commit 1f6f316a537d4310747b08f89fb32565317b288b Author: Greg Kroah-Hartman Date: Wed Mar 27 14:18:00 2019 +0900 Linux 5.0.5 commit a57af6d07512716b78f1a32d9426bcdf6aafc50c Author: Hui Wang Date: Tue Mar 19 09:28:44 2019 +0800 ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec commit b5a236c175b0d984552a5f7c9d35141024c2b261 upstream. Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d4d06 ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6c77789fb46e9ef076fb688383fcc6766e44d288 Author: Takashi Iwai Date: Tue Jan 29 14:03:33 2019 +0100 ALSA: hda - Record the current power state before suspend/resume calls commit 98081ca62cbac31fb0f7efaf90b2e7384ce22257 upstream. Currently we deal with single codec and suspend codec callbacks for all S3, S4 and runtime PM handling. But it turned out that we want distinguish the call patterns sometimes, e.g. for applying some init sequence only at probing and restoring from hibernate. This patch slightly modifies the common PM callbacks for HD-audio codec and stores the currently processed PM event in power_state of the codec's device.power field, which is currently unused. The codec callback can take a look at this event value and judges which purpose it's being called. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8bc3816d65668a4ce2b7347fdecc95bebdce6ff6 Author: Waiman Long Date: Wed Jan 9 23:03:25 2019 -0500 locking/lockdep: Add debug_locks check in __lock_downgrade() commit 71492580571467fb7177aade19c18ce7486267f5 upstream. Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by: Tetsuo Handa Reported-by: Tetsuo Handa Reported-by: syzbot+53383ae265fb161ef488@syzkaller.appspotmail.com Signed-off-by: Waiman Long Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 0830cf62f5290b2f878faacc2b6f32e77bc2ea12 Author: Jann Horn Date: Fri Mar 1 04:12:01 2019 +0100 x86/unwind: Add hardcoded ORC entry for NULL commit ac5ceccce5501e43d217c596e4ee859f2a3fef79 upstream. When the ORC unwinder is invoked for an oops caused by IP==0, it currently has no idea what to do because there is no debug information for the stack frame of NULL. But if RIP is NULL, it is very likely that the last successfully executed instruction was an indirect CALL/JMP, and it is possible to unwind out in the same way as for the first instruction of a normal function. Hardcode a corresponding ORC entry. With an artificially-added NULL call in prctl_set_seccomp(), before this patch, the trace is: Call Trace: ? __x64_sys_prctl+0x402/0x680 ? __ia32_sys_prctl+0x6e0/0x6e0 ? __do_page_fault+0x457/0x620 ? do_syscall_64+0x6d/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 After this patch, the trace looks like this: Call Trace: __x64_sys_prctl+0x402/0x680 ? __ia32_sys_prctl+0x6e0/0x6e0 ? __do_page_fault+0x457/0x620 do_syscall_64+0x6d/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 prctl_set_seccomp() still doesn't show up in the trace because for some reason, tail call optimization is only disabled in builds that use the frame pointer unwinder. Signed-off-by: Jann Horn Signed-off-by: Thomas Gleixner Acked-by: Josh Poimboeuf Cc: Borislav Petkov Cc: Andrew Morton Cc: syzbot Cc: "H. Peter Anvin" Cc: Masahiro Yamada Cc: Michal Marek Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20190301031201.7416-2-jannh@google.com Signed-off-by: Greg Kroah-Hartman commit 0312f3032e35670043fd14f5773f450ae13bd09c Author: Jann Horn Date: Fri Mar 1 04:12:00 2019 +0100 x86/unwind: Handle NULL pointer calls better in frame unwinder commit f4f34e1b82eb4219d8eaa1c7e2e17ca219a6a2b5 upstream. When the frame unwinder is invoked for an oops caused by a call to NULL, it currently skips the parent function because BP still points to the parent's stack frame; the (nonexistent) current function only has the first half of a stack frame, and BP doesn't point to it yet. Add a special case for IP==0 that calculates a fake BP from SP, then uses the real BP for the next frame. Note that this handles first_frame specially: Return information about the parent function as long as the saved IP is >=first_frame, even if the fake BP points below it. With an artificially-added NULL call in prctl_set_seccomp(), before this patch, the trace is: Call Trace: ? prctl_set_seccomp+0x3a/0x50 __x64_sys_prctl+0x457/0x6f0 ? __ia32_sys_prctl+0x750/0x750 do_syscall_64+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 After this patch, the trace is: Call Trace: prctl_set_seccomp+0x3a/0x50 __x64_sys_prctl+0x457/0x6f0 ? __ia32_sys_prctl+0x750/0x750 do_syscall_64+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Jann Horn Signed-off-by: Thomas Gleixner Acked-by: Josh Poimboeuf Cc: Borislav Petkov Cc: Andrew Morton Cc: syzbot Cc: "H. Peter Anvin" Cc: Masahiro Yamada Cc: Michal Marek Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20190301031201.7416-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman commit 1e641e63fe0c969ae21f46d739bc5b181911f1ba Author: Dongli Zhang Date: Mon Mar 18 20:23:17 2019 +0800 loop: access lo_backing_file only when the loop device is Lo_bound commit f7c8a4120eedf24c36090b7542b179ff7a649219 upstream. Commit 758a58d0bc67 ("loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and "lo->lo_state = Lo_unbound" into different critical regions protected by loop_ctl_mutex. However, there is below race that the NULL lo->lo_backing_file would be accessed when the backend of a loop is another loop device, e.g., loop0's backend is a file, while loop1's backend is loop0. loop0's backend is file loop1's backend is loop0 __loop_clr_fd() mutex_lock(&loop_ctl_mutex); lo->lo_backing_file = NULL; --> set to NULL mutex_unlock(&loop_ctl_mutex); loop_set_fd() mutex_lock_killable(&loop_ctl_mutex); loop_validate_file() f = l->lo_backing_file; --> NULL access if loop0 is not Lo_unbound mutex_lock(&loop_ctl_mutex); lo->lo_state = Lo_unbound; mutex_unlock(&loop_ctl_mutex); lo->lo_backing_file should be accessed only when the loop device is Lo_bound. In fact, the problem has been introduced already in commit 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which loop_validate_file() could see devices in Lo_rundown state with which it did not count. It was harmless at that point but still. Fixes: 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") Reported-by: syzbot+9bdc1adc1c55e7fe765b@syzkaller.appspotmail.com Signed-off-by: Dongli Zhang Reviewed-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit da75d37754011753db79d5d93fb9a2517446c3e6 Author: Florian Westphal Date: Tue Feb 19 00:37:21 2019 +0100 netfilter: ebtables: remove BUGPRINT messages commit d824548dae220820bdf69b2d1561b7c4b072783f upstream. They are however frequently triggered by syzkaller, so remove them. ebtables userspace should never trigger any of these, so there is little value in making them pr_debug (or ratelimited). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit a179695eddd9f94e89ede2cbbf2b27cf748d5070 Author: Linus Torvalds Date: Sun Mar 3 14:23:33 2019 -0800 aio: simplify - and fix - fget/fput for io_submit() commit 84c4e1f89fefe70554da0ab33be72c9be7994379 upstream. Al Viro root-caused a race where the IOCB_CMD_POLL handling of fget/fput() could cause us to access the file pointer after it had already been freed: "In more details - normally IOCB_CMD_POLL handling looks so: 1) io_submit(2) allocates aio_kiocb instance and passes it to aio_poll() 2) aio_poll() resolves the descriptor to struct file by req->file = fget(iocb->aio_fildes) 3) aio_poll() sets ->woken to false and raises ->ki_refcnt of that aio_kiocb to 2 (bumps by 1, that is). 4) aio_poll() calls vfs_poll(). After sanity checks (basically, "poll_wait() had been called and only once") it locks the queue. That's what the extra reference to iocb had been for - we know we can safely access it. 5) With queue locked, we check if ->woken has already been set to true (by aio_poll_wake()) and, if it had been, we unlock the queue, drop a reference to aio_kiocb and bugger off - at that point it's a responsibility to aio_poll_wake() and the stuff called/scheduled by it. That code will drop the reference to file in req->file, along with the other reference to our aio_kiocb. 6) otherwise, we see whether we need to wait. If we do, we unlock the queue, drop one reference to aio_kiocb and go away - eventual wakeup (or cancel) will deal with the reference to file and with the other reference to aio_kiocb 7) otherwise we remove ourselves from waitqueue (still under the queue lock), so that wakeup won't get us. No async activity will be happening, so we can safely drop req->file and iocb ourselves. If wakeup happens while we are in vfs_poll(), we are fine - aio_kiocb won't get freed under us, so we can do all the checks and locking safely. And we don't touch ->file if we detect that case. However, vfs_poll() most certainly *does* touch the file it had been given. So wakeup coming while we are still in ->poll() might end up doing fput() on that file. That case is not too rare, and usually we are saved by the still present reference from descriptor table - that fput() is not the final one. But if another thread closes that descriptor right after our fget() and wakeup does happen before ->poll() returns, we are in trouble - final fput() done while we are in the middle of a method: Al also wrote a patch to take an extra reference to the file descriptor to fix this, but I instead suggested we just streamline the whole file pointer handling by submit_io() so that the generic aio submission code simply keeps the file pointer around until the aio has completed. Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Acked-by: Al Viro Reported-by: syzbot+503d4cc169fcec1cb18c@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 1c0fc5e9cb408b41ff7c5f3c1ed102c94ce98f50 Author: Chao Yu Date: Mon Feb 25 17:11:03 2019 +0800 f2fs: fix to avoid deadlock of atomic file operations commit 48432984d718c95cf13e26d487c2d1b697c3c01f upstream. Thread A Thread B - __fput - f2fs_release_file - drop_inmem_pages - mutex_lock(&fi->inmem_lock) - __revoke_inmem_pages - lock_page(page) - open - f2fs_setattr - truncate_setsize - truncate_inode_pages_range - lock_page(page) - truncate_cleanup_page - f2fs_invalidate_page - drop_inmem_page - mutex_lock(&fi->inmem_lock); We may encounter above ABBA deadlock as reported by Kyungtae Kim: I'm reporting a bug in linux-4.17.19: "INFO: task hung in drop_inmem_page" (no reproducer) I think this might be somehow related to the following: https://groups.google.com/forum/#!searchin/syzkaller-bugs/INFO$3A$20task$20hung$20in$20%7Csort:date/syzkaller-bugs/c6soBTrdaIo/AjAzPeIzCgAJ ========================================= INFO: task syz-executor7:10822 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D27024 10822 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 schedule_preempt_disabled+0x18/0x30 kernel/sched/core.c:3617 __mutex_lock_common kernel/locking/mutex.c:833 [inline] __mutex_lock+0x5bd/0x1410 kernel/locking/mutex.c:893 mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:908 drop_inmem_page+0xcb/0x810 fs/f2fs/segment.c:327 f2fs_invalidate_page+0x337/0x5e0 fs/f2fs/data.c:2401 do_invalidatepage mm/truncate.c:165 [inline] truncate_cleanup_page+0x261/0x330 mm/truncate.c:187 truncate_inode_pages_range+0x552/0x1610 mm/truncate.c:367 truncate_inode_pages mm/truncate.c:478 [inline] truncate_pagecache+0x6d/0x90 mm/truncate.c:801 truncate_setsize+0x81/0xa0 mm/truncate.c:826 f2fs_setattr+0x44f/0x1270 fs/f2fs/file.c:781 notify_change+0xa62/0xe80 fs/attr.c:313 do_truncate+0x12e/0x1e0 fs/open.c:63 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e459c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e45a6cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e45a700 INFO: task syz-executor7:10858 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D28880 10858 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 __rwsem_down_write_failed_common kernel/locking/rwsem-xadd.c:565 [inline] rwsem_down_write_failed+0x5e6/0xc90 kernel/locking/rwsem-xadd.c:594 call_rwsem_down_write_failed+0x17/0x30 arch/x86/lib/rwsem.S:117 __down_write arch/x86/include/asm/rwsem.h:142 [inline] down_write+0x58/0xa0 kernel/locking/rwsem.c:72 inode_lock include/linux/fs.h:713 [inline] do_truncate+0x120/0x1e0 fs/open.c:61 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e3b4c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e3b56cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071c238 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e3b5700 INFO: task syz-executor5:10829 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor5 D28760 10829 6308 0x80000002 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 io_schedule+0x21/0x80 kernel/sched/core.c:5179 wait_on_page_bit_common mm/filemap.c:1100 [inline] __lock_page+0x2b5/0x390 mm/filemap.c:1273 lock_page include/linux/pagemap.h:483 [inline] __revoke_inmem_pages+0xb35/0x11c0 fs/f2fs/segment.c:231 drop_inmem_pages+0xa3/0x3e0 fs/f2fs/segment.c:306 f2fs_release_file+0x2c7/0x330 fs/f2fs/file.c:1556 __fput+0x2c7/0x780 fs/file_table.c:209 ____fput+0x1a/0x20 fs/file_table.c:243 task_work_run+0x151/0x1d0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ba/0x30a0 kernel/exit.c:865 do_group_exit+0x13b/0x3a0 kernel/exit.c:968 get_signal+0x6bb/0x1650 kernel/signal.c:2482 do_signal+0x84/0x1b70 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x155/0x190 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x445/0x4e0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f1c68e74ce8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000071bf80 RCX: 00000000004497b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000071bf80 RBP: 000000000071bf80 R08: 0000000000000000 R09: 000000000071bf58 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f1c68e759c0 R15: 00007f1c68e75700 This patch tries to use trylock_page to mitigate such deadlock condition for fix. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 648562c0a9583ec4927c7d5eba5259fe7785d314 Author: Myungho Jung Date: Wed Jan 9 22:27:31 2019 -0800 RDMA/cma: Rollback source IP address if failing to acquire device commit 5fc01fb846bce8fa6d5f95e2625b8ce0f8e86810 upstream. If cma_acquire_dev_by_src_ip() returns error in addr_handler(), the device state changes back to RDMA_CM_ADDR_BOUND but the resolved source IP address is still left. After that, if rdma_destroy_id() is called after rdma_listen(), the device is freed without removed from listen_any_list in cma_cancel_operation(). Revert to the previous IP address if acquiring device fails. Reported-by: syzbot+f3ce716af730c8f96637@syzkaller.appspotmail.com Signed-off-by: Myungho Jung Reviewed-by: Parav Pandit Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 244594c5f5c80c6505b4dd6a94bd1b847d24f38e Author: Tetsuo Handa Date: Sat Jan 19 01:43:43 2019 +0900 drm/vkms: Fix flush_work() without INIT_WORK(). commit b30b61ff6b1dc37f276cf56a8328b80086a3ffca upstream. syzbot is hitting a lockdep warning [1] because flush_work() is called without INIT_WORK() after kzalloc() at vkms_atomic_crtc_reset(). Commit 6c234fe37c57627a ("drm/vkms: Implement CRC debugfs API") added INIT_WORK() to only vkms_atomic_crtc_duplicate_state() side. Assuming that lifecycle of crc_work is appropriately managed, fix this problem by adding INIT_WORK() to vkms_atomic_crtc_reset() side. [1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770 Reported-and-tested-by: syzbot Signed-off-by: Tetsuo Handa Reviewed-by: Shayenne Moura Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1547829823-9877-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman commit 35228ce61a8160199d1ea4ced956116bba686192 Author: Kefeng Wang Date: Sat Feb 23 12:33:27 2019 +0800 Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto() commit 56897b217a1d0a91c9920cb418d6b3fe922f590a upstream. task A: task B: hci_uart_set_proto flush_to_ldisc - p->open(hu) -> h5_open //alloc h5 - receive_buf - set_bit HCI_UART_PROTO_READY - tty_port_default_receive_buf - hci_uart_register_dev - tty_ldisc_receive_buf - hci_uart_tty_receive - test_bit HCI_UART_PROTO_READY - h5_recv - clear_bit HCI_UART_PROTO_READY while() { - p->open(hu) -> h5_close //free h5 - h5_rx_3wire_hdr - h5_reset() //use-after-free } It could use ioctl to set hci uart proto, but there is a use-after-free issue when hci_uart_register_dev() fail in hci_uart_set_proto(), see stack above, fix this by setting HCI_UART_PROTO_READY bit only when hci_uart_register_dev() return success. Reported-by: syzbot+899a33dc0fa0dbaf06a6@syzkaller.appspotmail.com Signed-off-by: Kefeng Wang Reviewed-by: Jeremy Cline Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman commit c8d311117c3e45b55794ace66e098f6b622c356e Author: Jeremy Cline Date: Wed Feb 6 12:54:16 2019 -0500 Bluetooth: hci_ldisc: Initialize hci_dev before open() commit 32a7b4cbe93b0a0ef7e63d31ca69ce54736c4412 upstream. The hci_dev struct hdev is referenced in work queues and timers started by open() in some protocols. This creates a race between the initialization function and the work or timer which can result hdev being dereferenced while it is still null. The syzbot report contains a reliable reproducer which causes a null pointer dereference of hdev in hci_uart_write_work() by making the memory allocation for hdev fail. To fix this, ensure hdev is valid from before calling a protocol's open() until after calling a protocol's close(). Reported-by: syzbot+257790c15bcdef6fe00c@syzkaller.appspotmail.com Signed-off-by: Jeremy Cline Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman commit 4d18023ade55906b1e1f4983f59082f747499778 Author: Myungho Jung Date: Sat Feb 2 16:56:36 2019 -0800 Bluetooth: Fix decrementing reference count twice in releasing socket commit e20a2e9c42c9e4002d9e338d74e7819e88d77162 upstream. When releasing socket, it is possible to enter hci_sock_release() and hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread. The reference count of hdev should be decremented only once from one of them but if storing hdev to local variable in hci_sock_release() before detached from socket and setting to NULL in hci_sock_dev_event(), hci_dev_put(hdev) is unexpectedly called twice. This is resolved by referencing hdev from socket after bt_sock_unlink() in hci_sock_release(). Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com Signed-off-by: Myungho Jung Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman commit 572ae5c7646b36b06d8431682ebfca66229b2ff4 Author: Myungho Jung Date: Tue Jan 22 00:33:26 2019 -0800 Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf() commit 1dc2d785156cbdc80806c32e8d2c7c735d0b4721 upstream. h4_recv_buf() callers store the return value to socket buffer and recursively pass the buffer to h4_recv_buf() without protection. So, ERR_PTR returned from h4_recv_buf() can be dereferenced, if called again before setting the socket buffer to NULL from previous error. Check if skb is ERR_PTR in h4_recv_buf(). Reported-by: syzbot+017a32f149406df32703@syzkaller.appspotmail.com Signed-off-by: Myungho Jung Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman commit c35a32eb2339531f0ecd502c397f9cc2b87c4c54 Author: Hans Verkuil Date: Tue Dec 18 08:37:08 2018 -0500 media: v4l2-ctrls.c/uvc: zero v4l2_event commit f45f3f753b0a3d739acda8e311b4f744d82dc52a upstream. Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by: Hans Verkuil Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit c29313c07f2d956c4c6c34ce998beabeddc1f5ff Author: zhangyi (F) Date: Sat Mar 23 11:43:05 2019 -0400 ext4: brelse all indirect buffer in ext4_ind_remove_space() commit 674a2b27234d1b7afcb0a9162e81b2e53aeef217 upstream. All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by: Hulk Robot Signed-off-by: zhangyi (F) Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit f1902fd02d56a912b56a5eaa43d51221d8d3224b Author: Lukas Czerner Date: Thu Mar 14 23:20:25 2019 -0400 ext4: fix data corruption caused by unaligned direct AIO commit 372a03e01853f860560eade508794dd274e9b390 upstream. Ext4 needs to serialize unaligned direct AIO because the zeroing of partial blocks of two competing unaligned AIOs can result in data corruption. However it decides not to serialize if the potentially unaligned aio is past i_size with the rationale that no pending writes are possible past i_size. Unfortunately if the i_size is not block aligned and the second unaligned write lands past i_size, but still into the same block, it has the potential of corrupting the previous unaligned write to the same block. This is (very simplified) reproducer from Frank // 41472 = (10 * 4096) + 512 // 37376 = 41472 - 4096 ftruncate(fd, 41472); io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376); io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472); io_submit(io_ctx, 1, &iocbs[1]); io_submit(io_ctx, 1, &iocbs[2]); io_getevents(io_ctx, 2, 2, events, NULL); Without this patch the 512B range from 40960 up to the start of the second unaligned write (41472) is going to be zeroed overwriting the data written by the first write. This is a data corruption. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 With this patch the data corruption is avoided because we will recognize the unaligned_aio and wait for the unwritten extent conversion. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 * 0000b200 Reported-by: Frank Sorenson Signed-off-by: Lukas Czerner Signed-off-by: Theodore Ts'o Fixes: e9e3bcecf44c ("ext4: serialize unaligned asynchronous DIO") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 635218fee409e6f02f220d12a86b3ef79a9c9170 Author: Jiufei Xue Date: Thu Mar 14 23:19:22 2019 -0400 ext4: fix NULL pointer dereference while journal is aborted commit fa30dde38aa8628c73a6dded7cb0bba38c27b576 upstream. We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9bef84d ("ext4: Wait for proper transaction commit on fsync") Signed-off-by: Jiufei Xue Signed-off-by: Theodore Ts'o Reviewed-by: Joseph Qi Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 5b099547f29d0e21c2982a4697ababd2f9dd55ea Author: Takashi Iwai Date: Mon Feb 18 14:38:06 2019 +0100 ALSA: ac97: Fix of-node refcount unbalance commit 31d2350d602511efc9ef626b848fe521233b0387 upstream. ac97_of_get_child_device() take the refcount of the node explicitly via of_node_get(), but this leads to an unbalance. The for_each_child_of_node() loop itself takes the refcount for each iteration node, hence you don't need to take the extra refcount again. Fixes: 2225a3e6af78 ("ALSA: ac97: add codecs devicetree binding") Reviewed-by: Robert Jarzmik Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1fa1bfef5f4c526ab707101f900cc09587f1dd9a Author: Hui Wang Date: Tue Mar 19 09:28:43 2019 +0800 ALSA: hda - Don't trigger jackpoll_work in azx_resume commit 744c67ffeb06f2d2493f4049ba0bd19698ce0adf upstream. The commit 3baffc4a84d7 (ALSA: hda/intel: Refactoring PM code) changed the behaviour of azx_resume(), it triggers the jackpoll_work after applying this commit. This change introduced a new issue, all codecs are runtime active after S3, and will not call runtime_suspend() automatically. The root cause is the jackpoll_work calls snd_hda_power_up/down_pm, and it calls up_pm before snd_hdac_enter_pm is called, while calls the down_pm in the middle of enter_pm and leave_pm is called. This makes the dev->power.usage_count unbalanced after S3. To fix it, let azx_resume() don't trigger jackpoll_work as before it did. Fixes: 3baffc4a84d7 ("ALSA: hda/intel: Refactoring PM code") Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2b1cf1a17a41c356981f25d31bb658df53d970dc Author: Steve French Date: Fri Mar 22 22:31:17 2019 -0500 SMB3: Fix SMB3.1.1 guest mounts to Samba commit 8c11a607d1d9cd6e7f01fd6b03923597fb0ef95a upstream. Workaround problem with Samba responses to SMB3.1.1 null user (guest) mounts. The server doesn't set the expected flag in the session setup response so we have to do a similar check to what is done in smb3_validate_negotiate where we also check if the user is a null user (but not sec=krb5 since username might not be passed in on mount for Kerberos case). Note that the commit below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for cases where there is no user (even if server forgets to set the flag in the response) since we don't have anything useful to sign with. This is especially important now that the more secure SMB3.1.1 protocol is in the default dialect list. An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed the guest mounts to Windows. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by: Ronnie Sahlberg Reviewed-by: Paulo Alcantara CC: Stable Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 809ecabb6d418d0f711d0cb0d58743c41d4be9f4 Author: Atish Patra Date: Fri Mar 22 14:54:11 2019 -0700 clocksource/drivers/riscv: Fix clocksource mask commit 32d0be018f6f5ee2d5d19c4795304613560814cf upstream. For all riscv architectures (RV32, RV64 and RV128), the clocksource is a 64 bit incrementing counter. Fix the clock source mask accordingly. Tested on both 64bit and 32 bit virt machine in QEMU. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Atish Patra Signed-off-by: Thomas Gleixner Reviewed-by: Anup Patel Cc: Albert Ou Cc: Daniel Lezcano Cc: linux-riscv@lists.infradead.org Cc: Palmer Dabbelt Cc: Anup Patel Cc: Damien Le Moal Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com Signed-off-by: Greg Kroah-Hartman commit 70c1b15faf8b1885a89072d959869cd22a7bfafb Author: Rasmus Villemoes Date: Tue Mar 12 18:33:46 2019 +0100 irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp commit 89dc891792c2e046b030f87600109c22209da32e upstream. The lpi_range_list is supposed to be sorted in ascending order of ->base_id (at least if the range merging is to work), but the current comparison function returns a positive value if rb->base_id > ra->base_id, which means that list_sort() will put A after B in that case - and vice versa, of course. Fixes: 880cb3cddd16 (irqchip/gic-v3-its: Refactor LPI allocator) Cc: stable@vger.kernel.org (v4.19+) Signed-off-by: Rasmus Villemoes Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit dfa011546d27afb6c189261b5fb78db0bf9f44f3 Author: Josh Poimboeuf Date: Mon Mar 18 19:09:38 2019 -0500 objtool: Move objtool_file struct off the stack commit 0c671812f152b628bd87c0af49da032cc2a2c319 upstream. Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73fe7eb ("objtool: Add several performance improvements") Reported-by: Vassili Karpov Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman commit 198092b82db30f959e4999153d7a99f80b31f6f8 Author: Adrian Hunter Date: Mon Mar 4 15:13:21 2019 +0200 perf probe: Fix getting the kernel map commit eaeffeb9838a7c0dec981d258666bfcc0fa6a947 upstream. Since commit 4d99e4136580 ("perf machine: Workaround missing maps for x86 PTI entry trampolines"), perf tools has been creating more than one kernel map, however 'perf probe' assumed there could be only one. Fix by using machine__kernel_map() to get the main kernel map. Signed-off-by: Adrian Hunter Tested-by: Joseph Qi Acked-by: Masami Hiramatsu Cc: Alexander Shishkin Cc: Andy Lutomirski Cc: Greg Kroah-Hartman Cc: Jiufei Xue Cc: Peter Zijlstra Cc: stable@vger.kernel.org Cc: Xu Yu Fixes: 4d99e4136580 ("perf machine: Workaround missing maps for x86 PTI entry trampolines") Fixes: d83212d5dd67 ("kallsyms, x86: Export addresses of PTI entry trampolines") Link: http://lkml.kernel.org/r/2ed432de-e904-85d2-5c36-5897ddc5b23b@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 3bff3aabd58634b437a1dd7a7c099c4f270abf89 Author: Ronnie Sahlberg Date: Thu Mar 21 14:59:02 2019 +1000 cifs: allow guest mounts to work for smb3.11 commit e71ab2aa06f731a944993120b0eef1556c63b81c upstream. Fix Guest/Anonymous sessions so that they work with SMB 3.11. The commit noted below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for Guest/Anonumous sessions. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by: Ronnie Sahlberg CC: Stable Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 8dfb1e702caa46124669964fac5ebdab040137f3 Author: Chen Jie Date: Fri Mar 15 03:44:38 2019 +0000 futex: Ensure that futex address is aligned in handle_futex_death() commit 5a07168d8d89b00fe1760120714378175b3ef992 upstream. The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core") Signed-off-by: Chen Jie Signed-off-by: Thomas Gleixner Cc: Cc: Cc: Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com Signed-off-by: Greg Kroah-Hartman commit 72b8c5492f48c8bdee1dddef1c0ef4020a31dd4c Author: Tyrel Datwyler Date: Wed Mar 20 13:41:51 2019 -0500 scsi: ibmvscsi: Fix empty event pool access during host removal commit 7f5203c13ba8a7b7f9f6ecfe5a4d5567188d7835 upstream. The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: # v2.6.12+ Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit bc1bf16d7defec622e3d9a13b841d079e73063eb Author: Tyrel Datwyler Date: Wed Mar 20 13:41:50 2019 -0500 scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton commit 7205981e045e752ccf96cf6ddd703a98c59d4339 upstream. For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: # v4.10+ Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit e109bf21f4c61a869237a107249687d3c0f7e9ea Author: Quinn Tran Date: Fri Mar 15 15:04:18 2019 -0700 scsi: qla2xxx: Fix FC-AL connection target discovery commit 4705f10e82c63924bd84a9b31d15839ec9ba3d06 upstream. Commit 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") fixed N2N target discovery for local loop. However, same code is used for FC-AL discovery as well. Added check to make sure we are bypassing area and domain check only in N2N topology for target discovery. Fixes: 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit abe481cfe98329a4bed82f3d7d910c8c638a4e77 Author: Bart Van Assche Date: Fri Mar 15 16:27:58 2019 -0700 scsi: core: Avoid that a kernel warning appears during system resume commit 17605afaae825b0291f80c62a7f6565879edaa8a upstream. Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Ming Lei Cc: Johannes Thumshirn Cc: Oleksandr Natalenko Cc: Martin Steigerwald Cc: Reported-by: Jisheng Zhang Tested-by: Jisheng Zhang Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit e846d79bc1ba095482c3a2472c1a7cd2ef962e19 Author: Yishai Hadas Date: Wed Mar 6 19:20:50 2019 +0200 net/mlx5: Fix DCT creation bad flow commit f84b66b9cce78e8f9d38204fdaa75f07c75f4911 upstream. In case the DCT creation command has succeeded a DRAIN must be issued before calling DESTROY. In addition, the original code used the wrong parameter for the DESTROY command, 'in' instead of 'din', which caused another creation try instead of destroying. Cc: # 4.15 Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 62362ccdd45c741ac82c1a9cb033669b4e591154 Author: Michael Ellerman Date: Thu Mar 21 15:24:33 2019 +1100 powerpc/security: Fix spectre_v2 reporting commit 92edf8df0ff2ae86cc632eeca0e651fd8431d40d upstream. When I updated the spectre_v2 reporting to handle software count cache flush I got the logic wrong when there's no software count cache enabled at all. The result is that on systems with the software count cache flush disabled we print: Mitigation: Indirect branch cache disabled, Software count cache flush Which correctly indicates that the count cache is disabled, but incorrectly says the software count cache flush is enabled. The root of the problem is that we are trying to handle all combinations of options. But we know now that we only expect to see the software count cache flush enabled if the other options are false. So split the two cases, which simplifies the logic and fixes the bug. We were also missing a space before "(hardware accelerated)". The result is we see one of: Mitigation: Indirect branch serialisation (kernel only) Mitigation: Indirect branch cache disabled Mitigation: Software count cache flush Mitigation: Software count cache flush (hardware accelerated) Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Michael Ellerman Reviewed-by: Michael Neuling Reviewed-by: Diana Craciun Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit 7f5ffb4c7a710c1f441817cbeca7ca5aecc5f4ef Author: Michael Ellerman Date: Thu Mar 14 00:14:38 2019 +1100 powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038 commit b5b4453e7912f056da1ca7572574cada32ecb60c upstream. Jakub Drnec reported: Setting the realtime clock can sometimes make the monotonic clock go back by over a hundred years. Decreasing the realtime clock across the y2k38 threshold is one reliable way to reproduce. Allegedly this can also happen just by running ntpd, I have not managed to reproduce that other than booting with rtc at >2038 and then running ntp. When this happens, anything with timers (e.g. openjdk) breaks rather badly. And included a test case (slightly edited for brevity): #define _POSIX_C_SOURCE 199309L #include #include #include #include long get_time(void) { struct timespec tp; clock_gettime(CLOCK_MONOTONIC, &tp); return tp.tv_sec + tp.tv_nsec / 1000000000; } int main(void) { long last = get_time(); while(1) { long now = get_time(); if (now < last) { printf("clock went backwards by %ld seconds!\n", last - now); } last = now; sleep(1); } return 0; } Which when run concurrently with: # date -s 2040-1-1 # date -s 2037-1-1 Will detect the clock going backward. The root cause is that wtom_clock_sec in struct vdso_data is only a 32-bit signed value, even though we set its value to be equal to tk->wall_to_monotonic.tv_sec which is 64-bits. Because the monotonic clock starts at zero when the system boots the wall_to_montonic.tv_sec offset is negative for current and future dates. Currently on a freshly booted system the offset will be in the vicinity of negative 1.5 billion seconds. However if the wall clock is set past the Y2038 boundary, the offset from wall to monotonic becomes less than negative 2^31, and no longer fits in 32-bits. When that value is assigned to wtom_clock_sec it is truncated and becomes positive, causing the VDSO assembly code to calculate CLOCK_MONOTONIC incorrectly. That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which it is not meant to do. Worse, if the time is then set back before the Y2038 boundary CLOCK_MONOTONIC will jump backward. We can fix it simply by storing the full 64-bit offset in the vdso_data, and using that in the VDSO assembly code. We also shuffle some of the fields in vdso_data to avoid creating a hole. The original commit that added the CLOCK_MONOTONIC support to the VDSO did actually use a 64-bit value for wtom_clock_sec, see commit a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") (Nov 2005). However just 3 days later it was converted to 32-bits in commit 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)"), and the bug has existed since then AFAICS. Fixes: 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)") Cc: stable@vger.kernel.org # v2.6.15+ Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.cz Reported-by: Jakub Drnec Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit 9e063d979422bced2e0783f66943e70055e2540b Author: Archer Yan Date: Fri Mar 8 03:29:19 2019 +0000 MIPS: Fix kernel crash for R6 in jump label branch function commit 47c25036b60f27b86ab44b66a8861bcf81cde39b upstream. Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by: Archer Yan Reviewed-by: Paul Burton [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Greg Kroah-Hartman commit de21552cc84833d72598d54a552ca3b291cc6ca3 Author: Yasha Cherikovsky Date: Fri Mar 8 14:58:51 2019 +0200 MIPS: Ensure ELF appended dtb is relocated commit 3f0a53bc6482fb09770982a8447981260ea258dc upstream. This fixes booting with the combination of CONFIG_RELOCATABLE=y and CONFIG_MIPS_ELF_APPENDED_DTB=y. Sections that appear after the relocation table are not relocated on system boot (except .bss, which has special handling). With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the vmlinux ELF, so it must be relocated together with everything else. Fixes: 069fd766271d ("MIPS: Reserve space for relocation table") Signed-off-by: Yasha Cherikovsky Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Greg Kroah-Hartman commit 63703e8fd2af25f5b946eff504d7e74fc19fe16d Author: Yifeng Li Date: Tue Mar 5 06:00:22 2019 +0800 mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction. commit 5f5f67da9781770df0403269bc57d7aae608fecd upstream. Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in cascade_irqaction, MFGPT interrupts will be masked in suspend mode, and the machine would be unable to resume once suspended. Previously, MIPS IRQs were not disabled properly, so the original code appeared to work. Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to cascade_irqaction. This commit is functionally identical to 0add9c2f1cff ("MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot to apply the same fix to Loongson2. Signed-off-by: Yifeng Li Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: Jiaxun Yang Cc: Huacai Chen Cc: Ralf Baechle Cc: James Hogan Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Greg Kroah-Hartman commit e88f693e6e8d43678c1af5d7305755098ea4d26b Author: Jan Kara Date: Mon Mar 11 15:04:18 2019 +0100 udf: Fix crash on IO error during truncate commit d3ca4651d05c0ff7259d087d8c949bcf3e14fb46 upstream. When truncate(2) hits IO error when reading indirect extent block the code just bugs with: kernel BUG at linux-4.15.0/fs/udf/truncate.c:249! ... Fix the problem by bailing out cleanly in case of IO error. CC: stable@vger.kernel.org Reported-by: jean-luc malet Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 48cce130d485275c0b04e4031629d3c9d62326be Author: Ilya Dryomov Date: Wed Mar 20 09:46:58 2019 +0100 libceph: wait for latest osdmap in ceph_monc_blacklist_add() commit bb229bbb3bf63d23128e851a1f3b85c083178fa1 upstream. Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b41515 ("libceph: support for blacklisting clients") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit 027584c8ef01eececbb4eca218ebcf301ab1231d Author: Robert Richter Date: Wed Mar 20 18:57:23 2019 +0000 iommu/iova: Fix tracking of recently failed iova address commit 80ef4464d5e27408685e609d389663aad46644b9 upstream. If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy Signed-off-by: Robert Richter Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit 98e2c51c1ac3d1599c221944c5aecb5868c1605d Author: Stanislaw Gruszka Date: Wed Mar 13 10:03:17 2019 +0100 iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE commit 4e50ce03976fbc8ae995a000c4b10c737467beaa upstream. Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org Reported-and-tested-by: Jan Viktorin Reviewed-by: Alexander Duyck Signed-off-by: Stanislaw Gruszka Fixes: 80187fd39dcb ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit 0c113ec08d71ad237ea87d3d6b55f20d0ab1a42c Author: Deepak Rawat Date: Thu Feb 28 10:29:54 2019 -0800 drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's commit 4b9ce3a651a37c60527101db4451a315a8b9588f upstream. If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: Fixes: 4eb085e42fde ("drm/vmwgfx: Convert to new IDA API") Signed-off-by: Deepak Rawat Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom Signed-off-by: Greg Kroah-Hartman commit 5618b16763ce38b53aa3677744771f971c145322 Author: Thomas Zimmermann Date: Mon Mar 18 15:47:58 2019 +0100 drm/vmwgfx: Don't double-free the mode stored in par->set_mode commit c2d311553855395764e2e5bf401d987ba65c2056 upstream. When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann Reviewed-by: Deepak Rawat Signed-off-by: Thomas Hellstrom Signed-off-by: Greg Kroah-Hartman commit 109f5f9dff14a5a9d28a48218d04cdf81c370d6b Author: Christian König Date: Mon Mar 18 11:09:54 2019 +0100 drm/amdgpu: fix invalid use of change_bit commit 72464382fc2d3673eb51f21a57f2c0a320c1552f upstream. We only need to clear the bit in a 32bit integer. This fixes a crah on ARM64 and PPC64LE caused by "drm/amdgpu: update the vm invalidation engine layout V2" Signed-off-by: Christian König Acked-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit cdb57f82a4bc54d3de2108eec8f855b46ead6934 Author: Wolfram Sang Date: Tue Mar 19 11:12:59 2019 +0100 mmc: renesas_sdhi: limit block count to 16 bit for old revisions commit c9a9497ccef205ed4ed2e247011382627876d831 upstream. R-Car Gen2 has two different SDHI incarnations in the same chip. The older one does not support the recently introduced 32 bit register access to the block count register. Make sure we use this feature only after the first known version. Thanks to the Renesas Testing team for this bug report! Fixes: 5603731a15ef ("mmc: tmio: fix access width of Block Count Register") Reported-by: Yoshihiro Shimoda Signed-off-by: Wolfram Sang Reviewed-by: Simon Horman Tested-by: Phong Hoang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 1494408bf8638fdfeb4cdce923ae0645c62ca0a9 Author: Alexander Shiyan Date: Sun Mar 17 12:58:25 2019 +0300 mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" commit 2b77158ffa92b820a0c5da9a3c6ead7aa069c71c upstream. This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [] lr : [] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [] (mxcmci_datawork) from [] (process_one_work+0x1f0/0x338) [] (process_one_work) from [] (worker_thread+0x320/0x474) [] (worker_thread) from [] (kthread+0xfc/0x118) [] (kthread) from [] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 7e682a01b11110f0193c5808930149d7ac2826c9 Author: Daniel Drake Date: Wed Mar 20 14:36:53 2019 +0800 mmc: alcor: fix DMA reads commit 5ea47691bd99e1100707ec63364aff72324e2af4 upstream. Setting max_blk_count to 1 here was causing the mmc block layer to always use the MMC_READ_SINGLE_BLOCK command here, which the driver does not DMA-accelerate. Drop the max_blk_ settings here. The mmc host defaults suffice, along with the max_segs and max_seg_size settings, which I have now documented in more detail. Now each MMC command reads 4 512-byte blocks, using DMA instead of PIO. On my SD card, this increases read performance (measured with dd) from 167kb/sec to 4.6mb/sec. Link: http://lkml.kernel.org/r/CAD8Lp47L5T3jnAjBiPs1cQ+yFA3L6LJtgFvMETnBrY63-Zdi2g@mail.gmail.com Signed-off-by: Daniel Drake Reviewed-by: Oleksij Rempel Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit cc8cd197411baebacec3a31c319d86c2ace4bfdd Author: Arnd Bergmann Date: Thu Mar 7 11:09:19 2019 +0100 mmc: pxamci: fix enum type confusion commit e60a582bcde01158a64ff948fb799f21f5d31a11 upstream. clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b7140951 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Acked-by: Robert Jarzmik Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit ae833c3eefaf9b1e08978048d460bb9ae406acad Author: Takashi Sakamoto Date: Sun Mar 17 15:49:29 2019 +0900 ALSA: firewire-motu: use 'version' field of unit directory to identify model commit 2d012c65a9ca26a0ef87ea0a42f1653dd37155f5 upstream. Current ALSA firewire-motu driver uses the value of 'model' field of unit directory in configuration ROM for modalias for MOTU FireWire models. However, as long as I checked, Pre8 and 828mk3(Hybrid) have the same value for the field (=0x100800). unit | version | model --------------- | --------- | ---------- 828mkII | 0x000003 | 0x101800 Traveler | 0x000009 | 0x107800 Pre8 | 0x00000f | 0x100800 <- 828mk3(FW) | 0x000015 | 0x106800 AudioExpress | 0x000033 | 0x104800 828mk3(Hybrid) | 0x000035 | 0x100800 <- When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3, I got change of the value from 0x100800 to 0x103800. On the other hand, the value of 'version' field is fixed to 0x00000f. As a quick glance, the higher 12 bits of the value of 'version' field represent firmware version, while the lower 12 bits is unknown. By induction, the value of 'version' field represents actual model. This commit changes modalias to match the value of 'version' field, instead of 'model' field. For degug, long name of added sound card includes hexadecimal value of 'model' field. Fixes: 6c5e1ac0e144 ("ALSA: firewire-motu: add support for Motu Traveler") Signed-off-by: Takashi Sakamoto Cc: # v4.19+ Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 3c09233b5dee8b1d9503b9c1399fca2fac4b1ff8 Author: Jaroslav Kysela Date: Mon Mar 18 13:45:43 2019 +0100 ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist commit 721f1e6c1fd137e7e2053d8e103b666faaa2d50c upstream. Another machine which does not like the power saving (noise): https://bugzilla.redhat.com/show_bug.cgi?id=1689623 Also, reorder the Lenovo C50 entry to keep the table sorted. Reported-by: hs.guimaraes@outlook.com Signed-off-by: Jaroslav Kysela Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman