commit c2ea16582cfb89c5e3457a680d018f165cfdc208 Author: Greg Kroah-Hartman Date: Tue Mar 8 19:04:10 2022 +0100 Linux 4.19.233 Link: https://lore.kernel.org/r/20220307091636.988950823@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Hulk Robot Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Jeffrin Jose T Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 8f9df98d455970497c866c94e8d56d1bb98c27f9 Author: Huang Pei Date: Tue Nov 23 19:07:48 2021 +0800 hamradio: fix macro redefine warning commit 16517829f2e02f096fb5ea9083d160381127faf3 upstream. MIPS/IA64 define END as assembly function ending, which conflict with END definition in mkiss.c, just undef it at first Reported-by: lkp@intel.com Signed-off-by: Huang Pei Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit a6a21ff5cfc21be757e4b825acf873eabc3bb4e2 Author: Vladimir Oltean Date: Wed Mar 2 21:39:39 2022 +0200 net: dcb: disable softirqs in dcbnl_flush_dev() commit 10b6bb62ae1a49ee818fc479cf57b8900176773e upstream. Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable software interrupts before taking dcb_lock"), the DCB API can be called by drivers from softirq context. One such in-tree example is the chelsio cxgb4 driver: dcb_rpl -> cxgb4_dcb_handle_fw_update -> dcb_ieee_setapp If the firmware for this driver happened to send an event which resulted in a call to dcb_ieee_setapp() at the exact same time as another DCB-enabled interface was unregistering on the same CPU, the softirq would deadlock, because the interrupted process was already holding the dcb_lock in dcbnl_flush_dev(). Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as in the rest of the dcbnl code. Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices") Reported-by: Ido Schimmel Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 01bba3f3b1f11f576af5602c861cfc0e62c7376f Author: Filipe Manana Date: Mon Feb 28 16:29:28 2022 +0000 btrfs: add missing run of delayed items after unlink during log replay commit 4751dc99627e4d1465c5bfa8cb7ab31ed418eff5 upstream. During log replay, whenever we need to check if a name (dentry) exists in a directory we do searches on the subvolume tree for inode references or or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY keys as well, before kernel 5.17). However when during log replay we unlink a name, through btrfs_unlink_inode(), we may not delete inode references and dir index keys from a subvolume tree and instead just add the deletions to the delayed inode's delayed items, which will only be run when we commit the transaction used for log replay. This means that after an unlink operation during log replay, if we attempt to search for the same name during log replay, we will not see that the name was already deleted, since the deletion is recorded only on the delayed items. We run delayed items after every unlink operation during log replay, except at unlink_old_inode_refs() and at add_inode_ref(). This was due to an overlook, as delayed items should be run after evert unlink, for the reasons stated above. So fix those two cases. Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation") Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 44a99561718d5e1d8471162c0f3f842f8e63c248 Author: Steven Rostedt (Google) Date: Tue Mar 1 22:29:04 2022 -0500 tracing/histogram: Fix sorting on old "cpu" value commit 1d1898f65616c4601208963c3376c1d828cbf2c7 upstream. When trying to add a histogram against an event with the "cpu" field, it was impossible due to "cpu" being a keyword to key off of the running CPU. So to fix this, it was changed to "common_cpu" to match the other generic fields (like "common_pid"). But since some scripts used "cpu" for keying off of the CPU (for events that did not have "cpu" as a field, which is most of them), a backward compatibility trick was added such that if "cpu" was used as a key, and the event did not have "cpu" as a field name, then it would fallback and switch over to "common_cpu". This fix has a couple of subtle bugs. One was that when switching over to "common_cpu", it did not change the field name, it just set a flag. But the code still found a "cpu" field. The "cpu" field is used for filtering and is returned when the event does not have a "cpu" field. This was found by: # cd /sys/kernel/tracing # echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger # cat events/sched/sched_wakeup/hist Which showed the histogram unsorted: { cpu: 19, pid: 1175 } hitcount: 1 { cpu: 6, pid: 