, random writes are nearly doubled over mm1. In earlier tests I generally saw better CPU efficiency but it doesn't show here. There is still debug to be taken out. Its also only on UP. Avg Maximum Lat% Lat% CPU Identifier Rate (CPU%) Latency Latency >2s >10s Eff ------------------- ------ --------- ---------- ------- ------ ---- -2.5.71-mm1 11.13 3.783% 46.10 24668.01 0.84 0.02 294 +2.5.71-mm1 13.21 4.489% 37.37 5691.66 0.76 0.00 294 Random Reads ------------------- ------ --------- ---------- ------- ------ ---- -2.5.71-mm1 0.97 0.582% 519.86 6444.66 11.93 0.00 167 +2.5.71-mm1 1.01 0.604% 484.59 6604.93 10.73 0.00 167 Sequential Writes ------------------- ------ --------- ---------- ------- ------ ---- -2.5.71-mm1 4.85 4.456% 77.80 99359.39 0.18 0.13 109 +2.5.71-mm1 14.11 14.19% 10.07 22805.47 0.09 0.04 99 Random Writes ------------------- ------ --------- ---------- ------- ------ ---- -2.5.71-mm1 0.46 0.371% 14.48 6173.90 0.23 0.00 125 +2.5.71-mm1 0.86 0.744% 24.08 8753.66 0.31 0.00 115 It decreases context switch rate on IBM's 8-way on ext2 tiobench 64 threads from ~2500/s to ~140/s on their regression tests. ChangeSet@1.1358.8.30, 2003-07-05 09:37:19-07:00, akpm@osdl.org [PATCH] generic io contexts From: Nick Piggin Generalise the AS-specific per-process IO context so that other IO schedulers could use it. ChangeSet@1.1358.8.29, 2003-07-05 09:37:12-07:00, akpm@osdl.org [PATCH] block batching fairness From: Nick Piggin This patch fixes the request batching fairness/starvation issue. Its not clear what is going on with 2.4, but it seems that its a problem around this area. Anyway, previously: * request queue fills up * process 1 calls get_request, sleeps * a couple of requests are freed * process 2 calls get_request, proceeds * a couple of requests are freed * process 2 calls get_request... Now as unlikely as it seems, it could be a problem. Its a fairness problem that process 2 can skip ahead of process 1 anyway. With the patch: * request queue fills up * any process calling get_request will sleep * once the queue gets below the batch watermark, processes start being worken, and may allocate. This patch includes Chris Mason's fix to only clear queue_full when all tasks have been woken. Previously I think starvation and unfairness could still occur. With this change to the blk-fair-batches patch, Chris is showing some much improved numbers for 2.4 - 170 ms max wait vs 2700ms without blk-fair-batches for a dbench 90 run. He didn't indicate how much difference his patch alone made, but it is an important fix I think. ChangeSet@1.1358.8.28, 2003-07-05 09:37:05-07:00, akpm@osdl.org [PATCH] handle OOM in get_request_wait() From: Nick Piggin If there are no requess in flight against the target device and get_request() fails, nothing will wake us up. Fix. ChangeSet@1.1358.8.27, 2003-07-05 09:36:59-07:00, akpm@osdl.org [PATCH] allow the IO scheduler to pass an allocation hint to From: Nick Piggin This patch implements a hint so that AS can tell the request allocator to allocate a request even if there are none left (the accounting is quite flexible and easily handles overallocations). elv_may_queue semantics have changed from "the elevator does _not_ want another request allocated" to "the elevator _insists_ that another request is allocated". I couldn't see any harm ;) Now in practice, AS will only allow _1_ request over the limit, because as soon as the request is sent to AS, it stops anticipating. ChangeSet@1.1358.8.26, 2003-07-05 09:36:51-07:00, akpm@osdl.org [PATCH] blk_congestion_wait threshold cleanup From: Nick Piggin Now that we are counting requests (not requests free), this patch changes the congested & batch watermarks to be more logical. Also a minor fix to the sysfs code. ChangeSet@1.1358.8.25, 2003-07-05 09:36:44-07:00, akpm@osdl.org [PATCH] per queue nr_requests From: Nick Piggin This gets rid of the global queue_nr_requests and usage of BLKDEV_MAX_RQ (the latter is now only used to set the queues' defaults). The queue depth becomes per-queue, controlled by a sysfs entry. ChangeSet@1.1358.8.24, 2003-07-05 09:36:37-07:00, akpm@osdl.org [PATCH] Use kblockd for running request queues Using keventd for running request_fns is risky because keventd itself can block on disk I/O. Use the new kblockd kernel threads for the generic unplugging. ChangeSet@1.1358.8.23, 2003-07-05 09:36:30-07:00, akpm@osdl.org [PATCH] anticipatory I/O scheduler From: Nick Piggin This is the core anticipatory IO scheduler. There are nearly 100 changesets in this and five months work. I really cannot describe it fully here. Major points: - It works by recognising that reads are dependent: we don't know where the next read will occur, but it's probably close-by the previous one. So once a read has completed we leave the disk idle, anticipating that a request for a nearby read will come in. - There is read batching and write batching logic. - when we're servicing a batch of writes we will refuse to seek away for a read for some tens of milliseconds. Then the write stream is preempted. - when we're servicing a batch of reads (via anticipation) we'll do that for some tens of milliseconds, then preempt. - There are request deadlines, for latency and fairness. The oldest outstanding request is examined at regular intervals. If this request is older than a specific deadline, it will be the next one dispatched. This gives a good fairness heuristic while being simple because processes tend to have localised IO. Just about all of the rest of the complexity involves an array of fixups which prevent most of teh obvious failure modes with anticipation: trying to not leave the disk head pointlessly idle. Some of these algorithms are: - Process tracking. If the process whose read we are anticipating submits a write, abandon anticipation. - Process exit tracking. If the process whose read we are anticipating exits, abandon anticipation. - Process IO history. We accumulate statistical info on the process's recent IO patterns to aid in making decisions about how long to anticipate new reads. Currently thinktime and seek distance are tracked. Thinktime is the time between when a process's last request has completed and when it submits another one. Seek distance is simply the number of sectors between each read request. If either statistic becomes too high, the it isn't anticipated that the process will submit another read. The above all means that we need a per-process "io context". This is a fully refcounted structure. In this patch it is AS-only. later we generalise it a little so other IO schedulers could use the same framework. - Requests are grouped as synchronous and asynchronous whereas deadline scheduler groups requests as reads and writes. This can provide better sync write performance, and may give better responsiveness with journalling filesystems (although we haven't done that yet). We currently detect synchronous writes by nastily setting PF_SYNCWRITE in current->flags. The plan is to remove this later, and to propagate the sync hint from writeback_contol.sync_mode into bio->bi_flags thence into request->flags. Once that is done, direct-io needs to set the BIO sync hint as well. - There is also quite a bit of complexity gone into bashing TCQ into submission. Timing for a read batch is not started until the first read request actually completes. A read batch also does not start until all outstanding writes have completed. AS is the default IO scheduler. deadline may be chosen by booting with "elevator=deadline". There are a few reasons for retaining deadline: - AS is often slower than deadline in random IO loads with large TCQ windows. The usual real world task here is OLTP database loads. - deadline is presumably more stable. - deadline is much simpler. The tunable per-queue entries under /sys/block/*/iosched/ are all in milliseconds: * read_expire Controls how long until a request becomes "expired". It also controls the interval between which expired requests are served, so set to 50, a request might take anywhere < 100ms to be serviced _if_ it is the next on the expired list. Obviously it can't make the disk go faster. Result is basically the timeslice a reader gets in the presence of other IO. 100*((seek time / read_expire) + 1) is very roughly the % streaming read efficiency your disk should get in the presence of multiple readers. * read_batch_expire Controls how much time a batch of reads is given before pending writes are served. Higher value is more efficient. Shouldn't really be below read_expire. * write_ versions of the above * antic_expire Controls the maximum amount of time we can anticipate a good read before giving up. Many other factors may cause anticipation to be stopped early, or some processes will not be "anticipated" at all. Should be a bit higher for big seek time devices though not a linear correspondance - most processes have only a few ms thinktime. ChangeSet@1.1358.8.22, 2003-07-05 09:36:23-07:00, akpm@osdl.org [PATCH] elevator completion API From: Nick Piggin Introduces an elevator_completed_req() callback with which the generic queueing layer may tell an IO scheduler that a particualr request has finished. ChangeSet@1.1358.8.21, 2003-07-05 09:36:16-07:00, akpm@osdl.org [PATCH] elv_may_queue() API function Introduces the elv_may_queue() predicate with which the IO scheduler may tell the generic request layer that we may add another request to this queue. It is used by the CFQ elevator. ChangeSet@1.1358.8.20, 2003-07-05 09:36:09-07:00, akpm@osdl.org [PATCH] Create `kblockd' workqueue keventd is inappropriate for running block request queues because keventd itself can get blocked on disk I/O. Via call_usermodehelper()'s vfork and, presumably, GFP_KERNEL allocations. So create a new gang of kernel threads whose mandate is for running low-level disk operations. It must ever block on disk IO, so any memory allocations should be GFP_NOIO. We mainly use it for running unplug operations from interrupt context. ChangeSet@1.1358.8.19, 2003-07-05 09:36:03-07:00, akpm@osdl.org [PATCH] bring back the batch_requests function From: Nick Piggin The batch_requests function got lost during the merge of the dynamic request allocation patch. We need it for the anticipatory scheduler - when the number of threads exceeds the number of requests, the anticipated-upon task will undesirably sleep in get_request_wait(). And apparently some block devices which use small requests need it so they string a decent number together. Jens has acked this patch. ChangeSet@1.1358.8.18, 2003-07-05 09:35:55-07:00, akpm@osdl.org [PATCH] ipc semaphore optimization From: "Chen, Kenneth W" This patch proposes a performance fix for the current IPC semaphore implementation. There are two shortcoming in the current implementation: try_atomic_semop() was called two times to wake up a blocked process, once from the update_queue() (executed from the process that wakes up the sleeping process) and once in the retry part of the blocked process (executed from the block process that gets woken up). A second issue is that when several sleeping processes that are eligible for wake up, they woke up in daisy chain formation and each one in turn to wake up next process in line. However, every time when a process wakes up, it start scans the wait queue from the beginning, not from where it was last scanned. This causes large number of unnecessary scanning of the wait queue under a situation of deep wait queue. Blocked processes come and go, but chances are there are still quite a few blocked processes sit at the beginning of that queue. What we are proposing here is to merge the portion of the code in the bottom part of sys_semtimedop() (code that gets executed when a sleeping process gets woken up) into update_queue() function. The benefit is two folds: (1) is to reduce redundant calls to try_atomic_semop() and (2) to increase efficiency of finding eligible processes to wake up and higher concurrency for multiple wake-ups. We have measured that this patch improves throughput for a large application significantly on a industry standard benchmark. This patch is relative to 2.5.72. Any feedback is very much appreciated. Some kernel profile data attached: Kernel profile before optimization: ----------------------------------------------- 0.05 0.14 40805/529060 sys_semop [133] 0.55 1.73 488255/529060 ia64_ret_from_syscall [2] [52] 2.5 0.59 1.88 529060 sys_semtimedop [52] 0.05 0.83 477766/817966 schedule_timeout [62] 0.34 0.46 529064/989340 update_queue [61] 0.14 0.00 1006740/6473086 try_atomic_semop [75] 0.06 0.00 529060/989336 ipcperms [149] ----------------------------------------------- 0.30 0.40 460276/989340 semctl_main [68] 0.34 0.46 529064/989340 sys_semtimedop [52] [61] 1.5 0.64 0.87 989340 update_queue [61] 0.75 0.00 5466346/6473086 try_atomic_semop [75] 0.01 0.11 477676/576698 wake_up_process [146] ----------------------------------------------- 0.14 0.00 1006740/6473086 sys_semtimedop [52] 0.75 0.00 5466346/6473086 update_queue [61] [75] 0.9 0.89 0.00 6473086 try_atomic_semop [75] ----------------------------------------------- Kernel profile with optimization: ----------------------------------------------- 0.03 0.05 26139/503178 sys_semop [155] 0.46 0.92 477039/503178 ia64_ret_from_syscall [2] [61] 1.2 0.48 0.97 503178 sys_semtimedop [61] 0.04 0.79 470724/784394 schedule_timeout [62] 0.05 0.00 503178/3301773 try_atomic_semop [109] 0.05 0.00 503178/930934 ipcperms [149] 0.00 0.03 32454/460210 update_queue [99] ----------------------------------------------- 0.00 0.03 32454/460210 sys_semtimedop [61] 0.06 0.36 427756/460210 semctl_main [75] [99] 0.4 0.06 0.39 460210 update_queue [99] 0.30 0.00 2798595/3301773 try_atomic_semop [109] 0.00 0.09 470630/614097 wake_up_process [146] ----------------------------------------------- 0.05 0.00 503178/3301773 sys_semtimedop [61] 0.30 0.00 2798595/3301773 update_queue [99] [109] 0.3 0.35 0.00 3301773 try_atomic_semop [109] -----------------------------------------------=20 Both number of function calls to try_atomic_semop() and update_queue() are reduced by 50% as a result of the merge. Execution time of sys_semtimedop is reduced because of the reduction in the low level functions. ChangeSet@1.1358.8.17, 2003-07-05 09:35:49-07:00, akpm@osdl.org [PATCH] PCI domain scanning fix From: Matthew Wilcox ppc64 oopses on boot because pci_scan_bus_parented() is unexpectedly returning NULL. Change pci_scan_bus_parented() to correctly handle overlapping PCI bus numbers on different domains. ChangeSet@1.1358.8.15, 2003-07-04 18:57:37-07:00, drepper@redhat.com [PATCH] wrong pid in siginfo_t If a signal is sent via kill() or tkill() the kernel fills in the wrong PID value in the siginfo_t structure (obviously only if the handler has SA_SIGINFO set). POSIX specifies the the si_pid field is filled with the process ID, and in Linux parlance that's the "thread group" ID, not the thread ID. ChangeSet@1.1358.8.14, 2003-07-04 17:53:27-07:00, torvalds@home.osdl.org When forcing through a signal for some thread-synchronous event (ie SIGSEGV, SIGFPE etc that happens as a result of a trap as opposed to an external event), if the signal is blocked we will not invoce a signal handler, we will just kill the thread with the signal. This is equivalent to what we do in the SIG_IGN case: you cannot ignore or block synchronous signals, and if you try, we'll just have to kill you. We don't want to handle endless recursive faults, which the old behaviour easily led to if the stack was bad, for example. ChangeSet@1.1358.8.13, 2003-07-04 17:24:32-07:00, torvalds@home.osdl.org Go back to defaulting to 6-byte commands for MODE SENSE, since some drivers seem to be unhappy about the 10-byte version. The subsystem configuration can override this (eg USB or ide-scsi). ChangeSet@1.1358.8.12, 2003-07-04 17:00:47-07:00, mzyngier@freesurf.fr [PATCH] EISA: avoid unnecessary probing - By default, do not try to probe the bus if the mainboard does not seems to support EISA (allow this behaviour to be changed through a command-line option). ChangeSet@1.1358.8.11, 2003-07-04 17:00:39-07:00, mzyngier@freesurf.fr [PATCH] EISA: PCI-EISA dma_mask - Use parent bridge device dma_mask as default for each discovered device. ChangeSet@1.1358.8.10, 2003-07-04 17:00:33-07:00, mzyngier@freesurf.fr [PATCH] EISA: PA-RISC changes - Probe the right number of EISA slots on PA-RISC. No more, no less. ChangeSet@1.1358.8.9, 2003-07-04 17:00:26-07:00, mzyngier@freesurf.fr [PATCH] EISA: More EISA ids ChangeSet@1.1358.8.8, 2003-07-04 17:00:19-07:00, mzyngier@freesurf.fr [PATCH] EISA: Documentation update ChangeSet@1.1358.8.7, 2003-07-04 17:00:12-07:00, mzyngier@freesurf.fr [PATCH] EISA: core changes - Now reserves I/O ranges according to EISA specs (four 256 bytes regions instead of a single 4KB region). - By default, do not try to probe the bus if the mainboard does not seems to support EISA (allow this behaviour to be changed through a command-line option). - Use parent bridge device dma_mask as default for each discovered device. - Allow devices to be enabled or disabled from the kernel command line (useful for non-x86 platforms where the firmware simply disable devices it doesn't know about...). ChangeSet@1.1358.1.26, 2003-07-04 16:05:52-07:00, cifs.adm@hostme.bitkeeper.com Merge bk://linux.bkbits.net/linux-2.5 into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs ChangeSet@1.1358.1.25, 2003-07-04 16:32:31-07:00, stevef@linux.local Update cifs vfs information and readme ChangeSet@1.1358.3.3, 2003-07-04 15:07:32-07:00, stevef@linux.local Signing fixes part 2 ChangeSet@1.1358.8.5, 2003-07-04 14:13:56-07:00, torvalds@home.osdl.org Carl-Daniel Hailfinger suggest adding a paranoid incoming trigger as per the "bk help triggers" suggestion, so that we'll see any new triggers showing up in the tree. Make it so. ChangeSet@1.1358.8.4, 2003-07-04 12:07:27-07:00, trond.myklebust@fys.uio.no [PATCH] Use the intents in 'nameidata' to improve NFS close-to-open consistency - Make use of the open intents to improve close-to-open cache consistency. Only force data cache revalidation when we're doing an open(). - Add true exclusive create to NFSv3. - Optimize away the redundant ->lookup() to check for an existing file when we know that we're doing NFSv3 exclusive create. - Optimize away all ->permission() checks other than those for path traversal, open(), and sys_access(). ChangeSet@1.1358.8.3, 2003-07-04 12:06:43-07:00, trond.myklebust@fys.uio.no [PATCH] Pass 'nameidata' to ->permission() - Make the VFS pass the struct nameidata as an optional parameter to the permission() inode operation. - Patch may_create()/may_open() so it passes the struct nameidata from vfs_create()/open_namei() as an argument to permission(). - Add an intent flag for the sys_access() function. ChangeSet@1.1358.8.2, 2003-07-04 12:06:21-07:00, trond.myklebust@fys.uio.no [PATCH] Pass 'nameidata' to ->create() - Make the VFS pass the struct nameidata as an optional argument to the create inode operation. - Patch vfs_create() to take a struct nameidata as an optional argument. ChangeSet@1.1358.8.1, 2003-07-04 12:06:06-07:00, trond.myklebust@fys.uio.no [PATCH] Add open intent information to the 'struct nameidata' - Add open intent information to the 'struct nameidata'. - Pass the struct nameidata as an optional parameter to the lookup() inode operation. - Pass the struct nameidata as an optional parameter to the d_revalidate() dentry operation. - Make link_path_walk() set the LOOKUP_CONTINUE flag in nd->flags instead of passing it as an extra parameter to d_revalidate(). - Make open_namei(), and sys_uselib() set the open()/create() intent data. ChangeSet@1.1358.1.22, 2003-07-03 20:23:39-07:00, jgarzik@pobox.com [PATCH] fix via irq routing Via irq routing has a funky PIRQD location. I checked my datasheets and, yep, this is correct all the way back to via686a. This bug existed for _ages_. I wonder if I created it, even... ChangeSet@1.1358.5.30, 2003-07-03 19:20:52-07:00, torvalds@home.osdl.org Re-organize "ext3_get_inode_loc()" and make it easier to follow by splitting it into two functions: one that calculates the position, and the other that actually reads the inode block off the disk. ChangeSet@1.1358.5.29, 2003-07-03 18:54:42-07:00, torvalds@home.osdl.org Add an asynchronous buffer read-ahead facility. Nobody uses it for now, but I needed it for some tuning tests, and it is potentially useful for others. ChangeSet@1.1358.1.20, 2003-07-03 17:52:16-07:00, greg@kroah.com Merge kroah.com:/home/linux/BK/bleed-2.5 into kroah.com:/home/linux/BK/pci-2.5 ChangeSet@1.1358.1.19, 2003-07-03 17:51:08-07:00, greg@kroah.com driver core: add my copyright to class.c ChangeSet@1.1358.1.18, 2003-07-03 17:43:49-07:00, greg@kroah.com [PATCH] driver core: added class_device_rename() Based on a patch written by Dan Aloni ChangeSet@1.1358.1.17, 2003-07-03 17:43:34-07:00, greg@kroah.com [PATCH] kobject: add kobject_rename() Based on a patch written by Dan Aloni ChangeSet@1.1358.1.16, 2003-07-03 17:43:18-07:00, greg@kroah.com [PATCH] sysfs: add sysfs_rename_dir() Based on a patch written by Dan Aloni ChangeSet@1.1358.1.15, 2003-07-03 16:39:18-07:00, johnstul@us.ibm.com [PATCH] jiffies include fix This patch fixes a bad declaration of jiffies in timer_tsc.c and timer_cyclone.c, replacing it with the proper usage of jiffies.h. Caught by gregkh. ChangeSet@1.1358.1.14, 2003-07-03 16:28:49-07:00, greg@kroah.com [PATCH] SYSFS: add module referencing to sysfs attribute files. ChangeSet@1.1358.1.13, 2003-07-03 16:06:08-07:00, greg@kroah.com [PATCH] sysfs: change print() to pr_debug() to not annoy everyone. ChangeSet@1.1358.1.12, 2003-07-03 15:52:29-07:00, willy@debian.org [PATCH] Driver Core: fix firmware binary files Fixes the sysfs binary file bug. ChangeSet@1.1358.1.11, 2003-07-03 15:52:14-07:00, willy@debian.org [PATCH] PCI config space in sysfs - Fix a couple of bugs in sysfs's handling of binary files (my fault). - Implement pci config space reads and writes in sysfs ChangeSet@1.1358.1.10, 2003-07-03 15:51:59-07:00, willy@debian.org [PATCH] PCI: arch/i386/pci/legacy.c: use raw_pci_ops Make pcibios_fixup_peer_bridges() use raw_pci_ops directly instead of faking pci_bus and pci_dev. ChangeSet@1.1358.1.9, 2003-07-03 15:51:45-07:00, willy@debian.org [PATCH] PCI: arch/i386/pci/irq.c should use pci_find_bus Use pci_find_bus rather than relying on the return value of pci_scan_bus. ChangeSet@1.1358.1.8, 2003-07-03 15:51:30-07:00, willy@debian.org [PATCH] PCI: Remove pci_bus_exists Convert all callers of pci_bus_exists() to call pci_find_bus() instead. Since all callers of pci_find_bus() are __init or __devinit, mark it as __devinit too. ChangeSet@1.1358.1.7, 2003-07-03 15:51:15-07:00, willy@debian.org [PATCH] PCI: pci_find_bus needs a domain Give pci_find_bus a domain argument and move its declaration to ChangeSet@1.1358.1.6, 2003-07-03 15:50:59-07:00, willy@debian.org [PATCH] PCI: arch/i386/pci/direct.c can use __init, not __devinit pci_sanity_check() is only called from functions marked __init, so it can be __init too. ChangeSet@1.1358.1.5, 2003-07-03 15:50:39-07:00, willy@debian.org [PATCH] PCI: Improve documentation Fix some grammar problems Add a note about Fast Back to Back support Change the slot_name recommendation to pci_name(). ChangeSet@1.1358.6.2, 2003-07-03 17:02:05+01:00, davej@codemonkey.org.uk [AGPGART] Fill out bridge structure with pdev before querying agp version. ChangeSet@1.1358.7.3, 2003-07-03 15:45:44+00:00, ambx1@neo.rr.com [PNP] Fix manual resource setting API This patch corrects a trivial thinko in the manual resource api. ChangeSet@1.1358.7.2, 2003-07-03 15:42:36+00:00, ambx1@neo.rr.com [PNP] Allow resource auto config to assign disabled resources This patch updates the resource manager so that it actually assigns disabled resources when they are requested by the device. ChangeSet@1.1358.7.1, 2003-07-03 15:39:09+00:00, ambx1@neo.rr.com [PNP] Handle Disabled Resources Properly Some devices will allow for individual resources to be disabled, even when the device as a whole is active. The current PnP resource manager is not handling this situation properly. This patch corrects the issue by detecting disabled resources and then flagging them. The pnp layer will now skip over any disabled resources. Interface updates have also been included so that we can properly display resource tables when a resource is disabled. Also note that a new flag "IORESOURCE_DISABLED" has been added to linux/ioports.h. ChangeSet@1.1310.111.2, 2003-07-03 14:34:26+01:00, davej@codemonkey.org.uk [AGPGART] Add AGP3 support for all VIA AGP3 chipsets. Previously, only KT400 worked. Now, if we detect an AGP3 header, we check the chipset to see if theres an AGP3 gfx card too (which puts the chipset into 3.0 mode), and then adjust the agp_bridge struct accordingly. ChangeSet@1.1361, 2003-07-03 20:02:25+10:00, yoshfuji@linux-ipv6.org [NET] Fix oops with /proc/net/{raw,igmp,mfilter, raw6,igmp6,mfilter6,anycast,ip6_flowlabel}. ChangeSet@1.1358.5.27, 2003-07-03 00:39:31-07:00, torvalds@home.osdl.org The sbp2 driver needs , but didn't include it. It apparently used to work due to some random magic indirect include, but broke lately. Do the obvious fix. ChangeSet@1.1358.5.26, 2003-07-03 00:38:29-07:00, rusty@rustcorp.com.au [PATCH] Make ksoftirqd a normal per-cpu variable. This moves the ksoftirqd pointers out of the irq_stat struct, and uses a normal per-cpu variable. It's not that time critical, nor referenced in assembler. This moves us closer to making irq_stat a per-cpu variable. Because some archs have hardcoded asm references to offsets in this structure, I haven't touched non-x86. The __ksoftirqd_task field is unused in other archs, too. ChangeSet@1.1358.5.25, 2003-07-03 00:38:21-07:00, rusty@rustcorp.com.au [PATCH] Remove unused __syscall_count Noone seems to use __syscall_count. Remove the field from i386 irq_cpustat_t struct, and the generic accessor macros. Because some archs have hardcoded asm references to offsets in this structure, I haven't touched non-x86, but doing so is usually trivial. ChangeSet@1.1358.5.24, 2003-07-03 00:32:57-07:00, rusty@rustcorp.com.au [PATCH] Per-cpu variable in mm/slab.c Rather trivial conversion. Tested on SMP. ChangeSet@1.1358.5.23, 2003-07-03 00:32:49-07:00, rusty@rustcorp.com.au [PATCH] Remove cpu arg from cpu_raise_irq The function cpu_raise_softirq() takes a softirq number, and a cpu number, but cannot be used with cpu != smp_processor_id(), because there's no locking around the pending softirq lists. Since noone does this, remove that arg. As per Linus' suggestion, names changed: raise_softirq(int nr) cpu_raise_softirq(int cpu, int nr) -> raise_softirq_irqoff(int nr) __cpu_raise_softirq(int cpu, int nr) -> __raise_softirq_irqoff(int nr) ChangeSet@1.1358.5.22, 2003-07-02 22:50:27-07:00, akpm@osdl.org [PATCH] e100 use-after-free fix I though Scott had recently merged this but it seems not. We'll be needing this patch if you merge Manfred's page unmapping debug patch. ChangeSet@1.1358.5.21, 2003-07-02 22:50:19-07:00, akpm@osdl.org [PATCH] Fix cciss hang From: Jens Axboe It fixes a hang when performing large I/O's. Has been tested and acked by the maintainer, "Wiran, Francis" . ChangeSet@1.1358.5.20, 2003-07-02 22:50:11-07:00, akpm@osdl.org [PATCH] Set limits on CONFIG_LOG_BUF_SHIFT From: bert hubert Attached patch adds a range check to LOG_BUF_SHIFT and clarifies the configuration somewhat. I managed to build a non-booting kernel because I thought 64 was a nice power of two, which lead to the kernel blocking when it tried to actually use or allocate a 2^64 buffer. ChangeSet@1.1358.5.19, 2003-07-02 22:50:04-07:00, akpm@osdl.org [PATCH] ext3: fix journal_release_buffer() race CPU0 CPU1 journal_get_write_access(bh) (Add buffer to t_reserved_list) journal_get_write_access(bh) (It's already on t_reserved_list: nothing to do) (We decide we don't want to journal the buffer after all) journal_release_buffer() (It gets pulled off the transaction) journal_dirty_metadata() (The buffer isn't on the reserved list! The kernel explodes) Simple fix: just leave the buffer on t_reserved_list in journal_release_buffer(). If nobody ends up claiming the buffer then it will get thrown away at start of transaction commit. ChangeSet@1.1358.5.18, 2003-07-02 22:49:50-07:00, akpm@osdl.org [PATCH] fix double mmdrop() on exec path If load_elf_binary() (and the other binary handlers) fail after flush_old_exec() (for example, in setup_arg_pages()) then do_execve() will go through and do mmdrop(bprm.mm). But bprm.mm is now current->mm. We've just freed the current process's mm. The kernel dies in a most ghastly manner. Fix that up by nulling out bprm.mm in flush_old_exec(), at the point where we consumed the mm. Handle the null pointer in the do_execve() error path. Also: don't open-code free_arg_pages() in do_execve(): call it instead. ChangeSet@1.1358.5.17, 2003-07-02 22:49:43-07:00, akpm@osdl.org [PATCH] ext2: inode allocation race fix ext2's inode allocator will call find_group_orlov(), which will return a suitable blockgroup in which the inode should be allocated. But by the time we actually try to allocate an inode in the blockgroup, other CPUs could have used them all up. ext2 will bogusly fail with "ext2_new_inode: Free inodes count corrupted in group NN". To fix this we just advance onto the next blockgroup if the rare race happens. If we've scanned all blockgroups then return -ENOSPC. (This is a bit inaccurate: after we've scanned all blockgroups, there may still be available inodes due to inode freeing activity in other blockgroups. This cannot be fixed without fs-wide locking. The effect is a slightly early ENOSPC in a nearly-full filesystem). ChangeSet@1.1358.5.16, 2003-07-02 22:49:35-07:00, akpm@osdl.org [PATCH] Security hook for vm_enough_memory From: Stephen Smalley This patch against 2.5.73 replaces vm_enough_memory with a security hook per Alan Cox's suggestion so that security modules can completely replace the logic if desired. Note that the patch changes the interface to follow the convention of the other security hooks, i.e. return 0 if ok or -errno on failure (-ENOMEM in this case) rather than returning a boolean. It also exports various variables and functions required for the vm_enough_memory logic. ChangeSet@1.1358.5.15, 2003-07-02 22:49:26-07:00, akpm@osdl.org [PATCH] cleanup and generalise lowmem_page_address From: William Lee Irwin III This patch allows architectures to micro-optimize lowmem_page_address() at their whims. Roman Zippel originally wrote and/or suggested this back when dependencies on page->virtual existing were being shaken out. That's long-settled, so it's fine to do this now. ChangeSet@1.1358.5.14, 2003-07-02 22:49:14-07:00, akpm@osdl.org [PATCH] fix lost-tick compensation corner-case From: john stultz This patch catches a corner case in the lost-tick compensation code. There is a check to see if we overflowed between reads of the two time sources, however should the high res time source be slightly slower then what we calibrated, its possible to trigger this code when no ticks have been lost. This patch adds an extra check to insure we have seen more then one tick before we check for this overflow. This seems to resolve the remaining "time doubling" issues that I've seen reported. ChangeSet@1.1358.5.13, 2003-07-02 22:49:07-07:00, akpm@osdl.org [PATCH] fix lost_tick detector for speedstep From: john stultz The patch tries to resolve issues caused by running the TSC based lost tick compensation code on CPUs that change frequency (speedstep, etc). Should the CPU be in slow mode when calibrate_tsc() executes, the kernel will assume we have so many cycles per tick. Later when the cpu speeds up, the kernel will start noting that too many cycles have past since the last interrupt. Since this can occasionally happen, the lost tick compensation code then tries to fix this by incrementing jiffies. Thus every tick we end up incrementing jiffies many times, causing timers to expire too quickly and time to rush ahead. This patch detects when there has been 100 consecutive interrupts where we had to compensate for lost ticks. If this occurs, we spit out a warning and fall back to using the PIT as a time source. I've tested this on my speedstep enabled laptop with success, and others laptop users seeing this problem have reported it works for them. Also to ensure we don't fall back to the slower PIT too quickly, I tested the code on a system I have that looses ~30 ticks about every second and it can still manage to use the TSC as a good time source. This solves most of the "time doubling" problems seen on laptops. Additionally this revision has been modified to use the cleanups made in rename-timer_A1. ChangeSet@1.1358.5.12, 2003-07-02 22:48:59-07:00, akpm@osdl.org [PATCH] timer renaming and cleanups From: john stultz This renames the bad "timer" variable to "cur_timer" and moves externs to .h files. ChangeSet@1.1358.5.11, 2003-07-02 22:48:52-07:00, akpm@osdl.org [PATCH] Report detached thread exit to the debugger From: Daniel Jacobowitz Right now, CLONE_DETACHED threads silently vanish from GDB's sight when they exit. This patch lets the thread report its exit to the debugger, and then be auto-reaped as soon as it is collected, instead of being reaped as soon as it exits and not reported at all. GDB works either way, but this is more correct and will be useful for some later GDB patches. ChangeSet@1.1358.5.10, 2003-07-02 22:48:41-07:00, akpm@osdl.org [PATCH] Make CONFIG_TC35815 depend on CONFIG_TOSHIBA_JMR3927 From: Adrian Bunk I got an error at the final linking with CONFIG_TC35815 enabled since the variables tc_readl and tc_writel are not available. The only place where they are defined is arch/mips/pci/ops-jmr3927.c. ChangeSet@1.1358.5.9, 2003-07-02 22:48:33-07:00, akpm@osdl.org [PATCH] block_llseek(): remove lock_kernel() Replace it with the blockdev inode's i_sem. And we only really need that for atomic access to file->f_pos. ChangeSet@1.1358.5.8, 2003-07-02 22:48:26-07:00, akpm@osdl.org [PATCH] remove lock_kernel() from file_ops.flush() Rework the file_ops.flush() API sothat it is no longer called under lock_kernel(). Push lock_kernel() down to all impementations except CIFS, which doesn't want it. ChangeSet@1.1358.5.7, 2003-07-02 22:48:18-07:00, akpm@osdl.org [PATCH] procfs: remove some unneeded lock_kernel()s From: William Lee Irwin III Remove spurious BKL acquisitions in /proc/. The BKL is not required to access nr_threads for reporting, and get_locks_status() takes it internally, wrapping all operations with it. ChangeSet@1.1358.5.6, 2003-07-02 22:48:06-07:00, akpm@osdl.org [PATCH] nommu vmtruncate: remove lock_kernel() lock_kernel() need not be held across truncate. ChangeSet@1.1358.5.5, 2003-07-02 22:47:59-07:00, akpm@osdl.org [PATCH] inode_change_ok(): remove lock_kernel() `attr' is on the stack, and the inode's contents can change as soon as we return from inode_change_ok() anyway. I can't see anything which is actually being locked in there. ChangeSet@1.1358.5.4, 2003-07-02 22:47:51-07:00, akpm@osdl.org [PATCH] ramfs: use rgeneric_file_llseek Teach ramfs to use generic_file_llseek: default_llseek takes lock_kernel(). ChangeSet@1.1358.5.3, 2003-07-02 22:47:43-07:00, akpm@osdl.org [PATCH] NUMA memory reporting fix From: Dave Hansen The current numa meminfo code exports (via sysfs) pgdat->node_size, as totalram. This variable is consistently used elsewhere to mean "the number of physical pages that this particular node spans". This is _not_ what we want to see from meminfo, which is: "how much actual memory does this node have?" The following patch removes pgdat->node_size, and replaces it with ->node_spanned_pages. This is to avoid confusion with a new variable, node_present_pages, which is the _actual_ value that we want to export in meminfo. Most of the patch is a simple s/node_size/node_spanned_pages/. The node_size() macro is also removed, and replaced with new ones for node_{spanned,present}_pages() to avoid confusion. We were bitten by this problem in this bug: http://bugme.osdl.org/show_bug.cgi?id=818 Compiled and tested on NUMA-Q. ChangeSet@1.1358.5.2, 2003-07-02 22:47:30-07:00, akpm@osdl.org [PATCH] page unmapping debug From: Manfred Spraul Manfred's latest page unmapping debug patch. The patch adds support for a special debug mode to both the page and the slab allocator: Unused pages are removed from the kernel linear mapping. This means that now any access to freed memory will cause an immediate exception. Right now, read accesses remain totally unnoticed and write accesses may be catched by the slab poisoning, but usually far too late for a meaningfull bug report. The implementation is based on a new arch dependant function, kernel_map_pages(), that removes the pages from the linear mapping. It's right now only implemented for i386. Changelog: - Add kernel_map_pages() for i386, based on change_page_attr. If DEBUG_PAGEALLOC is not set, then the function is an empty stub. The stub is in , i.e. it exists for all archs. - Make change_page_attr irq safe. Note that it's not fully irq safe due to the lack of the tlb flush ipi, but it's good enough for kernel_map_pages(). Another problem is that kernel_map_pages is not permitted to fail, thus PSE is disabled if DEBUG_PAGEALLOC is enabled - use kernel_map pages for the page allocator. - use kernel_map_pages for the slab allocator. I couldn't resist and added additional debugging support into mm/slab.c: * at kfree time, the complete backtrace of the kfree caller is stored in the freed object. * a ptrinfo() function that dumps all known data about a kernel virtual address: the pte value, if it belongs to a slab cache the cache name and additional info. * merging of common code: new helper function obj_dbglen and obj_dbghdr for the conversion between the user visible object pointers/len and the actual, internal addresses and len values. ChangeSet@1.1358.5.1, 2003-07-02 22:47:23-07:00, akpm@osdl.org [PATCH] move_vma() make_pages_present() fix From: Hugh Dickins mremap's move_vma VM_LOCKED case was still wrong. If the do_munmap unmaps a part of new_vma, then its vm_start and vm_end from before cannot both be the right addresses for the make_pages_present range, and may BUG() there. We need [new_addr, new_addr+new_len) to be locked down; but move_page_tables already transferred the locked pages [new_addr, new_addr+old_len), and they're either held in a VM_LOCKED vma throughout, or temporarily in no vma: in neither case can be swapped out, so no need to run over that range again. ChangeSet@1.1360, 2003-07-03 10:53:47+10:00, yoshfuji@linux-ipv6.org [IPV6] fix a mistake in ipv6_advmss() conversion ChangeSet@1.1358.4.4, 2003-07-03 10:44:48+10:00, paulus@samba.org Merge bk://stop.crashing.org/linux-2.5-misc into samba.org:/home/paulus/kernel/for-linus-ppc ChangeSet@1.1358.4.1, 2003-07-02 16:02:30-07:00, ilmari@ilmari.org [PATCH] Allow modular DM With the recent fixes, io_schedule needs to be exported for modular dm to work. ChangeSet@1.1310.82.6, 2003-07-02 21:52:11+01:00, davej@codemonkey.org.uk [CPUFREQ] update cpufreq docs to reflect newly merged architecture support From Dominik Brodowski ChangeSet@1.1310.82.5, 2003-07-02 21:50:41+01:00, davej@codemonkey.org.uk [CPUFREQ] Fix stupid inverted FID/VID bug. Spotted by Luigi Belli ChangeSet@1.1358.2.1, 2003-07-02 11:16:48-07:00, torvalds@home.osdl.org Linux 2.5.74 TAG: v2.5.74