239 } hitcount: 2 { cpu: 23, pid: 1186 } hitcount: 14 { cpu: 12, pid: 249 } hitcount: 2 { cpu: 3, pid: 994 } hitcount: 5 Instead of hard coding the "cpu" checks, take advantage of the fact that trace_event_field_field() returns a special field for "cpu" and "CPU" if the event does not have "cpu" as a field. This special field has the "filter_type" of "FILTER_CPU". Check that to test if the returned field is of the CPU type instead of doing the string compare. Also, fix the sorting bug by testing for the hist_field flag of HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use the special CPU field to know what compare routine to use, and since that special field does not have a size, it returns tracing_map_cmp_none. Cc: stable@vger.kernel.org Fixes: 1e3bac71c505 ("tracing/histogram: Rename "cpu" to "common_cpu"") Reported-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 463c2accd61fe8c664dfcb9d9de50f632363ad28 Author: Hugh Dickins Date: Fri Mar 4 20:29:01 2022 -0800 memfd: fix F_SEAL_WRITE after shmem huge page allocated commit f2b277c4d1c63a85127e8aa2588e9cc3bd21cb99 upstream. Wangyong reports: after enabling tmpfs filesystem to support transparent hugepage with the following command: echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled the docker program tries to add F_SEAL_WRITE through the following command, but it fails unexpectedly with errno EBUSY: fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1. That is because memfd_tag_pins() and memfd_wait_for_pins() were never updated for shmem huge pages: checking page_mapcount() against page_count() is hopeless on THP subpages - they need to check total_mapcount() against page_count() on THP heads only. Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins() (compared != 1): either can be justified, but given the non-atomic total_mapcount() calculation, it is better now to be strict. Bear in mind that total_mapcount() itself scans all of the THP subpages, when choosing to take an XA_CHECK_SCHED latency break. Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a page has been swapped out since memfd_tag_pins(), then its refcount must have fallen, and so it can safely be untagged. Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.com Signed-off-by: Hugh Dickins Reported-by: Zeal Robot Reported-by: wangyong Cc: Mike Kravetz Cc: Matthew Wilcox (Oracle) Cc: CGEL ZTE Cc: Kirill A. Shutemov Cc: Song Liu Cc: Yang Yang Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit a472c95af5f64296fc9bdbabcd2b11703bb3a205 Author: William Mahon Date: Thu Mar 3 18:26:22 2022 -0800 HID: add mapping for KEY_ALL_APPLICATIONS commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream. This patch adds a new key definition for KEY_ALL_APPLICATIONS and aliases KEY_DASHBOARD to it. It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS. Signed-off-by: William Mahon Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit e7e904785f6caa27c63e86f70221b762998b15a1 Author: Hans de Goede Date: Mon Feb 28 23:39:50 2022 -0800 Input: elan_i2c - fix regulator enable count imbalance after suspend/resume commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream. Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit e1f8106ecd74a01dd0cb51c37cd7999dd7ee7315 Author: Hans de Goede Date: Mon Feb 28 23:39:38 2022 -0800 Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power() commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream. elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 19e164396ba9f1f11e35cfc575c07b23a83ee5b9 Author: Jiasheng Jiang Date: Tue Mar 1 18:00:20 2022 +0800 nl80211: Handle nla_memdup failures in handle_nan_filter [ Upstream commit 6ad27f522cb3b210476daf63ce6ddb6568c0508b ] As there's potential for failure of the nla_memdup(), check the return value. Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit cc437a0a5b00d36e0258221843893d44efdf4afe Author: Jia-Ju Bai Date: Fri Feb 25 04:37:27 2022 -0800 net: chelsio: cxgb3: check the return value of pci_find_capability() [ Upstream commit 767b9825ed1765894e569a3d698749d40d83762a ] The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b857bcb5e5ad200b92cea8704e1a8c8f80a34025 Author: Jiasheng Jiang Date: Thu Dec 30 09:45:43 2021 +0800 soc: fsl: qe: Check of ioremap return value [ Upstream commit a222fd8541394b36b13c89d1698d9530afd59a9c ] As the possible failure of the ioremap(), the par_io could be NULL. Therefore it should be better to check it and return error in order to guarantee the success of the initiation. But, I also notice that all the caller like mpc85xx_qe_par_io_init() in `arch/powerpc/platforms/85xx/common.c` don't check the return value of the par_io_init(). Actually, par_io_init() needs to check to handle the potential error. I will submit another patch to fix that. Anyway, par_io_init() itsely should be fixed. Fixes: 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc") Signed-off-by: Jiasheng Jiang Signed-off-by: Li Yang Signed-off-by: Sasha Levin commit 786576c03b313a9ff6585458aa0dfd039d897f51 Author: Sukadev Bhattiprolu Date: Thu Feb 24 22:23:51 2022 -0800 ibmvnic: free reset-work-item when flushing commit 8d0657f39f487d904fca713e0bc39c2707382553 upstream. Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 94f6ffabcbaf5dad1384a35f5871dc7d7a55898f Author: Randy Dunlap Date: Wed Feb 23 20:46:35 2022 +0100 ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions commit 7b83299e5b9385943a857d59e15cba270df20d7e upstream. early_param() handlers should return 0 on success. __setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 would cause the "option=value" string to be added to init's environment strings, polluting it. ../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy': ../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type] ../arch/arm/mm/mmu.c: In function 'test_noalign_setup': ../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type] Fixes: b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Cc: Uwe Kleine-König Cc: linux-arm-kernel@lists.infradead.org Cc: patches@armlinux.org.uk Signed-off-by: Russell King (Oracle) Signed-off-by: Greg Kroah-Hartman commit 2048c116a3beca132200345bacab160d30fa7e28 Author: Brian Norris Date: Fri Jan 14 15:02:07 2022 -0800 arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output commit b5fbaf7d779f5f02b7f75b080e7707222573be2a upstream. Commit b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") switched the platform to SPDIF, but we didn't fix up the device tree. Drop the pinctrl settings, because the 'spdif_bus' pins are either: * unused (on kevin, bob), so the settings is ~harmless * used by a different function (on scarlet), which causes probe failures (!!) Fixes: b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") Signed-off-by: Brian Norris Reviewed-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeid Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit e8051fab1d81a5b46a4f87955cb96f4c44a4091b Author: Vincent Mailhol Date: Tue Feb 15 08:48:14 2022 +0900 can: gs_usb: change active_channels's type from atomic_t to u8 commit 035b0fcf02707d3c9c2890dc1484b11aa5335eb1 upstream. The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 07f8fd4947f73f7955dc42e3f72f215c50a9e9e9 Author: Alyssa Ross Date: Fri Feb 11 10:27:04 2022 +0000 firmware: arm_scmi: Remove space in MODULE_ALIAS name commit 1ba603f56568c3b4c2542dfba07afa25f21dcff3 upstream. modprobe can't handle spaces in aliases. Get rid of it to fix the issue. Link: https://lore.kernel.org/r/20220211102704.128354-1-sudeep.holla@arm.com Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI") Reviewed-by: Cristian Marussi Signed-off-by: Alyssa Ross Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman commit 65f8a203cfa58f3c382015f854589e369301d84d Author: Jann Horn Date: Fri Feb 18 19:05:59 2022 +0100 efivars: Respect "block" flag in efivar_entry_set_safe() commit 258dd902022cb10c83671176688074879517fd21 upstream. When the "block" flag is false, the old code would sometimes still call check_var_size(), which wrongly tells ->query_variable_store() that it can block. As far as I can tell, this can't really materialize as a bug at the moment, because ->query_variable_store only does something on X86 with generic EFI, and in that configuration we always take the efivar_entry_set_nonblocking() path. Fixes: ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()") Signed-off-by: Jann Horn Signed-off-by: Ard Biesheuvel Link: https://lore.kernel.org/r/20220218180559.1432559-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman commit b838add93e1dd98210482dc433768daaf752bdef Author: Zheyu Ma Date: Wed Mar 2 20:24:23 2022 +0800 net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() commit bd6f1fd5d33dfe5d1b4f2502d3694a7cc13f166d upstream. During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first. Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata") Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 113bb5ad082cd5560746f4be1aaf3518009fc240 Author: Randy Dunlap Date: Wed Feb 23 19:35:28 2022 -0800 net: sxgbe: fix return value of __setup handler commit 50e06ddceeea263f57fe92baa677c638ecd65bb6 upstream. __setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Siva Reddy Cc: Girish K S Cc: Byungho An Link: https://lore.kernel.org/r/20220224033528.24640-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit a548e6796514351cb22c128a7906245d7e19fe52 Author: Randy Dunlap Date: Wed Feb 23 19:35:36 2022 -0800 net: stmmac: fix return value of __setup handler commit e01b042e580f1fbf4fd8da467442451da00c7a90 upstream. __setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Cc: Jose Abreu Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit dd13b055d24d67ae342c5775cbc8454514a7cee9 Author: Nicolas Escande Date: Mon Feb 14 18:32:14 2022 +0100 mac80211: fix forwarded mesh frames AC & queue selection commit 859ae7018316daa4adbc496012dcbbb458d7e510 upstream. There are two problems with the current code that have been highlighted with the AQL feature that is now enbaled by default. First problem is in ieee80211_rx_h_mesh_fwding(), ieee80211_select_queue_80211() is used on received packets to choose the sending AC queue of the forwarding packet although this function should only be called on TX packet (it uses ieee80211_tx_info). This ends with forwarded mesh packets been sent on unrelated random AC queue. To fix that, AC queue can directly be infered from skb->priority which has been extracted from QOS info (see ieee80211_parse_qos()). Second problem is the value of queue_mapping set on forwarded mesh frames via skb_set_queue_mapping() is not the AC of the packet but a hardware queue index. This may or may not work depending on AC to HW queue mapping which is driver specific. Both of these issues lead to improper AC selection while forwarding mesh packets but more importantly due to improper airtime accounting (which is done on a per STA, per AC basis) caused traffic stall with the introduction of AQL. Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding") Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Co-developed-by: Remi Pommarel Signed-off-by: Remi Pommarel Signed-off-by: Nicolas Escande Link: https://lore.kernel.org/r/20220214173214.368862-1-nico.escande@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 198cdc287769c717dafff5887c6125cb7a373bf3 Author: Marek Marczykowski-Górecki Date: Wed Feb 23 22:19:54 2022 +0100 xen/netfront: destroy queues before real_num_tx_queues is zeroed commit dcf4ff7a48e7598e6b10126cc02177abb8ae4f3f upstream. xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit ff27f7d0333cff89ec85c419f431aca1b38fb16a Author: Lukas Wunner Date: Wed Nov 17 23:22:09 2021 +0100 PCI: pciehp: Fix infinite loop in IRQ handler upon power fault commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream. The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989 Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race") Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de Reported-by: Joseph Bao Tested-by: Joseph Bao Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # v4.19+ Cc: Stuart Hayes [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 6a139c9ec5082b43d0f32c5cb5d68e7a3792d409 Author: Ye Bin Date: Mon Nov 29 09:26:59 2021 +0800 block: Fix fsync always failed if once failed commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream. We do test with inject error fault base on v4.19, after test some time we found sync /dev/sda always failed. [root@localhost] sync /dev/sda sync: error syncing '/dev/sda': Input/output error scsi log as follows: [19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b [19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK [19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0 [19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0) [19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes [19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done. [19069.812564] print_req_error: I/O error, dev sda, sector 0 ftrace log as follows: rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep] rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep] kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H] -0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0] -0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5] As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq' reference count isn't zero. If flush request once failed and record error code in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync will always failed. To address this issue reset 'fq->rq_status' after return error code to upper layer. Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()") Signed-off-by: Ye Bin Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com Signed-off-by: Jens Axboe [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 9b64b0928207be2aabc5e6c71be86d469ebd3256 Author: D. Wythe Date: Wed Mar 2 21:25:12 2022 +0800 net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server commit 4940a1fdf31c39f0806ac831cde333134862030b upstream. The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear. Based on the fact that whether a new SMC connection can be accepted or not depends on not only the limit of conn nums, but also the available entries of rtoken. Since the rtoken release is trigger by peer, while the conn nums is decrease by local, tons of thing can happen in this time difference. This only thing that needs to be mentioned is that now all connection creations are completely protected by smc_server_lgr_pending lock, it's enough to check only the available entries in rtokens_used_mask. Fixes: cd6851f30386 ("smc: remote memory buffers (RMBs)") Signed-off-by: D. Wythe Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e84b216e55ac570f7a137e3bc78c80fc44f6aa2e Author: D. Wythe Date: Wed Mar 2 21:25:11 2022 +0800 net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client commit 0537f0a2151375dcf90c1bbfda6a0aaf57164e89 upstream. The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client dues to following execution sequence: Server Conn A: Server Conn B: Client Conn B: smc_lgr_unregister_conn smc_lgr_register_conn smc_clc_send_accept -> smc_rtoken_add smcr_buf_unuse -> Client Conn A: smc_rtoken_delete smc_lgr_unregister_conn() makes current link available to assigned to new incoming connection, while smcr_buf_unuse() has not executed yet, which means that smc_rtoken_add may fail because of insufficient rtoken_entry, reversing their execution order will avoid this problem. Fixes: 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers") Signed-off-by: D. Wythe Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 155e6abb1d71078ef3a0bf38c4cb3f69b200e9fa Author: Vladimir Oltean Date: Thu Feb 24 18:01:54 2022 +0200 net: dcb: flush lingering app table entries for unregistered devices commit 91b0383fef06f20b847fa9e4f0e3054ead0b1a1b upstream. If I'm not mistaken (and I don't think I am), the way in which the dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates the application table with dynamically allocated struct dcb_app_type entries that are kept in the module-global dcb_app_list. However, nobody keeps exact track of these entries, and although dcb_ieee_delapp() is supposed to remove them, nobody does so when the interface goes away (example: driver unbinds from device). So the dcb_app_list will contain lingering entries with an ifindex that no longer matches any device in dcb_app_lookup(). Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and flushing the app table entries of interfaces that are now gone. In fact something like this used to be done as part of the initial commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(), essentially at module_exit time. That became dead code after commit 7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged "tristate config DCB" and "bool config DCBNL" into a single "bool config DCB", so net/dcb/dcbnl.c could not be built as a module anymore. Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular") recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether, leaving us with the version we have today. Since flushing application table entries can and should be done as soon as the netdevice disappears, fundamentally the commit that is to blame is the one that introduced the design of this API. Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 92a556ef51590bcacfe691124c10d31e12693690 Author: Sven Eckelmann Date: Sun Feb 27 23:23:49 2022 +0100 batman-adv: Don't expect inter-netns unique iflink indices commit 6c1f41afc1dbe59d9d3c8bb0d80b749c119aa334 upstream. The ifindex doesn't have to be unique for multiple network namespaces on the same machine. $ ip netns add test1 $ ip -net test1 link add dummy1 type dummy $ ip netns add test2 $ ip -net test2 link add dummy2 type dummy $ ip -net test1 link show dev dummy1 6: dummy1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff $ ip -net test2 link show dev dummy2 6: dummy2: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff But the batman-adv code to walk through the various layers of virtual interfaces uses this assumption because dev_get_iflink handles it internally and doesn't return the actual netns of the iflink. And dev_get_iflink only documents the situation where ifindex == iflink for physical devices. But only checking for dev->netdev_ops->ndo_get_iflink is also not an option because ipoib_get_iflink implements it even when it sometimes returns an iflink != ifindex and sometimes iflink == ifindex. The caller must therefore make sure itself to check both netns and iflink + ifindex for equality. Only when they are equal, a "physical" interface was detected which should stop the traversal. On the other hand, vxcan_get_iflink can also return 0 in case there was currently no valid peer. In this case, it is still necessary to stop. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Reported-by: Sabrina Dubroca Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman commit 130ec90cb3a20a6635fad5307a47f4c5155b74cc Author: Sven Eckelmann Date: Mon Feb 28 00:01:24 2022 +0100 batman-adv: Request iflink once in batadv_get_real_netdevice commit 6116ba09423f7d140f0460be6a1644dceaad00da upstream. There is no need to call dev_get_iflink multiple times for the same net_device in batadv_get_real_netdevice. And since some of the ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman commit 86b66abce8ca4c47e7c972ec297a00417499edb4 Author: Sven Eckelmann Date: Mon Feb 28 00:01:24 2022 +0100 batman-adv: Request iflink once in batadv-on-batadv check commit 690bb6fb64f5dc7437317153902573ecad67593d upstream. There is no need to call dev_get_iflink multiple times for the same net_device in batadv_is_on_batman_iface. And since some of the .ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman commit 34dc4a6a7f261736ef7183868a5bddad31c7f9e3 Author: Florian Westphal Date: Mon Feb 28 06:22:22 2022 +0100 netfilter: nf_queue: fix possible use-after-free commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream. Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.") Reported-by: Eric Dumazet Reviewed-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 6d9719ef61a99d1ed750b510d32620a6c4bb7397 Author: Florian Westphal Date: Fri Feb 25 14:02:41 2022 +0100 netfilter: nf_queue: don't assume sk is full socket commit 747670fd9a2d1b7774030dba65ca022ba442ce71 upstream. There is no guarantee that state->sk refers to a full socket. If refcount transitions to 0, sock_put calls sk_free which then ends up with garbage fields. I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable debug work and pointing out state->sk oddities. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Tested-by: Oleksandr Natalenko Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 94c115d1380400f0001640619244dfe7a3a04772 Author: Leon Romanovsky Date: Tue Feb 8 16:14:32 2022 +0200 xfrm: enforce validity of offload input flags commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream. struct xfrm_user_offload has flags variable that received user input, but kernel didn't check if valid bits were provided. It caused a situation where not sanitized input was forwarded directly to the drivers. For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by strongswan, but not implemented in the kernel at all. As a solution, check and sanitize input flags to forward XFRM_OFFLOAD_INBOUND to the drivers. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Leon Romanovsky Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 33c4a43021acfb91e289b2d92e2db0f4a8fcf41e Author: Antony Antony Date: Tue Feb 1 07:51:57 2022 +0100 xfrm: fix the if_id check in changelink commit 6d0d95a1c2b07270870e7be16575c513c29af3f1 upstream. if_id will be always 0, because it was not yet initialized. Fixes: 8dce43919566 ("xfrm: interface with if_id 0 should return error") Reported-by: Pavel Machek Signed-off-by: Antony Antony Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit bdd8fc1b826e6f23963f5bef3f7431c6188ec954 Author: Eric Dumazet Date: Sun Feb 27 10:01:41 2022 -0800 netfilter: fix use-after-free in __nf_register_net_hook() commit 56763f12b0f02706576a088e85ef856deacc98a0 upstream. We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub.c:4454 kmalloc_node include/linux/slab.h:604 [inline] kvmalloc_node+0x97/0x100 mm/util.c:580 kvmalloc include/linux/slab.h:731 [inline] kvzalloc include/linux/slab.h:739 [inline] allocate_hook_entries_size net/netfilter/core.c:61 [inline] nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128 __nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 kvfree+0x42/0x50 mm/util.c:613 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Memory state around the buggy address: ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 2420b79f8c18 ("netfilter: debug: check for sorted array") Signed-off-by: Eric Dumazet Reported-by: syzbot Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 20fe64c54412ca42efb9ba07f856ed8cac6e007e Author: Jiri Bohac Date: Wed Jan 19 10:22:53 2022 +0100 xfrm: fix MTU regression commit 6596a0229541270fb8d38d989f91b78838e5e9da upstream. Commit 749439bfac6e1a2932c582e2699f91d329658196 ("ipv6: fix udpv6 sendmsg crash caused by too small MTU") breaks PMTU for xfrm. A Packet Too Big ICMPv6 message received in response to an ESP packet will prevent all further communication through the tunnel if the reported MTU minus the ESP overhead is smaller than 1280. E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead is 92 bytes. Receiving a PTB with MTU of 1371 or less will result in all further packets in the tunnel dropped. A ping through the tunnel fails with "ping: sendmsg: Invalid argument". Apparently the MTU on the xfrm route is smaller than 1280 and fails the check inside ip6_setup_cork() added by 749439bf. We found this by debugging USGv6/ipv6ready failures. Failing tests are: "Phase-2 Interoperability Test Scenario IPsec" / 5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation). Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu should return at least 1280 for ipv6") attempted to fix this but caused another regression in TCP MSS calculations and had to be reverted. The patch below fixes the situation by dropping the MTU check and instead checking for the underflows described in the 749439bf commit message. Signed-off-by: Jiri Bohac Fixes: 749439bfac6e ("ipv6: fix udpv6 sendmsg crash caused by too small MTU") Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 0b2ecc9163472128e7f30b517bee92dcd27ffc34 Author: Marek Vasut Date: Tue Feb 15 14:06:45 2022 +0100 ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min commit 9bdd10d57a8807dba0003af0325191f3cec0f11c upstream. While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first. Fixes: 817f7c9335ec0 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()") Signed-off-by: Marek Vasut Cc: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220215130645.164025-1-marex@denx.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 97968b4689f2cd5a97082ed0c37e0ead75c0cfb5 Author: Zhen Ni Date: Wed Mar 2 15:42:41 2022 +0800 ALSA: intel_hdmi: Fix reference to PCM buffer address commit 0aa6b294b312d9710804679abd2c0c8ca52cc2bc upstream. PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The driver needs to refer to substream->runtime->dma_addr instead for the buffer address. Signed-off-by: Zhen Ni Cc: Link: https://lore.kernel.org/r/20220302074241.30469-1-nizhen@uniontech.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit afe6ce8a574f536d6d1a5567811726a2385c2413 Author: Sergey Shtylyov Date: Sat Feb 19 23:04:29 2022 +0300 ata: pata_hpt37x: fix PCI clock detection [ Upstream commit 5f6b0f2d037c8864f20ff15311c695f65eb09db5 ] The f_CNT register (at the PCI config. address 0x78) is 16-bit, not 8-bit! The bug was there from the very start... :-( Signed-off-by: Sergey Shtylyov Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 6b432b7b5a77e8bfd041da0ba00c98fa31097c4e Author: Hangyu Hua Date: Sat Jan 1 01:21:38 2022 +0800 usb: gadget: clear related members when goto fail commit 501e38a5531efbd77d5c73c0ba838a889bfc1d74 upstream. dev->config and dev->hs_config and dev->dev need to be cleaned if dev_config fails to avoid UAF. Acked-by: Alan Stern Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20211231172138.7993-3-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman commit 70196d12856306a17ddc3eae0f022b9c1d748e52 Author: Hangyu Hua Date: Sat Jan 1 01:21:37 2022 +0800 usb: gadget: don't release an existing dev->buf commit 89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream. dev->buf does not need to be released if it already exists before executing dev_config. Acked-by: Alan Stern Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20211231172138.7993-2-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman commit 4e54c0b928affb7e91bdcec44bacec7b2b420d2f Author: Daniele Palmas Date: Tue Feb 15 12:13:35 2022 +0100 net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 [ Upstream commit 21e8a96377e6b6debae42164605bf9dcbe5720c5 ] Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 2fc08382eaf502551ffae61ff5e48e062b30ecb6 Author: Wolfram Sang Date: Sat Feb 12 20:47:07 2022 +0100 i2c: qup: allow COMPILE_TEST [ Upstream commit 5de717974005fcad2502281e9f82e139ca91f4bb ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 2ade8e36da84ab894592ee135f3734b78c714a8a Author: Wolfram Sang Date: Sat Feb 12 20:45:48 2022 +0100 i2c: cadence: allow COMPILE_TEST [ Upstream commit 0b0dcb3882c8f08bdeafa03adb4487e104d26050 ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang Acked-by: Michal Simek Signed-off-by: Sasha Levin commit f67ae583a11c04e594a543042182bd3782b70c77 Author: Yongzhi Liu Date: Sat Jan 15 21:34:56 2022 -0800 dmaengine: shdma: Fix runtime PM imbalance on error [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ] pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 2fe0e281f7ad0a62259649764228227dd6b2561d Author: Ronnie Sahlberg Date: Fri Feb 11 02:59:15 2022 +1000 cifs: fix double free race when mount fails in cifs_get_root() [ Upstream commit 3d6cc9898efdfb062efb74dc18cfc700e082f5d5 ] When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N Reviewed-by: Shyam Prasad N Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Sasha Levin commit a501a2f238e8f428033bd190fd6feccc7d44a108 Author: José Expósito Date: Tue Feb 8 09:59:16 2022 -0800 Input: clear BTN_RIGHT/MIDDLE on buttonpads [ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ] Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer Acked-by: Benjamin Tissoires Acked-by: Jiri Kosina Signed-off-by: José Expósito Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 7205a9b866ba89d6556ed9adb06208077cf5fce9 Author: Kai Vehmanen Date: Mon Feb 7 17:30:00 2022 +0200 ASoC: rt5682: do not block workqueue if card is unbound [ Upstream commit 4c33de0673ced9c7c37b3bbd9bfe0fda72340b2a ] The current rt5682_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Shuming Fan Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0fbb01bb0bd4b534d4d410bf62867e863ba5df29 Author: Kai Vehmanen Date: Mon Feb 7 17:29:59 2022 +0200 ASoC: rt5668: do not block workqueue if card is unbound [ Upstream commit a6d78661dc903d90a327892bbc34268f3a5f4b9c ] The current rt5668_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Shuming Fan Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 7f5829da251132527af274d2bbd8ed4a1b5a5d25 Author: Eric Anholt Date: Fri Feb 23 22:42:31 2018 +0100 i2c: bcm2835: Avoid clock stretching timeouts [ Upstream commit 9495b9b31abe525ebd93da58de2c88b9f66d3a0e ] The CLKT register contains at poweron 0x40, which at our typical 100kHz bus rate means .64ms. But there is no specified limit to how long devices should be able to stretch the clocks, so just disable the timeout. We still have a timeout wrapping the entire transfer. Signed-off-by: Eric Anholt Signed-off-by: Stefan Wahren BugLink: https://github.com/raspberrypi/linux/issues/3064 Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 4aee73beb5c8434416206d7c783fa487f24f0391 Author: JaeMan Park Date: Thu Jan 13 15:02:35 2022 +0900 mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work [ Upstream commit cacfddf82baf1470e5741edeecb187260868f195 ] In mac80211_hwsim, the probe_req frame is created and sent while scanning. It is sent with ieee80211_tx_info which is not initialized. Uninitialized ieee80211_tx_info can cause problems when using mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of ieee80211_tx_info and doesn't relay probe_req frame to other clients even if it is a broadcasting message. Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for the probe_req that is created by hw_scan_work in mac80211_hwsim. Signed-off-by: JaeMan Park Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com [fix memory leak] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit d9dd3aa0ed473206608198286a0a8c718155f305 Author: Benjamin Beichler Date: Tue Jan 11 22:13:26 2022 +0000 mac80211_hwsim: report NOACK frames in tx_status [ Upstream commit 42a79960ffa50bfe9e0bf5d6280be89bf563a5dd ] Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper statistics for non-acked frames. Signed-off-by: Benjamin Beichler Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin